Martech Analyzer PB243

From now you can also send print tests and give it to your customers.

How to do it? Just connect Analyzer to PC and user print function.



Typical tests are below, also some screens from Analyzer display :







































Resellers welcome !

Read More

Connection points for all eeprom IBM ThinkPad

A2* Series you treat it as a 24RF08



Includes A20m A20p A21m A21p A22m A22p



Locating the A2* series connection points



Switch the A2* OFF.



You should have downloaded the hardware Maintenance Manual already, if you have not done so,



Download the Hardware Maintenance Manual (HMM) for your TP model



The link above is to the IBM/Lenovo site, if it doesn't work, don't panic, it isn't broken, their site is shut down daily for maintenance and at those times they display spurious messages like the page you requested cannot be found, wait a good while and try again.



Using the HMM link above, once you select a model and are on the page that has the PDF HMM for that model, it is best to right click on the PDF HMM for your model then select Save Target AS, that way you will have the PDF HMM on your PC to refer to any time you need it.



Locating the eeprom



Follow the section in the A2* Hardware Maintenance Manual titled "FRU System Board" to dismantle your TP and gain access to the underside of the System Board where the 24RF08 eeprom is located.



NOTE: VCC is NOT connected, the ThinkPad supplies power to the eeprom later on we will switch on the TP to analyse the eeprom.



ssembling your TP



You need to re-assemble your TP as you will have to have it switched ON and running to read the eeprom.



Follow the Hardware Maintenance Manual [FRU System Board], very carefully, double check screw type and size for each individual module. Assemble the TP in the reverse order used to dismantle it.







Disclaimer



I make no warranty that any of my information is correct, or safe, or does or does not breach any warranty clause, or anything else, it is up to you to decide if you will follow all or any of the instructions to recover the Supervisor Password from a TP. It is up to you to decide, I am not responsible for the results or for any consequential or incidental damages whatsoever.

Read More

MAXX MSD7 Blinking Done

MAXX MSD7 Blinking Don

---

Read More

World First Nokia C8 (SPD 6530) Read, Write , Format, Unlock Done Only Volcano Box

Read info


Read Flash


Format


Write Flash


Unlock Code

Read More

World First New Flash Chip 8852DL(J5000) Fead Flash Done

world first new flash chip 8852DL(J5000) read user area (nv data) done





world first new flash chip 8852DL(J5000) read unlocking code by find password method done



here is photo of new RDA cpu

Read More

iPhone 4S logo only ( SOLVED ) by piranha box

---

tools needed



iphone usb cable



piranha box



procedure



open software



select SPD SC6530A



select low baudrate like this 46800



READ FLASH FILE FIRST







AFTER THAT WRITE FULL FLASH











AFTER ALL







GAMES STILL WOPRKING LIKE B4

Read More

Cherry Mobile D11 Mini Error Keypadlocked Solved by piranhabox

---

cherry mobile d11 mini error keypadlocked solved by piranhabox

first readinfo

unlock

inter keypad locked code

error

click readinfo again

thn format



result



thanks

Read More