Android Mobile Doctor

Thursday, 23 July 2015

21:39

Huawei Advanced Tool v2.7.2.7.1 More Balong models Added

Unknown Huawei Advanced Tool No comments

Huawei Advanced Tool v2.7.2.7.1 More Balong models Added

ABSOLUTELY FREE, NO CREDITS; NO PACK; NO LOG.

Added to Huawei Balong-Hisi Phones*:

------------------------------------
Pine-CL00 (PE-CL00, Glory 6+ Telecom. Standard Edition) (Permanent Direct Unlock, Permanent Imei Repair, Full Security Area Repair) W1st
Pine-CL10 (PE-CL10, Glory 6+ Telecom high version) (Permanent Direct Unlock, Permanent Imei Repair, Full Security Area Repair) W1st
Pine-TL00M (Glory 6+ Mobile standard version customized) (Permanent Direct Unlock, Permanent Imei Repair, Full Security Area Repair) W1st
Pine-TL10 (PE-TL10, Glory 6+ Double 4G high version) (Permanent Direct Unlock, Permanent Imei Repair, Full Security Area Repair) W1st
Pine-TL20 (Glory 6+ Mobile Standard Edition channels) (Permanent Direct Unlock, Permanent Imei Repair, Full Security Area Repair) W1st
Pine-UL00 (Glory 6+ Unicom standard version) (Permanent Direct Unlock, Permanent Imei Repair, Full Security Area Repair) W1st
PLK-AL10 (Permanent Direct Unlock, Permanent Imei Repair, Full Security Area Repair) W1st
PLK-CL00 (Permanent Direct Unlock, Permanent Imei Repair, Full Security Area Repair) W1st
PLK-TL00 (Permanent Direct Unlock, Permanent Imei Repair, Full Security Area Repair) W1st
PLK-TL01H (Permanent Direct Unlock, Permanent Imei Repair, Full Security Area Repair) W1st
PLK-UL00 (Permanent Direct Unlock, Permanent Imei Repair, Full Security Area Repair) W1st

** Improved comunication for Android 5.xx

**USB DEBUG ON and ROOTED, * Hisilicon/Infineon/Balong/ Method/ Manufacturer Mode:

This method is based on some special code including ZZ key software.
When you type * # * # 2846579 # * # * Project Menu-> background
setting-> USB ports setting-> USB ports Setting-> Manufacturer
Mode phone automatically switch the port.

***Huawei Bootloader Password FREE for All zZKey customers here (5mins to few hours)

Added Support for ALL latest Qualcomm/Balongs/Hisilicon Huawei phone-tablet models.

DISCLAIMER:

--------------------------
The change
IMEI/MEID option has been created by our zZ-Team only with the objective
of repair the original IMEI/MEID. Any illegal use with the
IMEI/MEID, changes or modifications of the original IMEI, are on
their own responsibility. Our zZ-Team no assumes responsibility to
misuse of this software.

Download from DOWNLOAD | zZ-Key

-> Firmwares Added:
Huawei Pine-CL00 (PE-CL00, Glory 6+ Telecom. Standard Edition)

Pine-CL00_V100R001C92B187_Firmware_China_ChinaTelecom_A ndroid_4.4.2_EMUI_3.0_05012QMH.zip
Huawei Pine-TL00M (Glory 6+ Mobile standard version customized)

Pine-TL00M_V100R001C01B186_Firmware_China_ChinaMobile_A ndroid_4.4.2_EMUI_3.0_05012HXM.zip
Huawei Pine-TL10 (PE-TL10, Glory 6+ Double 4G high version)

Pine-TL10_V100R001C900B130_Firmware_Russian_Region_oper atorValue_Android_4.4.2_EMUI_3.0_05012WEU.zip

Pine-TL10_V100R001C900B131_Firmware_Southern_Pacific_Re gion_operatorValue_Android_4.4.2_EMUI_3.0_05012WCQ .zip

Pine-TL10_V100R001CHNC00B186_Firmware_China_ChinaMobile _Android_4.4.2_EMUI_3.0_05012HXK.zip
Huawei Pine-TL20

Pine-TL20_V100R001CHNC00B186_Firmware_China_Android_4.4 .2_EMUI_3.0_05012HXJ.zip
Huawei Pine-UL00

Pine-UL00_V100R001CHNC00B186_Firmware_China_ChinaUnicom _Android_4.4.2_EMUI_05012QMJ.zip

SURPRISE AGAIN!!!!!!!!!!!!!! FREE CREDITS FOR MOST SUCESSFUL USER REPORT

1- @Gokuu2007 -> 10 FREE Credits

2- @medie -> 5 FREE Credits

3- @netmobile -> 5 FREE Credits

4- @rogerboogie -> 5 FREE Credits

5- @cvivas23 -> 5 FREE Credits

Please Contact US!!!

Do You Want free zZKey credits? Of course is your turn now, report success logs of Huawei Module, SMARTZ Module, and you will be the next winner!!!

---------------------------------
Now, Follow US On The Social Networks!!!
Twitter: @TeamZzkey Facebook: zzkey.fanpage Youtube: zZKEYTEAM
Instagram: ZZKEYTEAM
Best Regards

zZKey-Team

21:36

UBISLATE 7CZ 8312D MT6571 eMMC. This Firmware Will Kill Phone. My Dear Best Friend,

Unknown No comments

UBISLATE 7CZ 8312D MT6571 eMMC. This Firmware Will Kill Phone. My Dear Best Friend,

This Cellphone Status : After Power On Show "Datawind + UBISLATE 7CZ Then Quickly Off.

Operation : Check / Read Info [ v1.24 ]

Code:

1. Power Off Phone , Remove battery , Insert back
2. Insert USB cable. In some cases require hold BootKey

Wait for phone...
Phone found! [ 198 ]
Sync...
Inital regs read done
Boot Info : 
BB_CPU_ID : 6571
BB_CPU_HW : CA00
BB_CPU_SW : 8D00
BB_CPU_SB : 0000
BB_CPU_NM : [MediaTek] MT6571_S00
Processing BROM stage
BLVersion : 0x01
SecCfgVal : 0x00000000
BromVersion : 0xFF
BLVersion : 0x01
Preloader Status : Alive
Processing DA stage
DA Select done , sending 
NAND_ID : 00000000000000000000000000000000
eMMC_ID : 15010034594D4433520124A9620C41E7
DA Stat : v4.2 on BBID : 0x8B
DA Sent. Configure setting now ... 
DA started successuflly
eMMC FlashIC initialized
[eMMC] : FLASH_VEN : 0015 , OEM : 0100
[eMMC] : FLASH_INF : R3DMY
[eMMC] : FLASH_CID : 15010034594D4433520124A9620C41E7
[eMMC] : FLASH_LEN : 0x00000000E9000000
INT RAM    : 0x00020000
EXT RAM    : 0x20000000
BOOT TYPE  : EMMC_FLASH_BOOT
SOC VERIFY : C1
Boot Ok!

[AP] : Initial info read Ok!

Brand     : 8312D
ProdName  : 8312D
ProdModel : 8312D
Device    : 8312D
AndroidVer: 4.4.2
MTKxCPU   : MT6571
MTKxPRJ   : ALPS.KK1.MP7.V1.13

Done!
Elapsed: 00:00:24
Reconnect Power/Cable!

Operation : Format FileSystem [ v1.24 ]

Code:

1. Power Off Phone , Remove battery , Insert back
2. Insert USB cable. In some cases require hold BootKey

Wait for phone...
Phone found! [ 198 ]
Sync...
Inital regs read done
Boot Info : 
BB_CPU_ID : 6571
BB_CPU_HW : CA00
BB_CPU_SW : 8D00
BB_CPU_SB : 0000
BB_CPU_NM : [MediaTek] MT6571_S00
Processing BROM stage
BLVersion : 0x01
SecCfgVal : 0x00000000
BromVersion : 0xFF
BLVersion : 0x01
Preloader Status : Alive
Processing DA stage
DA Select done , sending 
NAND_ID : 00000000000000000000000000000000
eMMC_ID : 15010034594D4433520124A9620C41E7
DA Stat : v4.2 on BBID : 0x8B
DA Sent. Configure setting now ... 
DA started successuflly
eMMC FlashIC initialized
[eMMC] : FLASH_VEN : 0015 , OEM : 0100
[eMMC] : FLASH_INF : R3DMY
[eMMC] : FLASH_CID : 15010034594D4433520124A9620C41E7
[eMMC] : FLASH_LEN : 0x00000000E9000000
INT RAM    : 0x00020000
EXT RAM    : 0x20000000
BOOT TYPE  : EMMC_FLASH_BOOT
SOC VERIFY : C1
Boot Ok!


Backup : not found, will read now ... 
FMT Mode set to : 0
Format : UserData Only (Factory Reset)

Format UDA block
Format block Ok!

Done!
Elapsed: 00:00:59
Reconnect Power/Cable!

After Format Problem Didn't Solve, So I Decided To Read Factory Firmware & Write On This Cellphone.

Operation : Read Flash [ v1.24 ]

Code:

1. Power Off Phone , Remove battery , Insert back
2. Insert USB cable. In some cases require hold BootKey

Wait for phone...
Phone found! [ 198 ]
Sync...
Inital regs read done
Boot Info : 
BB_CPU_ID : 6571
BB_CPU_HW : CA00
BB_CPU_SW : 8D00
BB_CPU_SB : 0000
BB_CPU_NM : [MediaTek] MT6571_S00
Processing BROM stage
BLVersion : 0x01
SecCfgVal : 0x00000000
BromVersion : 0xFF
BLVersion : 0x01
Preloader Status : Alive
Processing DA stage
DA Select done , sending 
NAND_ID : 00000000000000000000000000000000
eMMC_ID : 15010034594D4433520124A9620C41E7
DA Stat : v4.2 on BBID : 0x8B
DA Sent. Configure setting now ... 
DA started successuflly
eMMC FlashIC initialized
[eMMC] : FLASH_VEN : 0015 , OEM : 0100
[eMMC] : FLASH_INF : R3DMY
[eMMC] : FLASH_CID : 15010034594D4433520124A9620C41E7
[eMMC] : FLASH_LEN : 0x00000000E9000000
INT RAM    : 0x00020000
EXT RAM    : 0x20000000
BOOT TYPE  : EMMC_FLASH_BOOT
SOC VERIFY : C1
Boot Ok!

Reading Flash Conent now ... 

Brand     : 8312D
ProdName  : 8312D
ProdModel : 8312D
Device    : 8312D
AndroidVer: 4.4.2
MTKxCPU   : MT6571
MTKxPRJ   : ALPS.KK1.MP7.V1.13

[Read Ok] : preloader_along12d_tb_kk.bin
[Read Ok] : MBR
[Read Ok] : EBR1
[Read Ok] : lk.bin
[Read Ok] : boot.img
[Read Ok] : recovery.img
[Read Ok] : secro.img
[Read Ok] : logo.bin
[Read Ok] : system.img
[Read Ok] : cache.img
[Read Ok] : userdata.img

[ScatCFG] : MT6571 / V1.1.1 / along12d_tb_kk / EMMC
FW Size : 697 MiB
Scatter saved to : C:\InfinityBox\CM2MTK\Flash\MT6571__8312D__8312D__8312D__4.4.2__ALPS.KK1.MP7.V1.13\

All done!

Done!
Elapsed: 00:03:54
Reconnect Power/Cable!

Operation : Flash [ v1.24 ]

Code:

======= Flash
1. Power Off Phone , Remove battery , Insert back
2. Insert USB cable. In some cases require hold BootKey

Wait for phone...
Phone found! [ 198 ]
Sync...
Inital regs read done
Boot Info : 
BB_CPU_ID : 6571
BB_CPU_HW : CA00
BB_CPU_SW : 8D00
BB_CPU_SB : 0000
BB_CPU_NM : [MediaTek] MT6571_S00
Processing BROM stage
BLVersion : 0x01
SecCfgVal : 0x00000000
BromVersion : 0xFF
BLVersion : 0x01
Preloader Status : Alive
Processing DA stage
DA Select done , sending 
NAND_ID : 00000000000000000000000000000000
eMMC_ID : 15010034594D4433520124A9620C41E7
DA Stat : v4.2 on BBID : 0x8B
DA Sent. Configure setting now ... 
DA started successuflly
eMMC FlashIC initialized
[eMMC] : FLASH_VEN : 0015 , OEM : 0100
[eMMC] : FLASH_INF : R3DMY
[eMMC] : FLASH_CID : 15010034594D4433520124A9620C41E7
[eMMC] : FLASH_LEN : 0x00000000E9000000
INT RAM    : 0x00020000
EXT RAM    : 0x20000000
BOOT TYPE  : EMMC_FLASH_BOOT
SOC VERIFY : C1
Boot Ok!

ScatCFG : BaseBand : MT6571 , Project : along12d_tb_kk , Storage : EMMC
Setting : Flash Pre-Erase (Safe) : Enabled
Setting : AFF verify :  Enabled

BL : Check HW compatibility
BL : BBID supported by BootLoader!
BL : Check eMMC compatibility
BL : eMMC NOT supported by BootLoader!
[BL_ERROR] : STORAGE : Break Flashing! This Firmware will kill phone!

Done!
Elapsed: 00:00:26
Reconnect Power/Cable!

Just Reference of Same Model Thread.

08:48

Algeria & Worlwide: iCloud Clean imei service, lumia any model direct unlock, Con ...

Unknown No comments

Algeria & Worlwide:

iCloud Clean imei service 100% Result

Lumia any model locked to any network Direct unlock

New Boxes @ Stock : Octopus ( lg + samsung ), MFC Dongle, Sigma Box, IP Box, Volcano box .....

for more infos:

Contact person: khaled

Phone: +213553082647

Email: khaledgsm@gmail.com

Sonork: 100.1592956

Skype: khaled_elathary

Gtalk (Chat): khaledgsm@gmail.com

Viber/WhatsApp:00213553082647

Web:MYUNLOCKSHOP

08:36

GoodOne Kick Pattern Lock Reset Done ! No data Lose No Need Format ! Merapi Tool

Unknown No comments

GoodOne Kick Pattern Lock Reset Done
! No data Lose No Need Format !

=== Merapi Tool ===

Feel the Power of Real Volcano

Fell The Real Power Of Merapi Tool

Follow Us on Twitter for always Update to Date:
https://twitter.com/GPGWorld

Follow us on Facebook
https://www.facebook.com/GPGINDUSTRIESWORLD

Wednesday, 22 July 2015

07:31

VolcanoBox 3.0.5 MTK8127, MTK6752, MTK6752 & Pattern lock, Pin Locl Reset & Adb Root VolcanoBox 3.0.5

Unknown No comments

VolcanoBox 3.0.5

What's New ?

MT8127、MT8135、MT6752 add new flash support.

to solve the MTK Android +EMMC ,reset Pattern lock, PIN lock, Password lock.

Add new phone for ADB Root.

This is Normal VolcanoBox update. This update don't need MerapiTool Activation

Download
Index of ./VolcanoBox/

All Updates & History :
VolcanoBox Update History / Updates All in one place

Follow Us on Twitter for always Update to Date:
https://twitter.com/GPGWorld

Follow us on Facebook
https://www.facebook.com/GPGINDUSTRIESWORLD