Pantech Vega No6 IM-A860S boot repair supported Repairing bricked Pantech A860S is easy with the RIFF Box.

To resurrect Pantech A860S:

•  Solder JTAG cable to Pantech A860S JTAG pads;


•  Insert Pantech A860S into any USB port for power;


•  Make sure Pantech A860S is selected in the list of models;


•  Click Resurrect button;


•  Select areas to be repaired in the settings window;


•  Wait till software signals a successful operation completion;


•  De-solder JTAG wires;

.

Read More

Pantech Vega LTE M IM-A810S SKY boot repair supported Repairing bricked Pantech A810S is easy with the RIFF Box.

To resurrect Pantech A810S:

•  Solder JTAG cable to Pantech A810S JTAG pads;


•  Insert Pantech A810S into any USB port for power;


•  Make sure Pantech A810S is selected in the list of models;


•  Click Resurrect button;


•  Select areas to be repaired in the settings window;


•  Wait till software signals a successful operation completion;


•  De-solder JTAG wires;

.

Read More

Pantech Vega IM-A650S boot repair supported Repairing bricked Pantech A650S is easy with the RIFF Box. To resurrect Pantech A650S

•  Solder JTAG cable to Pantech A650S JTAG pads;


•  Insert Pantech A650S into any USB port for power;


•  Make sure Pantech A650S is selected in the list of models;


•  Click Resurrect button;


•  Select areas to be repaired in the settings window;


•  Wait till software signals a successful operation completion;


•  De-solder JTAG wires;

.

Read More

LG F260S Optimus LTE III boot repair supported

Repairing bricked LG F260S with the RIFF Box requires non-beginner
soldering skills (since JTAG pads on board are very small and are close
to each other).

Phone is auto powered on with USB Data Cable connected to the PC while
battery is inserted. Please note, battery must be charged. If battery is
not charged enough there is chance of getting 0×42 error during
connection stage.

To resurrect LG F260S:

•  Solder JTAG cable to LG F260S JTAG pads;


•  Insert USB Data cable into board and PC;


•  Make sure LG F260S is selected in the list of models;


•  Click Resurrect button;


•  Wait till software signals a successful operation completion;


•  Disconnect power supply, de-solder JTAG wires;

Now phone is in bootable condition, that is, even if it does not
start up normally, you can flash it using known flashing methods

To enter emergency mode:

•  Disconnect PC cable;


•  Insert battery;


•  Hold both ‘Volume down’ and ‘Camera’ keys and press ‘Power ON’ button.

.

Read More

LG E960 Nexus 4 (LG Mako) boot repair supported

Repairing bricked LG E960 with the RIFF Box requires non-beginner
soldering skills (since JTAG pads on board are very small and are close
to each other).

Phone is auto powered on with USB Data Cable connected to the PC while
battery is inserted. Please note, battery must be charged. If battery is
not charged enough there is chance of getting 0×42 error during
connection stage.

To resurrect LG E960:

•  Solder JTAG cable to LG E960 JTAG pads;


•  Insert USB Data cable into board and PC;


•  Make sure LG E960 is selected in the list of models;


•  Click Resurrect button;


•  Wait till software signals a successful operation completion;


•  Disconnect power supply, de-solder JTAG wires;

Now phone is in bootable condition, that is, even if it does not
start up normally, you can flash it using known flashing methods

To enter emergency mode:

•  Disconnect PC cable;


•  Insert battery;


•  Hold both ‘Volume down’ and ‘Camera’ key

.

Read More

LG E975 Optimus G (LG Gee) boot repair supported

Repairing bricked LG E975 with the RIFF Box requires non-beginner
soldering skills (since JTAG pads on board are very small and are close
to each other).

Phone is auto powered on with USB Data Cable connected to the PC while
battery is inserted. Please note, battery must be charged. If battery is
not charged enough there is chance of getting 0×42 error during
connection stage.

To resurrect LG E975:

•  Solder JTAG cable to LG E975 JTAG pads;


•  Insert USB Data cable into board and PC;


•  Make sure LG E975 is selected in the list of models;


•  Click Resurrect button;


•  Wait till software signals a successful operation completion;


•  Disconnect power supply, de-solder JTAG wires;

Now phone is in bootable condition, that is, even if it does not
start up normally, you can flash it using known flashing methods

To enter emergency mode:

•  Disconnect PC cable;


•  Insert battery;


•  Hold both ‘Volume down’ and ‘Camera’ keys and press ‘Power ON’ button.

.

Read More

LG E970 Optimus G (LG Gee) boot repair supported

Repairing bricked LG E970 with the RIFF Box requires non-beginner
soldering skills (since JTAG pads on board are very small and are close
to each other).

Phone is auto powered on with USB Data Cable connected to the PC while
battery is inserted. Please note, battery must be charged. If battery is
not charged enough there is chance of getting 0×42 error during
connection stage.


To resurrect LG E970:

•  Solder JTAG cable to LG E970 JTAG pads;


•  Insert USB Data cable into board and PC;


•  Make sure LG E970 is selected in the list of models;


•  Click Resurrect button;


•  Wait till software signals a successful operation completion;


•  Disconnect power supply, de-solder JTAG wires;

Now phone is in bootable condition, that is, even if it does not
start up normally, you can flash it using known flashing methods


To enter emergency mode:

•  Disconnect PC cable;


•  Insert battery;


•  Hold both ‘Volume down’ and ‘Camera’ keys and press ‘Power ON’ button.

.

Read More