Volcano,USB SPD 6531D/6531C/6610/Repairing is So Easy That I Wish All Faulty Mobile

Repairing SC6531C/SC6531D/SC6531DA/6610/20 With Volcano is So Easy That I Wish All Incoming Faulty Mobiles Were SC6531



Smobile S8 SPD 6531


SAMSUNG DUOS G’FEN SPD 6610/20

OPSSON U80 Music SPD 6531A ??


USB Repairing SC6531/ SC6531Da/ SC6531D/6610/20 With Volcano is So Easy



SAMSUNG DUOS G’FEN B7722


Info-1





Read File Info-2

Read More

View Post VolcanoBox v2.9.9 Full installer

VolcanoBox v2.9.9 Full installer

DOWNLOAD LINK ----> https://mega.co.nz/#!bU5FjLoL!YxTGyk...5wGFALpYW_m3ic

ONE REQUEST TO VOLCANO MODERATORS / SUPPORTERS PLZ ADD THIS LINK TO SUPPORT AREA TO HELP VOLCANO USERS.

IF U LIKE THIS JUST PRESS THANKS BUTTON.

Read More

World 1st Lava Iris 404 Flair Tool Dl Image Fail Done By Grate Cm2

Here Is All Process,How To Solve, Tool Dl Image Fail By Grate Cm2


Take Read Info

Then Simpley Fix Dl Mode , You'v Done



Read Info

Code:

Operation : Check / Read Info [ v1.15 ]

1. Power Off Phone , Remove battery , Insert back
2. Insert USB cable. In some cases require hold BootKey

Wait for phone...
Phone found! [ 5 ]
Sync...
Inital regs read done
Boot Info : 
BB_CPU_ID : 6571
BB_CPU_HW : CA00
BB_CPU_SW : 8D00
BB_CPU_SB : 0000
BB_CPU_NM : [MediaTek] MT6571_S00
Processing BROM stage
BLVersion : 0x01
SecCfgVal : 0x00000000
BromVersion : 0xFF
BLVersion : 0x01
Preloader Status : Alive
Processing DA stage
DA Select done , sending 
NAND_ID : 00000000000000000000000000000000
eMMC_ID : 1501004E35585A4D4201D624C8367183
DA Stat : v4.2 on BBID : 0x8B
DA Sent. Configure setting now ... 
DA started successuflly
eMMC FlashIC initialized
[eMMC] : FLASH_VEN : 0015 , OEM : 0100
[eMMC] : FLASH_INF : BMZX5
[eMMC] : FLASH_CID : 1501004E35585A4D4201D624C8367183
[eMMC] : FLASH_LEN : 0x00000000E9000000
INT RAM    : 0x00020000
EXT RAM    : 0x20000000
BOOT TYPE  : EMMC_FLASH_BOOT
SOC VERIFY : C1
Boot Ok!

[AP] : Initial info read Ok!

Brand     : iris
ProdName  : 404F
ProdModel : iris 404Flair
Device    : iris 404Flair
AndroidVer: 4.4.2
MTKxCPU   : MT6571
MTKxPRJ   : ALPS.KK1.MP7.V1

Done!
Elapsed: 00:00:07
Reconnect Power/Cable!

Fix DL Mode

Code:

 1. Power Off Phone , Remove battery , Insert back
2. Insert USB cable. In some cases require hold BootKey

Wait for phone...
Phone found! [ 5 ]
Sync...
Inital regs read done
Boot Info : 
BB_CPU_ID : 6571
BB_CPU_HW : CA00
BB_CPU_SW : 8D00
BB_CPU_SB : 0000
BB_CPU_NM : [MediaTek] MT6571_S00
Processing BROM stage
BLVersion : 0x01
SecCfgVal : 0x00000000
BromVersion : 0xFF
BLVersion : 0x01
Preloader Status : Alive
Processing DA stage
DA Select done , sending 
NAND_ID : 00000000000000000000000000000000
eMMC_ID : 1501004E35585A4D4201D624C8367183
DA Stat : v4.2 on BBID : 0x8B
DA Sent. Configure setting now ... 
DA started successuflly
eMMC FlashIC initialized
[eMMC] : FLASH_VEN : 0015 , OEM : 0100
[eMMC] : FLASH_INF : BMZX5
[eMMC] : FLASH_CID : 1501004E35585A4D4201D624C8367183
[eMMC] : FLASH_LEN : 0x00000000E9000000
INT RAM    : 0x00020000
EXT RAM    : 0x20000000
BOOT TYPE  : EMMC_FLASH_BOOT
SOC VERIFY : C1
Boot Ok!


Done!
Elapsed: 00:00:12
Reconnect Power/Cable!

Before





After

Read More

Samsung mini s2 gmail lock cleared without losing data / Avatorbox spd king coming with more surprise

Samsung mini s2 gmail lock cleared without losing data / Avatorbox spd king coming with more surprise











SOME THING VERY HOT AND NEW

IS ADDED / KEEP INTOUCH WITH US

FOR BIG SURPRISE /

SOME THING VERY SPECIAL FOR MTK SMART PHONES

Read More

Ltest Version SigmaKey Software v2.10.03 released Download

SigmaKey Software v2.10.03 released!
1. We've added SPC code reading feature for Qualcomm Hexagon-based Motorola devices.

The code is displayed in a log.
2. We have reorganized and enhanced operating procedures for ZTE Kis III.
3. The following models have been added to the list of supported devices for servicing with Yoda method:
♦ Zte Blade L3 Plus (MT6582)
♦ Zte Blade L3 (MT6582)
♦ Cat B15Q (MT6582)
More info and discussion are HERE.
Download Sigma Software v2.10.03
Best Regards
GSMServer team

Read More

BlackBerry OS 10.x.x.x official autoloader for Z10 / z30

Installation Tutorial


* Switch off your BlackBerry 10 device

* Run the AutoLoader File

* Connect your BlackBerry 10 Device to your PC via USB

* Quickly Turn on your BlackBerry 10 device

* The AutoLoader will detect your device and starts the installation

* Please hold till the AutoLoader reaches to 100% and CLOSES automatically

* Disconnect your BlackBerry 10 device and wait till it starts again


Downloads


BlackBerry OS 10.1.0.1845 official autoloader


STL100-1:


STL100-2:


STL100-3:


STL100-4:




Latest updated versions


Z10 models 100-1, -2, -3, -4: Download the 10.1.0.4537 OS


Z10 models 100-1: Download the 10.1.0.4633 OS


Z10 models 100-2, -3, -4: Download the 10.1.0.4633 OS


Z10 models 100-2, -3, -4: Download the 10.1.0.4687 OS


Software version 10.2.1.2102


Z10 model STL100-1: Download


Z10 models STL100-2, -3, -4: Download


Z10 OS 10.2.1.2234 latest updated


Z10 (STL100-1)



Z10 (STL100-2, 3, and 4)


BlackBerry Z30 Latest


Download Z30-10.2.1.2234+2235Radio Download

Read More

Octoplus JTAG Software v.1.8.6 - we have no rest!

Octoplus JTAG Software v.1.8.6 is out!


We have added Boot Repair via JTAG for LG Optimus LTE II F160LV, LG F160K, LG F160S

and via USB and small TP for LG F70 F370K, LG F370L, F370S.


Octoplus Box JTAG Software v.1.8.6 Release Notes

• Added support for the following models:

- LG F160LV - added Dead Boot/Device Repair via JTAG

- LG F160K - added Dead Boot Repair via JTAG

- LG F160S - added Dead Boot Repair via JTAG

- LG F370K - added Dead Boot Repair via USB

- LG F370L - added Dead Boot Repair via USB

- LG F370S - added Dead Boot Repair via USB

• All pinouts and Repair procedures are described in the manual ("Help" button in Software)

To repair mentioned above devices via USB, please follow the next three steps:

1. Attach testpoint as shown
   on Figure 1 in the Software manual and connect your phone using Micro
   USB cable directly into the mainboard’s USB port
   
   (do NOT use any USB hubs!)


2. Check PC Device Manager, a new device should appear "Qualcomm
   HS-USB QDLoader 9008" or "Unknown Device" if you hadn’t installed the
   driver yet.
   
   Drivers are in {Installation_Folder}\Driver\QHSUSB


3. Release testpoint and press “EasyRepair” button in the software (or “Connect” button, when in Advanced Mode)

Download Octoplus Box JTAG Software v.1.8.6

Find out more at: www.octoplusbox.com

Read More