FURIOUSGOLD] MTK CODE READER V1.0.0.268 Released

12/03/2013 [FURIOUSGOLD] MTK CODE READER V1.0.0.268 Released

---

more details goes here: FuriousGold® The World Famous Unlocking Tool - MTK CODE READER


more to come soon.

Read More

HTC Amaze4G PH8510000 (HTC Ruby) Unbrick, Unlock, SuperCID, IMEI repair supported Repairing bricked HTC Amaze4G is easy with the RIFF Box.

 Phone is auto powered on with USB Data Cable connected to the PC while battery is connected.

Resurrector will reflash radio’s boot zone and will re-write PDA’s HBOOT version 1.92.0000.

There is option to reflash BOOT and RECOVERY zones.

In addition, you can set S-OFF (unlock HBOOT so you will be able to
flash any ROM) by clicking “Make S-OFF” checkbox in the resurrector
settings.


To resurrect HTC Amaze4G:

•  Solder JTAG cable to HTC Amaze4G JTAG pads;


•  Insert batter and connect USB Data cable;


•  Make sure HTC Amaze4G is selected in the list of models;


•  If you use only battery, press Power On key;


•  Click Resurrect button;


•  Wait till software signals a successful operation completion;


•  Disconnect power supply, de-solder JTAG wires;

Now phone is in bootable condition, that is, even if it does not
start up normally you can flash it using known flashing methods.


To enter download mode:

•  Disconnect PC cable;


•  Insert battery;


•  Hold ‘Volume Down’ key and press ‘Power ON’ button.

.

Read More

HTC Desire C NFC A320e (HTC Golf) Unbrick, Unlock, SuperCID, IMEI repair supported Repairing bricked HTC Desire C (PL0110000) is easy with the RIFF Box.

 Phone is auto powered on with USB Data Cable connected to the PC. Battery presence may be required.

In case you have no USB cable near, make sure battery is charged enough
and hold Power On button during initiation of JTAG connection.

Resurrector will reflash radio’s boot zone and will re-write PDA’s SPL
to 1.25.0000 version. Additionally to SPL and Radio zones, the zone
which contains Model ID may be re-flashed too. In this case after
resurrection the phone will have Model ID = ‘PL0110000’.


To resurrect HTC Desire C (PL0110000):

•  Solder JTAG cable to HTC Desire C (PL0110000) JTAG pads;


•  Insert USB Data cable into board and PC;


•  Make sure HTC Desire C (PL0110000) is selected in the list of models;


•  If you use battery, press Power On key;


•  Click Resurrect button;


•  Wait till software signals a successful operation completion;


•  Disconnect power supply, de-solder JTAG wires;

Now phone is in bootable condition, that is, even if it does not
start up normally, you can flash it using known flashing methods.


To enter download mode:

•  Disconnect PC cable;


•  Insert battery;


•  Hold ‘Volume Down’ key and press ‘Power ON’ button.

.

Read More

Samsung GT-P3100 Galaxy Tab 2 7.0 Unbrick – Dead boot repair supported Samsung P3100 is based on the OMAP4430 Processor (Cortex-A9 Dual-Core).

 JTAG pads are very small; professional experience in soldering is required to connect wires to the JTAG interface.

Please note: The initial loader in the Samsung P3100 is XLOADER. Due to
OMAP4430’s some peculiar TrustZone security features current resurrector
will boot only in case XLOADER is alive. That’s why model name of
current resurrector has additional text: ‘XLoader+’. In case XLOADER is
damaged (which happens for example after wrong firmware reflash), you
will have to use different resurrector DLL – the one with the ‘XLoader-”
delimiter.


To resurrect Samsung P3100:

•  Solder JTAG cable to Samsung P3100 JTAG pads;


•  Connect USB cable to phone and PC;


•  Insert battery;


•  Make sure Samsung P3100 is selected in the list of models;


•  Make sure a fixed TCK frequency is selected;


•  Click Resurrect button;


•  Wait till software signals a successful operation completion;


•  Disconnect USB cable, de-solder JTAG wires;

Now phone is in bootable condition, that is, even if it does not
start up normally, you can flash it using original Samsung downloader
software to restore it to the working state.


To enter download mode:

•  Disconnect PC cable;


•  Insert battery;


•  Hold ‘Volume Down’ key and press Power-On.

.

Read More

Samsung GT-S6500D Galaxy Mini 2 (Samsung Jena) Unbrick – Dead boot repair supported Repairing bricked Samsung S6500D is easy with the RIFF Box.

 Note, one simple way to connect over JTAG – connect USB cable to PC and
insert battery. In this case phone is automatically powered on, so no
need to press any power-on buttons on the phone keypad.
To resurrect Samsung S6500D:

•  Solder JTAG cable to Samsung S6500D JTAG pads;


•  Insert USB Data cable into board and PC;


•  Make sure Samsung S6500D is selected in the list of models;


•  Click Resurrect button;


•  Wait till software signals a successful operation completion;


•  Disconnect power supply, de-solder JTAG wires;

Now phone is in bootable condition, that is, even if it does not
start up normally, you can flash it using known flashing methods.


To enter download mode:

•  Disconnect PC cable;


•  Insert battery;


•  Hold ‘Volume Down’ and ‘Home’ keys and press Power-On.

.

Read More

Pantech Vega R3 IM-A850L Unbrick – Dead boot repair supported Repairing bricked Pantech A850L is easy with the RIFF Box

.
To resurrect Pantech A850L:

•  Solder JTAG cable to Pantech A850L JTAG pads;


•  Insert Pantech A850L into any USB port for power;


•  Make sure Pantech A850L is selected in the list of models;


•  Click Resurrect button;


•  Select areas to be repaired in the settings window;


•  Wait till software signals a successful operation completion;


•  De-solder JTAG wires;

To enter download mode:

•  Disconnect PC cable;


•  Insert battery;


•  Hold both ‘Volume Up’ and ‘Volume Down’ keys and press Power-On.
  After phone has entered Boot menu, select ‘PDL Download’ to set Software
  Upgrading Mode.

.

Read More

Samsung GT-P3113 Galaxy Tab 2 7.0 Unbrick – Dead boot repair supported Samsung P3113 is based on the OMAP4430 Processor (Cortex-A9 Dual-Core).

JTAG pads are very small; professional experience in soldering is required to connect wires to the JTAG interface.

Please note: The initial loader in the Samsung P3113 is XLOADER. Due to
OMAP4430’s some peculiar TrustZone security features current resurrector
will boot only in case XLOADER is alive. That’s why model name of
current resurrector has additional text: ‘XLoader+’. In case XLOADER is
damaged (which happens for example after wrong firmware reflash), you
will have to use different resurrector DLL – the one with the ‘XLoader-”
delimiter.


To resurrect Samsung P3113:

•  Solder JTAG cable to Samsung P3113 JTAG pads;


•  Connect USB cable to phone and PC;


•  Insert battery;


•  Make sure Samsung P3113 is selected in the list of models;


•  Make sure a fixed TCK frequency is selected;


•  Click Resurrect button;


•  Wait till software signals a successful operation completion;


•  Disconnect USB cable, de-solder JTAG wires;

Now phone is in bootable condition, that is, even if it does not
start up normally, you can flash it using original Samsung downloader
software to restore it to the working state.


To enter download mode:

•  Disconnect PC cable;


•  Insert battery;


•  Hold ‘Volume Down’ key and press Power-On.

Read More