Easy boot repair LG F220K (Optimus GK) supported

by admin on Oct.12, 2013, under News

12.10.2013  RIFF JTAG – Easy boot repair LG F220K (Optimus GK) supported

Repairing
bricked LG F220K with the RIFF Box requires non-beginner soldering
skills (since JTAG pads on board are very small and are close to each
other).
Phone is auto powered on with USB Data Cable connected to
the PC while battery is inserted. Please note, battery must be charged.
If battery is not charged enough there is chance of getting 0×42 error
during connection stage.

To resurrect LG F220K:

•  Solder JTAG cable to LG F220K JTAG pads;


•  Insert USB Data cable into board and PC;


•  Make sure LG F220K is selected in the list of models;


•  Click Resurrect button;


•  Wait till software signals a successful operation completion;


•  Disconnect power supply, de-solder JTAG wires;

Now
phone is in bootable condition, that is, even if it does not start up
normally, you can flash it using known flashing methods.
.

Read More

Easy repair LG F200K Optimus Vu II supported

Repairing bricked LG F200K is easy with the RIFF Box. The device is based on the Qualcomm MSM8960 chipset.

Note, one simple way to connect over JTAG – connect USB cable to PC and
insert battery. In this case phone is automatically powered on.

To resurrect LG F200K:

•  Solder JTAG cable to LG F200K JTAG pads;


•  Connect USB cable to phone and PC;


•  Insert battery;


•  Make sure LG F200K is selected in the list of models;


•  Click Resurrect button;


•  Wait till software signals a successful operation completion;


•  Disconnect USB cable, de-solder JTAG wires;

Now
phone is in bootable condition, that is, even if it does not start up
normally, you can flash it using original Samsung downloader software to
restore it to the working state.

To enter download mode:

•  Disconnect PC cable;


•  Insert battery;


•  Hold ‘Volume Down’ key and press Power-On.

.

Read More

Easy boot repair Samsung SGH-T999L Galaxy S III LTE supported

Repairing bricked Samsung T999L is easy with the RIFF Box. The device is based on the Qualcomm MSM8960 chipset.

Note, one simple way to connect over JTAG – connect USB cable to PC and
insert battery. In this case phone is automatically powered on.

To resurrect Samsung T999L:

•  Solder JTAG cable to Samsung T999L JTAG pads;


•  Connect USB cable to phone and PC;


•  Insert battery;


•  Make sure Samsung T999L is selected in the list of models;


•  Click Resurrect button;


•  Wait till software signals a successful operation completion;


•  Disconnect USB cable, de-solder JTAG wires;

Now
phone is in bootable condition, that is, even if it does not start up
normally, you can flash it using original Samsung downloader software to
restore it to the working state.

To enter download mode:

•  Disconnect PC cable;


•  Insert battery;


•  Hold ‘Volume Down’ key and press Power-On.

.

Read More

Easy boot repair Samsung GT-i9195 Galaxy S4 Mini LTE (Samsung Serrano) supported

Repairing bricked Samsung I9195 is easy with the RIFF Box.

Phone is auto powered on with USB Data Cable connected to the PC while
battery is inserted. Please note, battery must be charged. If battery is
not charged enough there is chance of getting 0×42 error during
connection stage.

To resurrect Samsung I9195:

•  Solder JTAG cable to Samsung I9195 JTAG pads;


•  Connect USB cable or insert battery;


•  Make sure Samsung I9195 is selected in the list of models;


•  Click Resurrect button;


•  Wait till software signals a successful operation completion;


•  Disconnect power supply, de-solder JTAG wires;

Now
phone is in bootable condition, that is, even if it does not start up
normally, you can flash it using known flashing methods.
.

Read More

Samsung Galaxy Ace Duos I589 Unbrick – dead boot repair supported

Repairing
bricked Samsung I589 is easy with the RIFF Box. Phone is auto powered
when USB Data Cable is inserted while battery is inside. If you don’t
use USB cable, make sure to hold Power On button during JTAG connection
establishing phase.

To resurrect Samsung I589 do this:

•  Solder JTAG cable to Samsung I589 JTAG pads;


•  Insert battery and connect USB cable to phone and PC;


•  Make sure Samsung I589 is selected in the list of models;


•  Click Resurrect button;


•  Wait few seconds until software signals a successful operation completion;


•  Disconnect USB cable, de-solder JTAG wires;

Now
phone is in bootable condition, that is, even if it does not start up
normally, you can flash it using original Samsung downloader software to
restore it to the working state.
.

Read More

Samsung 4G LTE Mobile Hotspot SCH-LC11 Unbrick supported

Repairing bricked Samsung LC11 is easy with the RIFF Box.

To resurrect Samsung LC11:

•  Solder JTAG cable to Samsung LC11 JTAG pads;


•  Insert USB Data cable into board and PC;


•  Make sure Samsung LC11 is selected in the list of models;


•  Click Resurrect button;


•  Wait till software signals a successful operation completion;


•  Disconnect power supply, de-solder JTAG wires;

Now
device is in bootable condition, that is, even if it does not start up
normally, you can flash it using known flashing methods.
.

Read More

LG E975W Optimus GJ (LG Gee B) Unbrick – dead boot repair supported

Repairing
bricked LG E975W with the RIFF Box requires non-beginner soldering
skills (since JTAG pads on board are very small and are close to each
other).
Phone is auto powered on with USB Data Cable connected to
the PC while battery is inserted. Please note, battery must be charged.
If battery is not charged enough there is chance of getting 0×42 error
during connection stage.

To resurrect LG E975W:

•  Solder JTAG cable to LG E975W JTAG pads;


•  Insert USB Data cable into board and PC;


•  Make sure LG E975W is selected in the list of models;


•  Click Resurrect button;


•  Wait till software signals a successful operation completion;


•  Disconnect power supply, de-solder JTAG wires;

Now
phone is in bootable condition, that is, even if it does not start up
normally, you can flash it using known flashing methods

To enter emergency mode:

•  Disconnect PC cable;


•  Insert battery;


•  Hold both ‘Volume down’ and ‘Camera’ keys and press ‘Power ON’ button.

.

Read More