Symphony X120 __ WiFi __ Flash File
Friday, 15 March 2013
21:41
Samsung SGH-T879 Galaxy Note Unbrick – Dead Boot repair supported Repairing bricked Samsung T879 is easy with the RIFF Box
. The device is based on the Qualcomm APQ8060 chipset.
Note, one simple way to connect over JTAG – connect USB cable to PC and
insert battery. In this case phone is automatically powered on.
To resurrect Samsung T879:
- Solder JTAG cable to Samsung T879 JTAG pads;
- Connect USB cable to phone and PC;
- Insert battery;
- Make sure Samsung T879 is selected in the list of models;
- Click Resurrect button;
- Wait till software signals a successful operation completion;
- Disconnect USB cable, de-solder JTAG wires;
Now phone is in bootable condition, that is, even if it does not
start up normally, you can flash it using original Samsung downloader
software to restore it to the working state.
To enter download mode:
- Disconnect PC cable;
- Insert battery;
- Hold ‘Volume Down’ key and press Power-On.
.
21:40
HTC Desire V T328w (HTC Wind) Unbrick, IMEI, SuperCID, Boot repair supported Repairing bricked HTC DesireV (PL1110000) is easy with the RIFF Box.
Phone is auto powered on with USB Data Cable connected to the PC. Battery presence may be required.
In case you have no USB cable near, make sure battery is charged enough
and hold Power On button during initiation of JTAG connection.
Resurrector will reflash radio’s boot zone and will re-write PDA’s SPL
to 1.14.0001 version. Additionally to SPL and Radio zones, the zone
which contains Model ID is re-flashed too. Thus after resurrection phone
will have Model ID = ‘PL1110000’.
To resurrect HTC DesireV (PL1110000):
- Solder JTAG cable to HTC DesireV (PL1110000) JTAG pads;
- Insert USB Data cable into board and PC;
- Make sure HTC DesireV (PL1110000) is selected in the list of models;
- If you use battery, press Power On key;
- Click Resurrect button;
- Wait till software signals a successful operation completion;
- Disconnect power supply, de-solder JTAG wires;
Now phone is in bootable condition, that is, even if it does not
start up normally, you can flash it using known flashing methods.
To enter download mode:
- Disconnect PC cable;
- Insert battery;
- Hold ‘Volume Down’ key and press ‘Power ON’ button.
.
21:38
T-Mobile Pulse (Huawei U8220) Unbrick – Dead Boot repair supported Repairing bricked Huawei U8220 is easy with the RIFF Box.
To resurrect Huawei U8220:
- Solder JTAG cable to Huawei U8220 JTAG pads;
- Connect Huawei U8220 tablet’s charger for power;
- Make sure Huawei U8220 is selected in the list of models;
- Click Resurrect button;
- Wait till software signals a successful operation completion;
- De-solder JTAG wires;
Now device is in bootable condition, that is, even if it does not
start up normally, you can flash it using known flashing methods.
.
21:37
Samsung GT-S7562 Galaxy S Duos Unbrick – Dead Boot repair supported Repairing bricked Samsung S7562 is easy with the RIFF Box.
Note, one simple way to connect over JTAG – connect USB cable to PC and
insert battery. In this case phone is automatically powered on, so no
need to press any power-on buttons on the phone keypad.
To resurrect Samsung S7562:
- Solder JTAG cable to Samsung S7562 JTAG pads;
- Insert USB Data cable into board and PC;
- Make sure Samsung S7562 is selected in the list of models;
- Click Resurrect button;
- Wait till software signals a successful operation completion;
- Disconnect power supply, de-solder JTAG wires;
Now phone is in bootable condition, that is, even if it does not
start up normally, you can flash it using known flashing methods.
To enter download mode:
- Disconnect PC cable;
- Insert battery;
- Hold ‘Volume Down’ and ‘Home’ keys and press Power-On.
.
21:36
Nokia Lumia 610 Unbrick – Dead Boot repair supported
Repairing bricked Nokia Lumia 610 is easy with the RIFF Box.
Note, one simple way to connect over JTAG – connect USB cable to PC and
insert battery. In this case phone is automatically powered on, so no
need to press any power-on buttons on the phone keypad.
To resurrect Nokia Lumia 610:
- Solder JTAG cable to Nokia Lumia 610 JTAG pads;
- Insert USB Data cable into board and PC;
- Make sure Nokia Lumia 610 is selected in the list of models;
- Click Resurrect button;
- Wait till software signals a successful operation completion;
- Disconnect power supply, de-solder JTAG wires;
Now phone is in bootable condition, that is, even if it does not
start up normally, you can flash it using known flashing methods.
.
21:36
Samsung GT-P5110 Galaxy Tab 2 10.1 WiFi Unbrick – Dead Boot repair supported
Samsung P5110 is based on the OMAP4430 Processor (Cortex-A9
Dual-Core). JTAG pads are very small; professional experience in
soldering is required to connect wires to the JTAG interface.
Please note: The initial loader in the Samsung P5110 is XLOADER. Due to
OMAP4430’s some peculiar TrustZone security features current resurrector
will boot only in case XLOADER is alive. That’s why model name of
current resurrector has additional text: ‘XLoader+’. In case XLOADER is
damaged (which happens for example after wrong firmware reflash), you
will have to use different resurrector DLL – the one with the ‘XLoader-”
delimiter.
To resurrect Samsung P5110:
- Solder JTAG cable to Samsung P5110 JTAG pads;
- Connect USB cable to phone and PC;
- Insert battery;
- Make sure Samsung P5110 is selected in the list of models;
- Make sure a fixed TCK frequency is selected;
- Click Resurrect button;
- Wait till software signals a successful operation completion;
- Disconnect USB cable, de-solder JTAG wires;
Now phone is in bootable condition, that is, even if it does not
start up normally, you can flash it using original Samsung downloader
software to restore it to the working state.
To enter download mode:
- Disconnect PC cable;
- Insert battery;
- Hold ‘Volume Down’ key and press Power-On.
.
Subscribe to:
Posts (Atom)
