SAMSUNG CHINA N7100 IMEI REPAIR SUCCESSFULLY JUST ONE CLICK

Read More

MIRACLE BOX NOT CONECTED

SOLUTION HERE

IF YOU HAVE THIS BOX


THEN DOWNLOAD SETUP FILE THIS FOLDER


IF YOU HAVE THIS BOX


THEN DOWNLOAD SETUP FILE FROM THIS FOLDER

IF NOT SOLVED THEN SURE TO CONECT YOUR BOX
AND SEE RED AND BLUE LIGHT IS ON OR NOT
IF NOT THEN NEED TO CONTACT YOUR RESSLER

Read More

Micromax x288 dead recover

MICROMAX X288

DEAD RECOVER BY FORMATE ONLY



NOTE-FLASH FILE NOW AVAIBALE IN MIRACLE SUPPORT AREA

Read More

YBZ i867 COOLSEND CPU READ CODE/FLASH FILE

YBZ i867 COOLSEND 8851E CPU

16MB FLASH FILE

READ PHONE CODE


READ FLASH FILE

Read More

HTC One VX (HTC Totem C2) Supported Repairing bricked HTC OneVX (PM3610000) is easy with the RIFF Box.

 Phone is auto powered on with USB Data Cable connected to the PC. Battery presence may be required.

In case you have no USB cable near, make sure battery is charged enough
and hold Power On button during initiation of JTAG connection.

Resurrector will reflash radio’s boot zone and will re-write PDA’s SPL
to 0.31.0013 version. Additionally to SPL and Radio zOneVX, the zone
which contains Model ID is re-flashed too. Thus after resurrection phone
will have Model ID = ‘PM3610000’.

To resurrect HTC OneVX:

•  Solder JTAG cable to HTC OneVX JTAG pads;


•  Insert USB Data cable into board and PC;


•  Make sure HTC OneVX (PM3610000) is selected in the list of models;


•  If you use battery, press Power On key;


•  Click Resurrect button;


•  Wait till software signals a successful operation completion;


•  Disconnect power supply, de-solder JTAG wires;

Now phone is in bootable condition, that is, even if it does not
start up normally, you can flash it using known flashing methods.

To enter download mode:

•  Disconnect PC cable;


•  Insert battery;


•  Hold ‘Volume Down’ key and press ‘Power ON’ button.

.

Read More

Samsung SGH-i337 Galaxy S 4 LTE (Samsung Altius) Supported Repairing bricked Samsung I337 is easy with the RIFF Box.

Phone is auto powered on with USB Data Cable connected to the PC while
battery is inserted. Please note, battery must be charged. If battery is
not charged enough there is chance of getting 0×42 error during
connection stage.

To resurrect Samsung I337:

•  Solder JTAG cable to Samsung I337 JTAG pads;


•  Connect USB cable or instert batteryu;


•  Make sure Samsung I337 is selected in the list of models;


•  Click Resurrect button;


•  Wait till software signals a successful operation completion;


•  Disconnect power supply, de-solder JTAG wires;

Now phone is in bootable condition, that is, even if it does not
start up normally, you can flash it using known flashing methods.

.

Read More

Samsung SGH-i437 Galaxy Express Supported Repairing bricked Samsung I437 is easy with the RIFF Box.

 The device is based on the Qualcomm MSM8960 chipset.

Note, one simple way to connect over JTAG – connect USB cable to PC and
insert battery. In this case phone is automatically powered on.

To resurrect Samsung I437:

•  Solder JTAG cable to Samsung I437 JTAG pads;


•  Connect USB cable to phone and PC;


•  Insert battery;


•  Make sure Samsung I437 is selected in the list of models;


•  Click Resurrect button;


•  Wait till software signals a successful operation completion;


•  Disconnect USB cable, de-solder JTAG wires;

Now phone is in bootable condition, that is, even if it does not
start up normally, you can flash it using original Samsung downloader
software to restore it to the working state.

To enter download mode:

•  Disconnect PC cable;


•  Insert battery;


•  Hold ‘Volume Down’ key and press Power-On.

.

Read More