Info:-
OCTENN_T12_PCB01_GSM_MT6252_S01.OCTENN_T12_V1_0_8_ .BIN
Thursday, 25 April 2013
06:45
01:31
Wednesday, 24 April 2013
23:54
SC03D unlock done very fast by smartsambox
SC03D unlock done very fast by smartsambox
micro-USB cable:
1. Phone must be powered on.
2. Type *#7284# and choose Modem for both options.
3. Type *#9090# and choose USB Diag.
4. Reboot phone.
5. Connect USB cable, install drivers.
6. Select diagnostic port in port settings.
7. Press "Unlock" button
result
21:56
Symphony FT45 Flash Ok
Detection initiated, connect the phone and power on it...
Vcc: null
Gnd: 4 5
Analyzing Rx and Tx...
MT6255, RX: 3, TX: 2
Setting...
Pinouts setting complete!
File versicustom\common\hal\custom_emi_MT6255.c0
Searching for passwords...
*778#[SMS lock]
Found 1 possible passwords.
[Privacy Lock]0000034
Waiting for phone's response,please press Power on/off button
Connecting...
Hardware version:CA02
Software version:0002
CPU TYPE:6255
Internal version:8A00
Recommend you use V5.1205 BOOT.
>>Boot downloading...
Connecting...
Hardware version:CA02
Software version:0002
CPU TYPE:6255
Internal version:8A00
Boot downloading complete!
Flash ID: 009800B1
Flash Type: NAND_TC58NYG0S8C
Chip Capacity: 0x8000000(128MB)
Baud adjust...complete.
Flash reading...88%
>>C:\VolcanoBox\PrtScn\PIC_2013_04_25_10_46_19_AM.jpg Flash reading complete!
Spend time: 513.3 s
>>The data has been saved in Q:\GPG Flash Files\Z\Z__All\China Set Flash File\Symphonny ALL Mobile\FT45\Symphony__45 Ok Set.bin, size: 132 M.
Download
21:18
Repairing bricked HTC 8S (PM5910002) is easy with the RIFF Box.
Phone is auto powered on with USB Data Cable connected to the PC while battery is connected.
Additionally to SPL and Radio zones, the zone which contains Model ID is
re-flashed too. Thus after resurrection phone will have Model ID =
‘PM5910002’.
To resurrect HTC 8S (PM5910002):
- Solder JTAG cable to HTC 8S (PM5910002) JTAG pads;
- Insert batter and connect USB Data cable;
- Make sure HTC 8S (PM5910002) is selected in the list of models;
- If you use only battery, press Power On key;
- Click Resurrect button;
- Wait till software signals a successful operation completion;
- Disconnect power supply, de-solder JTAG wires;
Now phone is in bootable condition, that is, even if it does not
start up normally you can flash it using known flashing methods.
To enter download mode:
- Disconnect PC cable;
- Insert battery;
- Hold ‘Volume Down’ key and press ‘Power ON’ button.
.
21:17
HTC EVO 3D CDMA Unbrick, Unlock, IMEI, SuperCID repair supported Repairing bricked HTC Evo3D CDMA (PG8610000) is easy with the RIFF Box.
Phone is auto powered on with USB Data Cable connected to the PC while battery is connected.
Resurrector will reflash radio’s boot zone and will re-write PDA’s HBOOT version 1.50.0000.
There is option to reflash BOOT and RECOVERY zones.
To resurrect HTC Evo3D CDMA (PG8610000):
- Solder JTAG cable to HTC Evo3D CDMA (PG8610000) JTAG pads;
- Insert batter and connect USB Data cable;
- Make sure HTC Evo3D CDMA (PG8610000) is selected in the list of models;
- If you use only battery, press Power On key;
- Click Resurrect button;
- Wait till software signals a successful operation completion;
- Disconnect power supply, de-solder JTAG wires;
Now phone is in bootable condition, that is, even if it does not
start up normally you can flash it using known flashing methods.
To enter download mode:
- Disconnect PC cable;
- Insert battery;
- Hold ‘Volume Down’ key and press ‘Power ON’ button.
.
21:17
HTC Windows Phone 8X LTE 16GB Unbrick, Unlock, IMEI, SuperCID repair supported Repairing bricked HTC 8X (PM2320000) is easy with the RIFF Box.
Phone is auto powered on with USB Data Cable connected to the PC while battery is connected.
Additionally to SPL and Radio zones, the zone which contains Model ID is
re-flashed too. Thus after resurrection phone will have Model ID =
‘PM232****’.
To resurrect HTC 8X (PM2320000):
- Solder JTAG cable to HTC 8X (PM2320000) JTAG pads;
- Insert batter and connect USB Data cable;
- Make sure HTC 8X (PM2320000) is selected in the list of models;
- If you use only battery, press Power On key;
- Click Resurrect button;
- Wait till software signals a successful operation completion;
- Disconnect power supply, de-solder JTAG wires;
Now phone is in bootable condition, that is, even if it does not
start up normally you can flash it using known flashing methods.
To enter download mode:
- Disconnect PC cable;
- Insert battery;
- Hold ‘Volume Down’ key and press ‘Power ON’ button.
.
Subscribe to:
Posts (Atom)
