Iphone 5s copy MT6571 Read flash file Done V2.9.2 big thanks Team

Connecting...
CPU TYPE:MT6571
Hardware version:CA00
Software version:0000
SecCfgVal :0x00000000
BromVersion :0xFF
BLVersion :0x01
Boot downloading complete!
FlashID:009800BC00900066
Flash Type: NAND_TYBC0A111236KC10
FlashLen:20000000

Analysis of USB port...
Flash reading...

Analysis of USB port,Please insert phone USB cable.
Connecting...
CPU TYPE:MT6571
Hardware version:CA00
Software version:0000
Boot downloading complete!
FlashID:009800BC00900066
Flash Type: NAND_TYBC0A111236KC10
FlashLen:20000000

>>Flash reading...61%



\

Read More

Latest Version Sigma Software v.2.10.01 released! Download Now

Sigma Software v.2.10.01 released!



PACK 2 Update:

The following unique solutions have been released for Motorola Qcom Hexagon smartphones:

1. Full support for MotoX smartphones, including devices with Android 4.4.4.


♦ Servicing of MotoX with Android 4.4.4 requires rooting

(unlike devices with lower Android versions).


♦ Here you’ll find out which versions of Android can be serviced without rooting

2. Unlock Motorola bootloader


This procedure can be performed in the following Motorola devices:
Motorola Atrix 3 HD, Atrix HD LTE, DROID MINI, DROID RAZR M 4G LTE, DROID ULTRA,

DROID ULTRA MAXX, MB886, Moto X, Photon Q 4G LTE, RAZR HD, RAZR M,

RAZR MAXX HD, Softbank 201M, XT1030, XT1052, XT1053, XT1055, XT1056, XT1058,

XT1060, XT1080, XT1080M, XT897, XT902, XT905, XT907, XT925, XT926.


♦ Important: this one-click solution works with devices running on

Android version lower than 4.4.4


♦ The operation is irreversible, and therefore the bootloader will

remain unlocked forever.


♦ Devices with non-unlockable bootloader (not supported by the phone

manufacturer’s Bootloader Unlock program) now can have their

boot unlocked: the solution grants access to rooting,

servicing, installing custom firmware and other operations.


Find full manual on the official website

3. We have reorganized and simplified Direct unlock /

Read unlock codes / Repair IMEI procedures for
XT907/925/926 with Android 4.4.2. Just root the phone,

and it's ready to be serviced.

4. We have examined and fixed customer-reported issues

regarding unlocking MotoX-series.

5. We have added the possibility to root your device

via CWM or TWRP. In order to root the smartphone,

boot it into the recovery mode and root it using “Autodetect” method



Download Sigma Software v2.10.01

Read More

PLUM X210 ReaD InFo & ReaD PaTTerN ((EasY, No LOSS InFo)) InFo...

PLUM X210


ReaD InFo & ReaD PaTTerN ((EasY, No LOSS InFo))

InFo...

Code:

Wait for phone...
Phone found! [ 15 ]
Sync...
Inital regs read done
Boot Info : 
BB_CPU_ID : 6572
BB_CPU_HW : CA01
BB_CPU_SW : 8C00
BB_CPU_SB : 0000
BB_CPU_NM : [MediaTek] MT6572_S00
Processing BROM stage
BLVersion : 0x01
SecCfgVal : 0x00000000
BromVersion : 0xFF
BLVersion : 0x01
Preloader Status : Alive
Processing DA stage
DA Select done , sending 
NAND_ID : 002C00BC009000660054000000000000
eMMC_ID : 00000000000000000000000000000000
DA Stat : v4.2 on BBID : 0x88
DA Sent. Configure setting now ... 
DA started successuflly
NAND FlashIC initialized
[NAND] : FLASH_VEN : 0x007F , [Micron] NAND_MT29C4G48MAAHBAAKS_5WT
[NAND] : FLASH_DIE : 002C 00BC 0090 0066 0054 0000 0000
[NAND] : FLASH_LEN : 0x20000000
INT RAM    : 0x00020000
EXT RAM    : 0x10000000
BOOT TYPE  : NAND_FLASH_BOOT
SOC VERIFY : C1
Boot Ok!

NAND : Detecting structure now... Please, wait.
NAND : Structure detect done [31]

[AP] : Initial info read Ok!

Done!
Elapsed: 00:00:58

PaTTeRn....

Code:

BOOT TYPE  : NAND_FLASH_BOOT
SOC VERIFY : C1
Boot Ok!

Reading data ... 
Reading data ...  Please, wait
Checking ... 

Get PatternLock ...
PatternLock Sequnce : 753214

Done!
Elapsed: 00:01:37

BUT..... No ReaD FSF or .IspFF

TrY DeFaUlT...

Code:

Operation : Read Flash [ v1.15 ]

1. Power Off Phone , Remove battery , Insert back
2. Insert USB cable. In some cases require hold BootKey

Wait for phone...
Phone found! [ 15 ]
Sync...
Inital regs read done
Boot Info : 
BB_CPU_ID : 6572
BB_CPU_HW : CA01
BB_CPU_SW : 8C00
BB_CPU_SB : 0000
BB_CPU_NM : [MediaTek] MT6572_S00
Processing BROM stage
BLVersion : 0x01
SecCfgVal : 0x00000000
BromVersion : 0xFF
BLVersion : 0x01
Preloader Status : Alive
Processing DA stage
DA Select done , sending 
NAND_ID : 002C00BC009000660054000000000000
eMMC_ID : 00000000000000000000000000000000
DA Stat : v4.2 on BBID : 0x88
DA Sent. Configure setting now ... 
DA started successuflly
NAND FlashIC initialized
[NAND] : FLASH_VEN : 0x007F , [Micron] NAND_MT29C4G48MAAHBAAKS_5WT
[NAND] : FLASH_DIE : 002C 00BC 0090 0066 0054 0000 0000
[NAND] : FLASH_LEN : 0x20000000
INT RAM    : 0x00020000
EXT RAM    : 0x10000000
BOOT TYPE  : NAND_FLASH_BOOT
SOC VERIFY : C1
Boot Ok!

Reading Flash Conent now ... 
Not supported FlashType for this operation yet :(

Done!
Elapsed: 00:00:14

TrY P1....

Code:

Operation : Read Flash [ v1.15 ]

1. Power Off Phone , Remove battery , Insert back
2. Insert USB cable. In some cases require hold BootKey

Wait for phone...
Phone found! [ 15 ]
Sync...
Inital regs read done
Boot Info : 
BB_CPU_ID : 6572
BB_CPU_HW : CA01
BB_CPU_SW : 8C00
BB_CPU_SB : 0000
BB_CPU_NM : [MediaTek] MT6572_S00
Processing BROM stage
BLVersion : 0x01
SecCfgVal : 0x00000000
BromVersion : 0xFF
BLVersion : 0x01
Preloader Status : Alive
Processing DA stage
DA Select done , sending 
NAND_ID : 002C00BC009000660054000000000000
eMMC_ID : 00000000000000000000000000000000
DA Stat : v4.2 on BBID : 0x88
DA Sent. Configure setting now ... 
DA started successuflly
NAND FlashIC initialized
[NAND] : FLASH_VEN : 0x007F , [Micron] NAND_MT29C4G48MAAHBAAKS_5WT
[NAND] : FLASH_DIE : 002C 00BC 0090 0066 0054 0000 0000
[NAND] : FLASH_LEN : 0x20000000
INT RAM    : 0x00020000
EXT RAM    : 0x10000000
BOOT TYPE  : NAND_FLASH_BOOT
SOC VERIFY : C1
Boot Ok!

Reading Flash Conent now ... 
NAND settings not exists, will check now ... 
Settings read Ok!
 - > Re-connect battery and start operation again!

TrY P2....

Code:

Operation : Read Flash [ v1.15 ]

1. Power Off Phone , Remove battery , Insert back
2. Insert USB cable. In some cases require hold BootKey

Wait for phone...
Phone found! [ 15 ]
Sync...
Inital regs read done
Boot Info : 
BB_CPU_ID : 6572
BB_CPU_HW : CA01
BB_CPU_SW : 8C00
BB_CPU_SB : 0000
BB_CPU_NM : [MediaTek] MT6572_S00
Processing BROM stage
BLVersion : 0x01
SecCfgVal : 0x00000000
BromVersion : 0xFF
BLVersion : 0x01
Preloader Status : Alive
Processing DA stage
DA Select done , sending 
NAND_ID : 002C00BC009000660054000000000000
eMMC_ID : 00000000000000000000000000000000
DA Stat : v4.2 on BBID : 0x88
DA Sent. Configure setting now ... 
DA started successuflly
NAND FlashIC initialized
[NAND] : FLASH_VEN : 0x007F , [Micron] NAND_MT29C4G48MAAHBAAKS_5WT
[NAND] : FLASH_DIE : 002C 00BC 0090 0066 0054 0000 0000
[NAND] : FLASH_LEN : 0x20000000
INT RAM    : 0x00020000
EXT RAM    : 0x10000000
BOOT TYPE  : NAND_FLASH_BOOT
SOC VERIFY : C1
Boot Ok!

Reading Flash Conent now ... 

Read error :(

Operation Failed
Elapsed: 00:00:12
Reconnect Power/Cable!

TrY P3....

Code:

Operation : Read Flash [ v1.15 ]

1. Power Off Phone , Remove battery , Insert back
2. Insert USB cable. In some cases require hold BootKey

Wait for phone...
Phone found! [ 15 ]
Sync...
Inital regs read done
Boot Info : 
BB_CPU_ID : 6572
BB_CPU_HW : CA01
BB_CPU_SW : 8C00
BB_CPU_SB : 0000
BB_CPU_NM : [MediaTek] MT6572_S00
Processing BROM stage
BLVersion : 0x01
SecCfgVal : 0x00000000
BromVersion : 0xFF
BLVersion : 0x01
Preloader Status : Alive
Processing DA stage
DA Select done , sending 
NAND_ID : 002C00BC009000660054000000000000
eMMC_ID : 00000000000000000000000000000000
DA Stat : v4.2 on BBID : 0x88
DA Sent. Configure setting now ... 
DA started successuflly
NAND FlashIC initialized
[NAND] : FLASH_VEN : 0x007F , [Micron] NAND_MT29C4G48MAAHBAAKS_5WT
[NAND] : FLASH_DIE : 002C 00BC 0090 0066 0054 0000 0000
[NAND] : FLASH_LEN : 0x20000000
INT RAM    : 0x00020000
EXT RAM    : 0x10000000
BOOT TYPE  : NAND_FLASH_BOOT
SOC VERIFY : C1
Boot Ok!

Reading Flash Conent now ... 
NAND settings not exists, will check now ... 
Settings read Ok!
 - > Re-connect battery and start operation again!

WaiT?????

Need OlD VeRsiOn of CM2....???

NeeD MoRe TesT??? Or wait for New UpDaTe...????


>>MaO<<

Read More

ASUS Flash Tool Ver1.0.0.7 Release Download Now

ASUS Flash Tool Ver1.0.0.7 Release !!!

Example - How to Select Model

• A400CG its Zenfone 4


• A500CG Its Zenfone 5


• A600CG Its Zenfone 6

Supported Model List Below :




Download Link : AsusFlashToolInstaller_1.0.0.7.rar

Br

AzimBahar/ParvezAhmed

Read More

Avatorbox/Dongle Update ver 7.901 Add Exclusive Hot Update SPD6825/8825

Avatorbox/Dongle Update ver 7.901 Add Exclusive Hot Update SPD6825/8825


What New ?
World First Supported Added SPD 6825/8825


SPD6825 - Read Info - World First
SPD6825 - Read Flash - World First
SPD6825 - Write Flash - World First
SPD6825 - Imei Repair - World First
SPD6825 - Direct Patten Unlock [Exclusive Update][Without usb Debug/Without root/ without Data loose] - World First
SPD6825 - Direct Password unlock [Exclusive Update][Without usb Debug/Without root/ without Data loose] - World First


SPD8825 - Read Info - World First
SPD8825 - Read Flash - World First
SPD8825 - Write Flash - World First
SPD8825 - Imei Repair - World First
SPD8825 - Direct Patten Unlock [Exclusive Update][Without usb Debug/Without root/ without Data loose] - World First
SPD8825 - Direct Password unlock [Exclusive Update][Without usb Debug/Without root/ without Data loose] - World First


Download Here : Avatorbox_Ver7.901.rar



Q : How to Connect Phones

A : Just simple usb Cable , Always Select USB > Untick pinfind > Press Start


Q : How to Select Boot I cannot Find SPD6825/8825

A : Select Boot Nand > Select Boot 6825/8825


Q : How to do Direct Patten Unlock

A : Select Unlock > Do Setting For CPU > Press Start > Wait 2-3 Minutes > Any Enter key unlock pattern

Same Way for password lock


Q : I am try to connect always SPD Usb serial not found

A : Install Latest drivers and Always USB Good Usb cable And use Boot key For Boot phone


Q : How to Repair Imei

A : Just Select Imei Repair > Select Boot Type Nand > Select Boot 6825/8825 > Select USB > Press Start


Q : What is CPU Settings

A : Select Boot Type Nand > Select Boot > 6825/8825 > Select USB > untick Pinfind


Q : Why Read Flash / Write Flash slow

A : SPD CPU Speed Very slow for Read / Write Cant Be fast at the moment 45 Minutes Required do this operations


More updates very soon



I dont have Avatorbox / Dongle Where can i buy ?

Free Shipping for limited time only

Read More

G Five G6 Hang On GFive Logo Write Factory Firmware With In 4 Mint and Problem Will Be Solved

G Five G6 Hang On GFive Logo

Write Factory Firmware With In 4 Mint and Problem Will Be Solved

Code:

  Set MediaTek PreLoader USB VCOM Port (COM16)
  Please Hold "ON" to connect with the phone...
  Connected to Phone.
  CPU: MT6582 SW:0001 Ver: CA01
  Downloading Boot8 ...
  EMMC Size: 0xEC000000
  Flash Type: EMMC
  INT/EXT RAM  Size: 0x0+0x0
  Writing(Nand/eMMC)...
  Writing MBR
  Writing EBR1
  Writing UBOOT
  Writing BOOTIMG
  Writing RECOVERY
  Writing SEC_RO
  Writing LOGO
  Writing EBR2
  Writing ANDROID
  Writing CACHE
  Writing USRDATA
  Writing FAT
  Checking Sum...
  Write Done.
>>Total time: 4 mins 5 s

Regard

FullFlashPak

Read More

Samsung Tool 19.1 Released. Small update released Download Now

Samsung Tool 19.1 Released


Added:

- support GT-I9060M (flashing, Unlock, Imei repair, Network repair, READ/WRITE cert)

- support SM-J100ML (flashing, Unlock, Imei repair, Network repair, READ/WRITE cert)

- support SM-A7000 (flashing, Read/Write QNC, Wipe EFS, Write CERT, auto backup to tar)

- support SM-A7009 (flashing, Read/Write QNC, Wipe EFS, Write CERT, auto backup to tar)

- support SM-A700FD (flashing, Read/Write QNC, Wipe EFS, Write CERT, auto backup to tar)

- support SM-A700H (flashing, Read/Write QNC, Wipe EFS, Write CERT, auto backup to tar)

- support SM-G7200 (flashing, Read/Write QNC, Wipe EFS, Write CERT, auto backup to tar)

- support GT-I9301Q (flashing, Read/Write QNC, Wipe EFS, Write CERT, auto backup to tar)

- support SM-T707A (flashing, Read/Write EFS, Read/Write CERT, Direct unlock)

- support SM-T807T (flashing, Read/Write EFS, Read/Write CERT, Direct unlock)




DONT ASK ANY LINKS. ALL DOWNLOADS ONLY FROM OFFICIAL SITE: http://z3x-team.com/support_files/ - > downloads area.

Read More