Winmax w90 dead full shot solution

Winmax w90 dead full shot solution

Read More

Idea Fab 3G i4901 "Secure Boot" or "BootLoader Locked" phone

Dear Friends,


It's Idea i4901.


Operation : Check / Read Info [ v1.21 ]

Code:

1. Power Off Phone , Remove battery , Insert back
2. Insert USB cable. In some cases require hold BootKey

Wait for phone...
Phone found! [ 170 ]
Sync...
Inital regs read done
Boot Info : 
BB_CPU_ID : 6572
BB_CPU_HW : CA01
BB_CPU_SW : 8A00
BB_CPU_SB : 0000
BB_CPU_NM : [MediaTek] MT6572_S00
Processing BROM stage
BLVersion : 0x01
SecCfgVal : 0x00000000
BromVersion : 0xFF
BLVersion : 0x01
Preloader Status : Alive
Processing DA stage
DA Select done , sending 

Error : DA init Failed! Error code : 0x3
Probably - "Secure Boot" or "BootLoader Locked" phone

Boot Error!

Operation Failed
Elapsed: 00:00:12
Reconnect Power/Cable!

Operation : Check / Read Info [ v1.21 ]

Code:

1. Power Off Phone , Remove battery , Insert back
2. Insert USB cable. In some cases require hold BootKey

Wait for phone...
Phone found! [ 9 ]
Sync...
Inital regs read done
Boot Info : 
BB_CPU_ID : 6572
BB_CPU_HW : CA01
BB_CPU_SW : 8A00
BB_CPU_SB : 0000
BB_CPU_NM : [MediaTek] MT6572_S00
Processing BROM stage
BLVersion : 0xFE
SecCfgVal : 0x00000000
BromVersion : 0x05
BLVersion : 0xFE
Preloader Status : Not active (Erased)
Processing DA stage
DA Select done , sending 
NAND_ID : 00000000000000000000000000000000
eMMC_ID : 7001004D4D43303447580DAA7463D0F7
DA Stat : v4.2 on BBID : 0x88
DRAM not initialized , configure DRAM Settings
DRAM EmiReq Ok , 0x00A8
DRAM Init Ok , 0x20000000
DA Sent. Configure setting now ... 
DA started successuflly
eMMC FlashIC initialized
[eMMC] : FLASH_VEN : 0070 , OEM : 0100
[eMMC] : FLASH_INF : G40CM
[eMMC] : FLASH_CID : 7001004D4D43303447580DAA7463D0F7
[eMMC] : FLASH_LEN : 0x00000000E6800000
INT RAM    : 0x00020000
EXT RAM    : 0x20000000
BOOT TYPE  : EMMC_FLASH_BOOT
SOC VERIFY : C1
Boot Ok!

[AP] : Initial info read Ok!

Brand     : compal
ProdName  : i4901
ProdModel : i4901
Device    : i4901
AndroidVer: 4.2.2
MTKxCPU   : MT6572
MTKxPRJ   : ALPS.JB3.MP.V1.17

Done!
Elapsed: 00:00:06
Reconnect Power/Cable!

Operation : Read Flash [ v1.21 ]

Code:

1. Power Off Phone , Remove battery , Insert back
2. Insert USB cable. In some cases require hold BootKey

Wait for phone...
Phone found! [ 9 ]
Sync...
Inital regs read done
Boot Info : 
BB_CPU_ID : 6572
BB_CPU_HW : CA01
BB_CPU_SW : 8A00
BB_CPU_SB : 0000
BB_CPU_NM : [MediaTek] MT6572_S00
Processing BROM stage
BLVersion : 0xFE
SecCfgVal : 0x00000000
BromVersion : 0x05
BLVersion : 0xFE
Preloader Status : Not active (Erased)
Processing DA stage
DA Select done , sending 
NAND_ID : 00000000000000000000000000000000
eMMC_ID : 7001004D4D43303447580DAA7463D0F7
DA Stat : v4.2 on BBID : 0x88
DRAM not initialized , configure DRAM Settings
DRAM EmiReq Ok , 0x00A8
DRAM Init Ok , 0x20000000
DA Sent. Configure setting now ... 
DA started successuflly
eMMC FlashIC initialized
[eMMC] : FLASH_VEN : 0070 , OEM : 0100
[eMMC] : FLASH_INF : G40CM

Read More

Octoplus/Octopus Box Samsung v.1.9.7 - A3, A5, A7 flash and repair added!

Octoplus/Octopus Box Samsung Software v.1.9.7 is out!

We have added support for Samsung SM-A3000, SM-A300YZ, SM-A5000, SM-A500FD, SM-A500Y, SM-A500YZ, SM-A7009, SM-A700FZ!

Octoplus/Octopus Box Samsung Software v.1.9.7 Release Notes

• Added support for the following models:

- SM-A3000
- added Write Firmware, Write Cert (A/B), Wipe Security, Read/Write
QCN, Read/Write/Repair NVM, Read/Write Security, Read/Write EFS, Reboot
in Download/Recovery Mode, Read PIT.

- SM-A300YZ - added Write
Firmware, Write Cert, Wipe Security, Read/Write QCN, Read/Write/Repair
NVM, Read/Write Security, Read/Write EFS, Reboot in Download/Recovery
Mode, Read PIT.

- SM-A5000 - added Write
Firmware, Write Cert (A/B), Wipe Security, Read/Write QCN,
Read/Write/Repair NVM, Read/Write Security, Read/Write EFS, Reboot in
Download/Recovery Mode, Read PIT.

- SM-A500FD - added Write
Firmware, Write Cert (A/B), Wipe Security, Read/Write QCN,
Read/Write/Repair NVM, Read/Write Security, Read/Write EFS, Reboot in
Download/Recovery Mode, Read PIT.

- SM-A500Y - added Write
Firmware, Write Cert, Wipe Security, Read/Write QCN, Read/Write/Repair
NVM, Read/Write Security, Read/Write EFS, Reboot in Download/Recovery
Mode, Read PIT.

- SM-A500YZ - added Write
Firmware, Write Cert, Wipe Security, Read/Write QCN, Read/Write/Repair
NVM, Read/Write Security, Read/Write EFS, Reboot in Download/Recovery
Mode, Read PIT.

- SM-A7009 - added Write
Firmware, Write Cert (A/B), Wipe Security, Read/Write QCN,
Read/Write/Repair NVM, Read/Write Security, Read/Write EFS, Reboot in
Download/Recovery Mode, Read PIT.

- SM-A700FZ - added Write
Firmware, Write Cert (A/B), Wipe Security, Read/Write QCN,
Read/Write/Repair NVM, Read/Write Security, Read/Write EFS, Reboot in
Download/Recovery Mode, Read PIT.

- SM-G9200 - added Write Cert.

- SM-G920T - added Write Cert.

- SM-G920F - added Write Cert.

- SM-G920D - added Write Cert.

- SM-G9250, SM-G925A, SM-G925F, SM-G925K, SM-G925P, SM-G925S, SM-G925T, SM-G925W8 - improved Write Cert operation.

• As usual, we have uploaded new Certificates files into the Support Area!


• New QCN files were uploaded as well!


• All supported operations are described in details in Software manual ("Help" button in Software).

Download Octoplus/Octopus Box Samsung Software v.1.9.7

Find out more at: www.octoplusbox.com

Read More

World 1St Again QMobile A63 Nore Three Sim By FullFlashPak

Q Mobile A63 Three Sim Read Flashfile Done




Reading Logs.....

Quote:

Set MediaTek PreLoader USB VCOM Port (COM30) Please Hold "ON" to connect with the phone... Connected to Phone. CPU: MT6572 SW:0000 Ver: CA01 Downloading Boot8 ... EMMC Size: 0xE9000000 Flash Type: EMMC INT/EXT RAM Size: 0x0+0x0 Waiting for USB Port... Set MediaTek DA USB VCOM Port (COM52) File Mode: D:\QMOBILE ANDORID\A63 MT6572 3 SIM READ WORKING\MTK6572_1409241016.bin Reading(EMMC)...(0xA0000000) Saving as scatter file... OK. out: D:\QMOBILE ANDORID\A63 MT6572 3 SIM READ WORKING\MT6572_140924103807 Read OK. total: 22 mins46 s >>File save to:\QMOBILE ANDORID\A63 MT6572 3 SIM READ WORKING\MTK6572_1409241016.bin

Screen Shot

Read More

Octoplus/Octopus Box Samsung Software v.1.9.7 is out

Octoplus/Octopus Box Samsung Software v.1.9.7 is out!We have added support for Samsung SM-A3000, SM-A300YZ, SM-A5000, SM-A500FD, SM-A500Y, SM-A500YZ, SM-A7009, SM-A700FZ!

Octoplus/Octopus Box Samsung Software v.1.9.7 Release Notes

• Added support for the following models:

- SM-A3000
- added Write Firmware, Write Cert (A/B), Wipe Security, Read/Write
QCN, Read/Write/Repair NVM, Read/Write Security, Read/Write EFS, Reboot
in Download/Recovery Mode, Read PIT.

- SM-A300YZ - added Write
Firmware, Write Cert, Wipe Security, Read/Write QCN, Read/Write/Repair
NVM, Read/Write Security, Read/Write EFS, Reboot in Download/Recovery
Mode, Read PIT.

- SM-A5000 - added Write
Firmware, Write Cert (A/B), Wipe Security, Read/Write QCN,
Read/Write/Repair NVM, Read/Write Security, Read/Write EFS, Reboot in
Download/Recovery Mode, Read PIT.

- SM-A500FD - added Write
Firmware, Write Cert (A/B), Wipe Security, Read/Write QCN,
Read/Write/Repair NVM, Read/Write Security, Read/Write EFS, Reboot in
Download/Recovery Mode, Read PIT.

- SM-A500Y - added Write
Firmware, Write Cert, Wipe Security, Read/Write QCN, Read/Write/Repair
NVM, Read/Write Security, Read/Write EFS, Reboot in Download/Recovery
Mode, Read PIT.

- SM-A500YZ - added Write
Firmware, Write Cert, Wipe Security, Read/Write QCN, Read/Write/Repair
NVM, Read/Write Security, Read/Write EFS, Reboot in Download/Recovery
Mode, Read PIT.

- SM-A7009 - added Write
Firmware, Write Cert (A/B), Wipe Security, Read/Write QCN,
Read/Write/Repair NVM, Read/Write Security, Read/Write EFS, Reboot in
Download/Recovery Mode, Read PIT.

- SM-A700FZ - added Write
Firmware, Write Cert (A/B), Wipe Security, Read/Write QCN,
Read/Write/Repair NVM, Read/Write Security, Read/Write EFS, Reboot in
Download/Recovery Mode, Read PIT.

- SM-G9200 - added Write Cert.

- SM-G920T - added Write Cert.

- SM-G920F - added Write Cert.

- SM-G920D - added Write Cert.

- SM-G9250, SM-G925A, SM-G925F, SM-G925K, SM-G925P, SM-G925S, SM-G925T, SM-G925W8 - improved Write Cert operation.

• As usual, we have uploaded new Certificates files into the Support Area!


• New QCN files were uploaded as well!


• All supported operations are described in details in Software manual ("Help" button in Software).

Read More

Successfully unlock Docomo S5 SC-04F with z3x.

1st u have to flash with odin 3.07 with following file get from: sammmobile.com*-*This website is for sale!*-*sammmobile Resources and Information.


1) SC04FOMU1VNF9_SC04FDCM1VNF9_SC04FOMU1VNF9_HOME.tar .md5



after that its docomo firmware dont use docomo dialer for hidden codes
use only green color dialer and dail *#0808# and select dm+modem+adb


2)root your phone



3)backup ur qcn and efs


4)wipe ur set


5)write efs then write qcn


6)then write cert file select model G900F in z3x




ur phone have 100000000%%%% unlocked and use any netwok with 3g and gsm and LTE.


Waiting ADB device... OK

[ 6/4/2015 3:31:00 PM ] Reading phone info...

[ 6/4/2015 3:31:00 PM ] Model: SC-04F

[ 6/4/2015 3:31:00 PM ] Android version: 4.4.2

[ 6/4/2015 3:31:00 PM ] Product code: Not Active

[ 6/4/2015 3:31:00 PM ] Phone version: SC04FOMU1VNF9

[ 6/4/2015 3:31:00 PM ] PDA version: SC04FOMU1VNF9

[ 6/4/2015 3:31:00 PM ] CSC version: SC04FDCM1VNF9

[ 6/4/2015 3:31:00 PM ] CSC country code: JP

[ 6/4/2015 3:31:00 PM ] CSC sales code: DCM

[ 6/4/2015 3:31:00 PM ] HW version:

[ 6/4/2015 3:31:00 PM ] Phone S/N: R38F40SPZSA

[ 6/4/2015 3:31:00 PM ] Modem board: MSM8974PRO

[ 6/4/2015 3:31:00 PM ] RF cal date: NONE

[ 6/4/2015 3:31:00 PM ] IMEI: 352558067456401

[ 6/4/2015 3:31:00 PM ] Checking Super user right... true

[ 6/4/2015 3:31:00 PM ] Backuping MMCBLK... OK

[ 6/4/2015 3:31:00 PM ] Writing data to phone... OK

[ 6/4/2015 3:31:00 PM ] Rebooting phone... OK

[ 6/4/2015 3:32:00 PM ] Waiting ADB device... OK

[ 6/4/2015 3:32:00 PM ] Reading phone info...

[ 6/4/2015 3:32:00 PM ] Model: SC-04F

[ 6/4/2015 3:32:00 PM ] Android version: 4.4.2

[ 6/4/2015 3:32:00 PM ] Product code: Not Active

[ 6/4/2015 3:32:00 PM ] Phone version: SC04FOMU1VNF9

[ 6/4/2015 3:32:00 PM ] PDA version: SC04FOMU1VNF9

[ 6/4/2015 3:32:00 PM ] CSC version:

[ 6/4/2015 3:32:00 PM ] CSC country code: JP

[ 6/4/2015 3:32:00 PM ] CSC sales code: DCM

[ 6/4/2015 3:32:00 PM ] HW version:

[ 6/4/2015 3:32:00 PM ] Phone S/N: R38F40SPZSA

[ 6/4/2015 3:32:00 PM ] Modem board: MSM8974PRO

[ 6/4/2015 3:32:00 PM ] RF cal date: NONE

[ 6/4/2015 3:32:00 PM ] IMEI:

[ 6/4/2015 3:32:00 PM ] Checking Super user right... true



Waiting ADB device... OK

[ 6/4/2015 3:33:00 PM ] Reading phone info...

[ 6/4/2015 3:33:00 PM ] Model: SC-04F

[ 6/4/2015 3:33:00 PM ] Android version: 4.4.2

[ 6/4/2015 3:33:00 PM ] Product code: Not Active

[ 6/4/2015 3:33:00 PM ] Phone version: SC04FOMU1VNF9

[ 6/4/2015 3:33:00 PM ] PDA version: SC04FOMU1VNF9

[ 6/4/2015 3:33:00 PM ] CSC version: SC04FDCM1VNF9

[ 6/4/2015 3:33:00 PM ] CSC country code: JP

[ 6/4/2015 3:33:00 PM ] CSC sales code: DCM

[ 6/4/2015 3:33:00 PM ] HW version:

[ 6/4/2015 3:33:00 PM ] Phone S/N:

[ 6/4/2015 3:33:00 PM ] Modem board: MSM8974PRO

[ 6/4/2015 3:33:00 PM ] RF cal date: NONE

[ 6/4/2015 3:33:00 PM ] IMEI:

[ 6/4/2015 3:33:00 PM ] Checking Super user right... true

[ 6/4/2015 3:33:00 PM ] Extracting EFS file... OK

[ 6/4/2015 3:33:00 PM ] Converting img to ext4... OK

[ 6/4/2015 3:33:00 PM ] Writing EFS to phone... OK

[ 6/4/2015 3:33:00 PM ] Rebooting phone... OK





Reading QCN file... OK

[ 6/4/2015 3:40:00 PM ] Checking phone at COM301

[ 6/4/2015 3:40:00 PM ] Detected ID: 00000FF3 (MSM8974)

[ 6/4/2015 3:40:00 PM ] SW Version: MPSS.DI.2.0.1.c2-00063-M8974AAAAANRZM-1

[ 6/4/2015 3:40:00 PM ] Checking paths... OK

[ 6/4/2015 3:40:00 PM ] Restoring EFS Backup... OK

[ 6/4/2015 3:40:00 PM ] Restoring NV Items... OK

[ 6/4/2015 3:41:00 PM ] Restoring NV Item SIM1... OK

[ 6/4/2015 3:41:00 PM ] Restoring Provisioning Item Files... OK

[ 6/4/2015 3:41:00 PM ] Restore QCN done




Operation: Write CERT

[ 6/4/2015 4:00:00 PM ] Selected model: SM-G900F

[ 6/4/2015 4:00:00 PM ] Selected port: COM14 Z3X BOX Serial Port,

[ 6/4/2015 4:00:00 PM ] Software version: 21.3

[ 6/4/2015 4:00:00 PM ]

[ 6/4/2015 4:00:00 PM ] Checking certificate file... OK

[ 6/4/2015 4:00:00 PM ] KEY ID: 0478

[ 6/4/2015 4:00:00 PM ] Waiting ADB device... OK

[ 6/4/2015 4:00:00 PM ] Reading phone info...

[ 6/4/2015 4:00:00 PM ] Model: SC-04F

[ 6/4/2015 4:00:00 PM ] Android version: 4.4.2

[ 6/4/2015 4:00:00 PM ] Product code: Not Active

[ 6/4/2015 4:00:00 PM ] Phone version: SC04FOMU1VNF9

[ 6/4/2015 4:00:00 PM ] PDA version: SC04FOMU1VNF9

[ 6/4/2015 4:00:00 PM ] CSC version: SC04FDCM1VNF9

[ 6/4/2015 4:00:00 PM ] CSC country code: JP

[ 6/4/2015 4:00:00 PM ] CSC sales code: DCM

[ 6/4/2015 4:00:00 PM ] HW version:

[ 6/4/2015 4:01:00 PM ] Phone S/N: R38F40N963L

[ 6/4/2015 4:01:00 PM ] Modem board: MSM8974PRO

[ 6/4/2015 4:01:00 PM ] RF cal date: 2014.12.26

[ 6/4/2015 4:01:00 PM ] IMEI: 351889060391563

[ 6/4/2015 4:01:00 PM ] Initialization AT RIL... OK

[ 6/4/2015 4:01:00 PM ] Bypass MSL... OK

[ 6/4/2015 4:01:00 PM ] Checking for compatible phone and cert... OK

[ 6/4/2015 4:01:00 PM ] Phone KEY ID: 0478

[ 6/4/2015 4:01:00 PM ] Writing CERT... OK

[ 6/4/2015 4:01:00 PM ] Checking CERT status... OK

[ 6/4/2015 4:01:00 PM ] Rebooting phone... OK

Attached Files

sc-04f qcn n efs.zip (119.5 KB, 12 views)

Read More

Latest Model Unlock Update For Z3x Box v21.3 Setup Download

Z3X Samsung Tool Pro 21.3 Update - *Activate DIAG for Android 5.x WITHOUT ROOT - First in the World

Again hot solution from z3x-team - Activation Diag mode for android 5.x. WITHOUT ROOT!!!!!!!

Again only z3x users have exclusive and hot solution!!

Still not ready to activate Pro version of samsung tool?

So wait next update.



Added:


- support SM-A300HQ(Direct Unlock without root, MSL reset, Write CERT without wipe EFS,QCN read/write)

- support SM-A500HQ(Direct Unlock without root, MSL reset, Write CERT without wipe EFS,QCN read/write)

- support SM-G386T1(Direct Unlock without root, MSL reset, Write CERT without wipe EFS,QCN read/write)

- support SM-P907A(Direct Unlock without root, MSL reset, Write CERT without wipe EFS,QCN read/write)

- support GT-I9507(Direct Unlock without root, MSL reset, Write CERT without wipe EFS,QCN read/write)

- support SM-A700YD(Direct Unlock without root, MSL reset, Write CERT without wipe EFS,QCN read/write)

- support GT-I9195I(Direct Unlock, QCN Read/Write, Read/Write EFS, Write CERT (after wipe), Wipe EFS(NVM))- first in the world

- support SM-G130BU (Direct unlock, Imei repair, Cert patch, Cert read/Write) - first in the world


- support SGH-T189N (flashing, direct *unlockl/read codes/ imei repair) - first in the world

- support SM-G920FD


New algo for direct repair I8550/I8552/I8260/I8262 added:


Fixed:

-*fix I9060I/M G355* missing "patch cert"



Mega Link

Read More