Easy repair Samsung GT-i8190N Galaxy S III Mini NFC supported

Repairing bricked Samsung I8190N is easy with the RIFF Box.

Please note, USB cable must be either disconnected or connected to PC.
Charger is not allowed. In order to establish connection, insert battery
and press Power On.
Problem to establish JTAG connection means the
device is dead up to the loader which enables JTAG. In this case phone
must be detected via USB cable as “U8500 USB ROM”. Please install
drivers which are located in JTAG Manager “Drivers\NTU8500” folder,
leave USB cable connected and start resurrection again.

To resurrect Samsung I8190N:

•  Solder JTAG cable to Samsung I8190N JTAG pads;


•  Attach battery and connect USB cable;


•  Make sure Samsung I8190N is selected in the list of models;


•  Click Resurrect button;


•  If required, press Power On key;


•  Wait till software signals a successful operation completion;


•  Disconnect power supply, de-solder JTAG wires;

Now
phone is in bootable condition, that is, even if it does not start up
normally, you can flash it using known flashing methods.

To enter download mode:

•  Disconnect PC cable;


•  Insert battery;


•  Hold ‘Volume Down’ and ‘Home’ keys and press Power-On.

.

Read More

Easy repair Samsung B5512 Galaxy Y Pro Duos supported

Repairing
bricked Samsung B5512 is easy with the RIFF Box. To power the phone
connect USB cable and insert battery. Sometimes it’s needed to press
Power On key.
In case phone is not detected de-power phone completely, then wait few seconds, insert USB cable and then insert battery.

To resurrect Samsung B5512:

•  Solder JTAG cable to Samsung B5512 JTAG pads;


•  Connect USB cable to phone and PC;


•  Insert battery;


•  Make sure Samsung B5512 is selected in the list of models;


•  Click Resurrect button;


•  Wait till software signals a successful operation completion;


•  Disconnect USB cable, de-solder JTAG wires;

Now
phone is in bootable condition, that is, even if it does not start up
normally, you can flash it using original Samsung downloader software to
restore it to the working state.

To enter download mode:

•  Disconnect PC cable;


•  Insert battery;


•  Hold both ‘Volume Down’ and ‘Menu’ keys and press Power-On.


•  If nothing happens, try an alternative: hold both ‘Volume Up’ and ‘Menu’ keys and press Power-On.

.

Read More

Easy repair Samsung GT-i9192 Galaxy S4 Mini Duos (Samsung Serrano) supported

Repairing bricked Samsung I9192 is easy with the RIFF Box.

Note, one simple way to connect over JTAG – connect USB cable to PC and
insert battery. In this case phone is automatically powered on, so no
need to press any power-on buttons on the phone keypad.

To resurrect Samsung I9192:

•  Solder JTAG cable to Samsung I9192 JTAG pads;


•  Insert USB Data cable into board and PC;


•  Make sure Samsung I9192 is selected in the list of models;


•  Click Resurrect button;


•  Wait till software signals a successful operation completion;


•  Disconnect power supply, de-solder JTAG wires;

Now
phone is in bootable condition, that is, even if it does not start up
normally, you can flash it using known flashing methods.

To enter download mode:

•  Disconnect PC cable;


•  Insert battery;


•  Hold ‘Volume Down’ and ‘Home’ keys and press Power-On.

.

Read More

Easy repair Samsung GT-i8262 Galaxy Core Duos supported

Repairing bricked Samsung I8262 is easy with the RIFF Box.

To resurrect Samsung I8262:

•  Solder JTAG cable to Samsung I8262 JTAG pads;


•  Connect Samsung I8262 tablet’s charger for power;


•  Make sure Samsung I8262 is selected in the list of models;


•  Click Resurrect button;


•  Wait till software signals a successful operation completion;


•  De-solder JTAG wires;

Now
device is in bootable condition, that is, even if it does not start up
normally, you can flash it using known flashing methods.
.

Read More

Easy repair Samsung SCH-i510 Droid Charge 4G LTE (Samsung Stealth) supported

Samsung
I510 is based on the S5PCxxx Processor (ARM core is Cortex-A8). Please
note the adaptive clocking mode (RTCK) is not available on this
processor, so make sure to select a fixed TCK frequency.
To establish the JTAG connection attach battery cable and press Power On key.

In case after resurrection the download mode is not initiated (LCD
remains blank) do repeat resurrection with ‘Clone Gremlin zone’ option
checked.

To resurrect Samsung I510:

•  Solder JTAG cable to Samsung I510 JTAG pads;


•  Attach battery cable and press Power On key;


•  Make sure Samsung I510 is selected in the list of models;


•  Make sure a fixed TCK frequency is selected;


•  Click Resurrect button;


•  Wait till software signals a successful operation completion;


•  Disconnect USB cable, de-solder JTAG wires;

Now
phone is in bootable condition, that is, even if it does not start up
normally, you can flash it using original Samsung downloader software to
restore it to the working state.

To enter download mode:

•  Disconnect PC cable;


•  Insert battery;


•  Hold both ‘Volume Down’ and ‘Home’ keys and press Power-On.

.

Read More

Easy repair Samsung GT-S6310 Galaxy Young supported

Repairing bricked Samsung S6310 is easy with the RIFF Box.

Note, one simple way to connect over JTAG – connect USB cable to PC and
insert battery. In this case phone is automatically powered on, so no
need to press any power-on buttons on the phone keypad.

To resurrect Samsung S6310:

•  Solder JTAG cable to Samsung S6310 JTAG pads;


•  Insert USB Data cable into board and PC;


•  Make sure Samsung S6310 is selected in the list of models;


•  Click Resurrect button;


•  Wait till software signals a successful operation completion;


•  Disconnect power supply, de-solder JTAG wires;

Now
phone is in bootable condition, that is, even if it does not start up
normally, you can flash it using known flashing methods.
.

Read More

Easy repair Samsung GT-i9505G Galaxy S4 LTE Google Play supported

Repairing bricked Samsung I9505G is easy with the RIFF Box.

Phone is auto powered on with USB Data Cable connected to the PC while
battery is inserted. Please note, battery must be charged. If battery is
not charged enough there is chance of getting 0×42 error during
connection stage.
There is some kind of anti-downgrade protection
implemented in this model. Thus You have to resurrect your phone with
the firmware version not lower than the one the phone had before being
killed. For this, during resurrection You can select firmware version to
be used as resurrection data.
In case there is even more newer
firmware available which is not yet included into current DLL, You can
always use eMMC Plugin to manually flash boot partitions into your
phone. For this, click plugin’s the ‘Load Layout from Device’ button and
then use ‘Inject Data from File…’ mouse left clicks to inject boot
files from firmware You have into the proper partitions (SBL1, SBL2,
SBL3, RPM, TZ and ABOOT) and then flash them back to phone.

To resurrect Samsung I9505G:

•  Solder JTAG cable to Samsung I9505G JTAG pads;


•  Connect USB cable or instert batteryu;


•  Make sure Samsung I9505G is selected in the list of models;


•  Click Resurrect button;


•  Wait till software signals a successful operation completion;


•  Disconnect power supply, de-solder JTAG wires;

Now
phone is in bootable condition, that is, even if it does not start up
normally, You can flash it using known flashing methods.
.

Read More