Android Mobile Doctor

Code: VOLCANO FILE NOT READ 2 TIME TRAI

Code: MIRACAL FILE READ & PASWORD READ

Submission On
BlackBerry Z10 & Q10 world Wide Service
Working Very Fast (Any Operater) (Any Country)
TIME DURATION 24-48 WORKING HOURS

ATF v9.84

Release Date: May 09, 2013
Firmware Version Required : 10.3.50

*** Only Available via the AutoUpdate Server ***

Fixed Read Firmware Information via Flash Mode for some RAPU based phones (E5-00, C5-00, E6-00 etc...)

################################################## #######################################
ATF v9.83

Release Date: May 08, 2013
Firmware Version Required : 10.3.50

*** Only Available via the AutoUpdate Server ***

1.
Lumia WP8 Recovery Flashing Added

Supported Phones:

All Lumia WP8 Phones

This will allow re-flashing of Lumia Phones which encountered an error
during a previous firmware update (incomplete flashing). This will only
work if BOOT Loaders are still OK.

To perform recovery flashing:
1. Run ATF Software, load the flash WP8 Flash File and click FLASH.

2. Hold VOLUME_DOWN + POWER button until the phone will vibrate.

3. Release VOLUME_DOWN + POWER button then connect USB Cable.

4. Recovery Flashing will start and will Fix Partitions.

2.
BB5 Read Firmware Version via Flash Mode

Supported Phones:

All Single-CPU BB5 Phones (RAP3, RAPIDO, RAPUv1, RAPUv2, Broadcom and XG223)

NOT Supported Phones:

All Dual-CPU BB5 Phones (E90, N90, N95, N95-8GB, N73, N80 etc...)

This
will allow you to know the current firmware version inside the phone
just in case the phone is dead. It will also prevent you from
accidentally DOWNGRADING any BB5 Phone. USB and FBUS Connection are both
supported.

To check current firmware version:
1. Click "Buscheck" or "Backup RPL" Button

3.
Added Alternative USB Boot Method in Settings

In Settings --> Nokia Settings, check this:

Use BB5 USB Boot Settings Type 2 (Fixes Booting Problem on some PC)

If you get BB5 Booting Problems stuck at:

"FUR_Control_AddClient_BB5() ASIC_INDEX_CMT (Ready)"

* Complete Product Listing in Nokia.ini (as of May-08-2013)

################################################## #######################################
ATF v9.80

Release Date: April 30, 2013
Firmware Version Required : 10.3.50

Lumia Windows Phone 8.0 Dead Boot Repair via TP (First In The World!)

Supported Phones:

Lumia 520T RM-913
Lumia 520 RM-914
Lumia 520 RM-915
Lumia 521 RM-917
Lumia 620 RM-846
Lumia 720 RM-885
Lumia 720T RM-887

Supported Partition Repairs:

M.B.R. (Master Boot Record)
G.P.T. (GUID Partition Table)
SBL1
SBL2
SBL3
UEFI
RPM
TZ
WINSECAPP

Custom Read/Write eMMC Blocks also supported. The password is still
"password" in HEX format.

(Hint: RPL and Simlocks are inside a FAT12 Mountable Partition called DPP)

Added Test Point Pictures for 520T, 520, 521, 620, 720 and 720T

What's New ?

* Lumia Windows Phone 8.0 Dead Boot Repair via TP
* ATF FiRE Server Capable EXE (Flash Files/Links are still uploading)

Bug Fixes:

* Fixed Lumia Custom eMMC Read/Write Bug on new Hynix eMMC
* Fixed SD Card Custom Password Masking

Other Stuff

* Complete Product Listing in Nokia.ini (as of April-30-2013)

For this Update I give Special Thanks To:

X-shadow's Wife for editing the Test Point Pictures for the new Lumia Windows 8.0 Phones.

Who will buy this if you can get more in ATF?

Phone is auto powered on with USB Data Cable connected to the PC. Battery presence may be required.

In case you have no USB cable near, make sure battery is charged enough
and hold Power On button during initiation of JTAG connection.

Resurrector will reflash radio’s boot zone and will re-write PDA’s SPL
to 1.27.0000 version. Additionally to SPL and Radio zones, the zone
which contains Model ID is re-flashed too. Thus after resurrection phone
will have Model ID = ‘PK7810000’.

To resurrect HTC DesireVC (PK7810000):

Solder JTAG cable to HTC DesireVC (PK7810000) JTAG pads;

Insert USB Data cable into board and PC;

Make sure HTC DesireVC (PK7810000) is selected in the list of models;

If you use battery, press Power On key;

Click Resurrect button;

Wait till software signals a successful operation completion;

Disconnect power supply, de-solder JTAG wires;

Now phone is in bootable condition, that is, even if it does not
start up normally, you can flash it using known flashing methods.

To enter download mode:

Disconnect PC cable;

Insert battery;

Hold ‘Volume Down’ key and press ‘Power ON’ button.

.

Hi,

In ATF 9.83 onwards, you will see FIRMWARE VERSION of the phone when you click Buscheck or Backup RPL Button.

Here are some examples:

Phone Type: 5130c
Connection Type: FBUS