Easy repair Sony Xperia TX LT29 / Xperia T LT29i (Sony Hayabusa) supported

Repairing
bricked SE LT29i is easy with the RIFF Box. Phone is auto powered on
with USB Data Cable connected to the PC while battery is connected.

To resurrect SE LT29i:

•  Solder JTAG cable to SE LT29i JTAG pads;


•  Insert batter and connect USB Data cable;


•  Make sure SE LT29i is selected in the list of models;


•  If you use only battery, press Power On key;


•  Click Resurrect button;


•  Wait till software signals a successful operation completion;


•  Disconnect power supply, de-solder JTAG wires;

Now
phone is in bootable condition, that is, even if it does not start up
normally you can flash it using known flashing methods.
.

Read More

Easy repair Sony Xperia Miro ST23 / ST23i (Sony Mesona) supported

Repairing
bricked SE ST23i is easy with the RIFF Box. Phone is auto powered on
with USB Data Cable connected to the PC. Battery presence may be
required.
In case you have no USB cable near, make sure battery is
charged enough and hold Power On button during initiation of JTAG
connection.

To resurrect SE ST23i:

•  Solder JTAG cable to SE ST23i JTAG pads;


•  Insert USB Data cable into board and PC;


•  Make sure SE ST23i is selected in the list of models;


•  If you use battery, press Power On key;


•  Click Resurrect button;


•  Wait till software signals a successful operation completion;


•  Disconnect power supply, de-solder JTAG wires;

Now
phone is in bootable condition, that is, even if it does not start up
normally, you can flash it using known flashing methods.
.

Read More

Easy repair LG E980 Optimus G Pro 5.5 4G LTE supported

Repairing
bricked LG E980 with the RIFF Box requires non-beginner soldering
skills (since JTAG pads on board are very small and are close to each
other).
Phone is auto powered on with USB Data Cable connected to
the PC while battery is inserted. Please note, battery must be charged.
If battery is not charged enough there is chance of getting 0×42 error
during connection stage.

To resurrect LG E980:

•  Solder JTAG cable to LG E980 JTAG pads;


•  Insert USB Data cable into board and PC;


•  Make sure LG E980 is selected in the list of models;


•  Click Resurrect button;


•  Wait till software signals a successful operation completion;


•  Disconnect power supply, de-solder JTAG wires;

Now
phone is in bootable condition, that is, even if it does not start up
normally, you can flash it using known flashing methods

To enter emergency mode:

•  Disconnect PC cable;


•  Insert battery;


•  Hold both ‘Volume down’ and ‘Camera’ keys and press ‘Power ON’ button.

.

Read More

Easy repair Sony Xperia S LT26 / LT26i / Arc HD (Sony Nozomi) supported

Repairing bricked SE LT26i is easy with the RIFF Box. Phone is auto powered on with USB Data Cable connected to the PC. Battery presence may be required.

In case you have no USB cable near, make sure battery is charged enough
and hold Power On button during initiation of JTAG connection.

To resurrect SE LT26i:

•  Solder JTAG cable to SE LT26i JTAG pads;


•  Insert USB Data cable into board and PC;


•  Make sure SE LT26i is selected in the list of models;


•  If you use battery, press Power On key;


•  Click Resurrect button;


•  Wait till software signals a successful operation completion;


•  Disconnect power supply, de-solder JTAG wires;

Now
phone is in bootable condition, that is, even if it does not start up
normally, you can flash it using known flashing methods.
.

Read More

Easy repair Huawei Ascend G525-U00 supported

Repairing bricked Huawei G525 is easy with the RIFF Box.

To resurrect Huawei G525:

•  Solder JTAG cable to Huawei G525 JTAG pads;


•  Connect Huawei G525 tablet’s charger for power;


•  Make sure Huawei G525 is selected in the list of models;


•  Click Resurrect button;


•  Wait till software signals a successful operation completion;


•  De-solder JTAG wires;

Now
device is in bootable condition, that is, even if it does not start up
normally, you can flash it using known flashing methods.
.

Read More

Easy repair HTC One mini LTE 601n (HTC M4) supported Repairing bricked HTC OneMini (PO5820000) is easy with the RIFF Box.

 Phone is auto powered on with USB Data Cable connected to the PC. Battery presence may be required.

In case you have no USB cable near, make sure battery is charged enough
and hold Power On button during initiation of JTAG connection.

Resurrector will reflash radio’s boot zone and will re-write PDA’s SPL
to 2.19.0000 version. Additionally to SPL and Radio zones, the zone
which contains Model ID is re-flashed too. Thus after resurrection phone
will have Model ID = ‘PO5820000’.

To resurrect HTC OneS:

•  Solder JTAG cable to HTC OneMini (PO5820000) JTAG pads;


•  Insert USB Data cable into board and PC;


•  Make sure HTC OneMini (PO5820000) is selected in the list of models;


•  If you use battery, press Power On key;


•  Click Resurrect button;


•  Wait till software signals a successful operation completion;


•  Disconnect power supply, de-solder JTAG wires;

Now
phone is in bootable condition, that is, even if it does not start up
normally, you can flash it using known flashing methods.

To enter download mode:

•  Disconnect PC cable;


•  Insert battery;


•  Hold ‘Volume Down’ key and press ‘Power ON’ button.

.

Read More

Easy repair Lenovo/Acer Gobi 2000 modem card supported Resurrecting Qualcomm ThinkPad GOVI2000 is simple.

Current resurrector contains Firmware and EEPROM zones for memory chip with ID 0×0020/0×8829.

To resurrect Qualcomm ThinkPad GOVI2000:

•  Solder JTAG cable to Qualcomm ThinkPad GOBI2000 JTAG pads;


•  Insert USB Data cable into board and PC;


•  Make sure Qualcomm ThinkPad GOVI2000 is selected in the list of models;


•  Click Resurrect button;


•  Choose which areas to flash;


•  Wait till software signals a successful operation completion;


•  De-solder JTAG wires;

You can select Acer or Lenovo firmware version.

..

Read More