Android Mobile Doctor

i am try to connect mx428 but not getting any success so i decide Google

but i am only find that two thread with no working solution

maxx mx428 user code how to connect with volcano

How to connect this handset?

now here is a full working solution for that model

you need to open mobile

short boot pin with gnd and put usb cable to phone

here flash reading proof

Root instruction:

Download the Unlock Root software. Get it straight from the developer’s website.

Enable
USB Debugging mode on your device. You can do this by going to Settings
> Applications > Development on your device.

Connect your device to your PC using a USB cable.

Run “UnlockRoot.exe”. Wait for your handset to be automatically detected.

Choose your device from the list of autodetected devices.

Click the Root button to start the rooting process.

Wait
for it to complete the installation, after which you’ll be greeted with
a message saying your device has been successfully rooted.

After the rooting process, simply reboot your device for the changes to take effect.

Congratulations! You have successfully rooted your device.

Download file:

Unlock Root

- All the credit to Skin for his cf-root and his great help in resolving issues.

- UtterChaos Kernel Credit goes to DoomLord and Napster.

- Cwm 5.0.2.8 (Credit Amit Bagaria)

XWLF2, DDLF2 and XXLE4 will require clean Firmware Flash for the CF-root to work.

If You are already using any other CF-root, these CF-roots won't probably work.

Flash the Firmware again and then flash the CF-root.

Here are the links.

JPKPH-CFROOT-26-03-2013.tar

ZCKPL-CFROOT-13-03-2013.tar

XWLJ2-CFROOT-15-02-2013.tar

POLJ1-CFROOT-08-11-2012.tar

XWLF3-CFROOT-12-07-2012.tar

XWLF2_CFROOT-05-07-2012.tar (CWM 5.0.2.8)

XWLF2-CFROOT-30-06-2012.tar

DDLF2_CFROOT-05-07-2012.tar (CWM 5.0.2.8)

DDLF2-CFROOT-30-06-2012.tar

XXLE4_CFROOT-05-07-2012.tar (CWM 5.0.2.8)

XXLE4-CFROOT-30-06-2012.tar

ZHKPE-CFROOT-25-05-2012.tar

JXKP3-CFROOT-25-05-2012.tar

XXKPU-CFROOT-29-02-2012.tar

DDKP3-CFROOT-12-02-2012.tar

DDKP2-CFROOT-23-12-2011.tar

DDKP2-CFROOT-19-12-2011.tar

DDKP1-CFROOT-23-12-2011.tar

DDKP1-CFROOT-19-12-2011.tar

XXKPQ-CFROOT-UCK-16-12-2011.tar

With UC Kernel V6.

CFROOT-XXKPQ-17-11-2011.tar

Module: tun.ko for XXKPQ.

CF-ROOT-XIKP2-16-11-2011.tar

CF-ROOT-ZHKPD-11-11-2011.tar

Module: tun.ko for ZHKPD.

CF-ROOT-XXKPN-09-11-2011.tar

Module: tun.ko for XXKPN.

CF-ROOT-XWKPG-08-11-2011

CF-ROOT-DXKP9-10-11-2011.tar

Module: tun.ko for DXKP9.

CF-ROOT-ZCKP9-12-11-2011.tar

Flash it with ODIN as PDA.

Quote:

Installing a new rom - This is the way I do it.

I really don't know about other's. But when I am moving to a new rom, I always follow these steps and have never had issues.

Read the concerned ROM post and if you dont understand ask for installation procedures.

Take backup of all the apps to external sd card. I prefer titanium backup.

Powerdown phone and Remove the external sd card.

Do a factory reset and reboot.

Start ODIN and fill in the required tabs as per requirement.

Go to Download mode on the phone and connect the phone to pc and ensure that ID:COM shows Yellow.

Flash the firmware and wait until the phone reboots and the odin shows green color.Now you can remove the usb cable.

Once rebooted, do a factory reset again.

From recovery clear Cache and reboot.

Once all the above are done and you have ensured that the phone is functioning normally, go for the mods.

Quote:

How to convert to Ext4

First make a Nandroid Backup via CWM.

Download the Ext4 convertor script here.

Copy it to the root of the External Sd Card of the Phone.

Go to Recovery.

Flash the Ext4 Script. (Pl. Do not reboot the phone after this)

Restore the Nandroid backup immediately.

Reboot and enjoy Ext4.

Quote:

How to Un-Root

Download and flash this from recovery. UnRoot.zip

Quote:

How to port cf-root for all GB firmware (I9003): LINK

Enjoy

Disclaimer : I AM NOT RESPONSIBLE FOR ANY DAMAGE TO YOUR PHONE AND DO AT YOUR OWN RISK

Attached Files

	Dxkp9.tun.ko.tar - [Click for QR Code] (210.0 KB, 2267 views)
	xxkpn.tun.ko.zip - [Click for QR Code] (86.8 KB, 2133 views)
	DDKP3.tun.ko.zip - [Click for QR Code] (86.8 KB, 779 views)

This model of Samsung is very Great phone to have as many Users confirm, and many new Firmware updates was released for it, So in this Guide we try to show you the right steps you have to follow to update your Samsung I9000 Galaxy S firmware Fast and Safe.

Make sure that you have fully charged phone's battery and keep in mind that all your information on this phone will be erased, So you need to make a backup of them before Firmware update process.

Some of Samsung I9000 Galaxy S Features:

GSM 850 / 900 / 1800 / 1900

HSDPA 900 / 1900 / 2100

LCD Super AMOLED capacitive touchscreen, 16M colors

Gorilla Glass display

TouchWiz 3.0 UI

Multi-touch input method

Accelerometer sensor for UI auto-rotate

Touch-sensitive controls

Proximity sensor for auto turn-off

Internal Memory : 8 GB/16GB storage, 512 MB RAM, 2GB ROM

MMC microSD, up to 32GB

Wi-Fi 802.11 b/g/n, DLNA, Wi-Fi hotspot

Bluetooth v3.0 with A2DP

Camera 5 MP, 2592 x 1944 pixels, autofocus

Geo-tagging, touch focus, face and smile detection

Android OS

FM radio with RDS

A-GPS support

Social networking integration

Digital compass

MP4 / DivX / WMV / H.264 / H.263 player

MP3 / WAV / eAAC+ / AC3 / FLAC player

TV-out

Organizer

Image/video editor

Document editor (Word, Excel, PowerPoint, PDF)

Google Search, Maps, Gmail,YouTube, Calendar, Google Talk, Picasa integration

Voice memo/dial/commands

Predictive text input (Swype)

Firmware Update Steps:
Run Samsung I9000 Galaxy S Downloader.
Check Re-Partition option and then Cleck PIT button to select: s1_odin_20100xxx.pit file.
Click PDA button and select : I9000xxxxx-REV03-PDA-low-CL584433.tar.md5
Click PHONE button and select: MODEM_I9000xxxxx.tar.md5
Click CSC button and select: GT-I9000-CSC-MULTI-Oxxxxx.tar.md5
Put the phone into download mode: Press Volume Down + OK + Power Key.
Connect USB cable to Phone and PC.
Make sure that the program has detects the phone.
Press Start button and wait.
When all is done the program will show you PASS! word.
Turn on the phone and do full reset: *2767*3855#

Samsung I9000 Galaxy S Original Firmwares.
I9000 USB Drivers
Samsung I9000 Galaxy S Root Files
Related Articles
How To Update Firmware Of Samsung I6220 Star TV
How To Update Samsung F490 Firmware
How To Flash Samsung I750
How To Update Samsung T999 Galaxy S3 Firmware By Using Odin Flasher And Official Firmware Package
How To Flash Samsung D900E

Galaxy Note 8.0 N5110/N5100 is among the lucky few
Android devices to taste the official Jelly Bean firmware from Samsung.
After a long wait, the popular 8in tablet gets its first official Jelly
Bean update via Android 4.1.2 XXBMC9 firmware.

The firmware is now available for download through Samsung KIES for
the UK and European users. However, those residing outside Europe (who
cannot wait for the official release) and those who missed the
opportunity can now download and install the same manually using this
guide.

How to Update Galaxy Note 8.0 N5110/N5100 to Official Android 4.1.2 XXBMC9 Jelly Bean Firmware

Android 4.1.2 XXBMC9 Official Firmware Details

Follow us

Follow @IBTimesUK

PDA: N5110XXBMC9

CSC: N5110OXEBMC7

Version: 4.1.2

Date: 2013 March

Key Points to Note

XXBMC9 official Jelly Bean firmware and the instructions given in this guide are applicable to the Galaxy Note 8.0 N5110/N5100 models
only. Do not attempt this procedure on any other device, as it may hard
brick or permanently damage the device. Verify the device's model
number by navigating to Settings > About Tablet.

Back up important data and settings on the tablet
using one of the recommended custom recovery tools such as ClockworkMod
(CWM) or TWRP, as it creates a complete image of the existing tablet
setup.

Verify that the correct USB drivers are installed for Galaxy Note 8.0 on computer (download USB drivers).

Ensure that USB Debugging mode is enabled on the
tablet by navigating to Settings > Developer Options (if the device
is running on Android 4.0 or later) or Settings > Applications >
Development (if the phone is running on Android 2.3 or earlier).

Make sure that the tablet has at least 80 per cent battery charge to
prevent unexpected device shutdown (due to battery drain) during
firmware installation, as this may inadvertently brick or damage the
device.

Double check to see that the device is factory unlocked (not locked to a specific carrier) and rooted with CWM recovery installed on it.

As this is an official release, root access to the device will be lost
soon after installing the firmware. Just root the tablet again to
restore full system access and be able to install third-party root apps,
custom ROMs and latest system tweaks.

If the device is stuck at booting or is facing intermittent boot loop issues after installing the firmware, then perform Wipe Cache Partition and Wipe Dalvik Cache for four to five more times before rebooting.

The instructions provided in this guide are meant for reference purpose only. IBTimes UK
will not be held liable if the device is damaged while installing the
official firmware. Users are advised to proceed at their own risk.

Downloads

Download Android 4.1.2 N5110XXBMC9 or Android 4.1.2 N5100XXBMC9 official firmware for Galaxy Note 8.0 on the computer and extract the zip file.

Download ODIN v1.85 which is needed to install the official firmware on the tablet.

How to Update Galaxy Note 8.0 N5110/N5100 to Official Android 4.1.2 XXBMC9 Jelly Bean Firmware

Step 1 - Turn off the tablet and boot it into
Download Mode by pressing and holding Volume Up and Power button
together until the construction Android robot icon with a triangle
appears on screen. Hit the Power button again to progress into Download
Mode.

Step 2 - Launch ODIN on computer and connect the tablet to it while the tablet is still in Download Mode.

Step 3 - When the tablet connects successfully, one
of the ID: COM boxes will indicate yellow with the corresponding COM
port number. This process may be time-consuming and may take about five
minutes. So, leave it alone.

Step 4 - Choose the files that need to be flashed or installed on the tablet, which can be found among the extracted files in Step 1.

Click the 'PDA' checkbox and choose the file named 'CODE' or '.tar'.

Select the 'Phone' checkbox and choose the file named 'MODEM'. Ignore this step if there is no such file.

Hit the 'CSC' checkbox and click the file named 'CSC'. Ignore this step if such file is missing.

Click the 'PIT' checkbox and select the .pit file. Ignore this step if such file is absent.

Step 5 - In ODIN, enable Auto Reboot and F. Reset
Time options. But, the Re-Partition option must be checked only if a
.pit file was chosen in the previous step.

Step 6 - Hit Start button in ODIN and the firmware installation process will begin. It would take just a few minutes to complete.

Step 7 - Once the firmware installation is done, the
tablet will reboot. Once the home screen boots-up, just disconnect the
tablet from the computer.

Samsung Galaxy Note 8.0 is now successfully updated to Android 4.1.2
XXBMC9 official firmware. Go to Settings > About Phone to verify the
firmware version installed.

Mobile ODIN Lite v3.57 GT-S5570 Support - Flash Firmware on your device

Mobile ODIN is the on-device firmware flasher of choice. Just throw
those firmware files on your (internal or external) SD card, start
Mobile ODIN and flash away.

Download this file:

[apk] Mobile ODIN Lite v3.57 (GT-S5570 Support)

http://www.mediafire.com/?b83dkv34vabpdwj

[apk] Mobile ODIN FlashKernel GT-S5570

http://www.mediafire.com/?b1tmbmpje3ny9lq

Please don't make mirror

Flashing Method for One Package:

1. Install both apk you've downloaded

2. Open Mobile ODIN Lite

3. Tap "Open file ..."

4. Select the firmware file (. tar /. tar.md5)

5. Tap "Flash Firmware"

6. Wait until the process is complete

Mobile ODIN v3.65

Mobile ODIN is the on-device firmware flasher of choice. Just throw
those firmware files on your (internal or external) SD card, start
Mobile ODIN and flash away.

! Your device must be rooted to be able to use Mobile ODIN. Check the list below to see if your device is supported !

If you use the EverRoot option (Market/Pro version only), Mobile ODIN
will root the firmware while you flash it. Checking out that new leaked
firmware? No reason to lose root!

All partitions are supported, as are loose files, .tar files and
.tar.md5 files. Mobile ODIN will even check the MD5 signatures before
flashing. While in theory Mobile ODIN can repartition and flash EFS and
bootloaders, it will cowardly refuse to do so, for your own safety.

Currently supported devices:

- Samsung Galaxy S GT-I9000

- Samsung Galaxy S GT-I9000B

- Samsung Galaxy S GT-I9000M

- Samsung Galaxy S GT-I9003

- Samsung Galaxy S GT-I9003L

- Rogers Captivate SGH-I896

- AT&T Captivate SGH-I897

- Samsung Galaxy S2 GT-I9100

- Samsung Galaxy S2 GT-I9100T

- Samsung Galaxy S2 GT-I9100G

- Samsung Galaxy S2 GT-I9100M

- Samsung Galaxy S2 SHW-M250S

- Samsung Galaxy S2 SHW-M250K

- Samsung Galaxy S2 SC-02C

- AT&T Galaxy S2 SGH-I777

- Sprint/Virgin/Boost Epic 4G Touch SPH-D710/VMUB/BST

- USCC Galaxy S2 SCH-R760

- Samsung Galaxy S3 GT-I9300

- Samsung Galaxy S3 GT-I9300T

- Samsung Galaxy S3 GT-I9308

- AT&T Galaxy S3 SGH-I747

- Canadia Galaxy S3 SGH-I747M

- TMOUS Galaxy S3 SGH-T999

- Sprint Galaxy S3 SPH-L710

- VZW Galaxy S3 SCH-I535 (unlock bootloader !)

- USCC/Cricket/MetroPCS Galaxy S3 SCH-R530/U/M/C

- Samsung Galaxy S3 LTE SHV-E210S

- Samsung Galaxy S3 LTE GT-I9305

- Samsung Galaxy S3 LTE GT-I9305T

- Samsung Galaxy S3 LTE GT-I9305N

- Google Galaxy Nexus (GSM) Maguro/Yakju/GT-I9250

- Google Galaxy Nexus (CDMA/LTE) Toro/Mysid/SCH-I515 (no cdma radio flashing)

- Samsung Galaxy Note GT-N7000

- Samsung Galaxy Note GT-I9220

- Samsung Galaxy Note GT-N7000B

- Samsung Galaxy Note 2 GT-N7100

- Samsung Galaxy Note 2 LTE GT-N7105

- AT&T/Canadia Galaxy Note 2 SGH-I317/M

- TMOUS Galaxy Note 2 SGH-T889

- Sprint Galaxy Note 2 SPH-L900

- VZW Galaxy Note 2 SCH-I605 (unlock bootloader !)

- USCC Galaxy Note 2 SCH-R950

- Samsung Galaxy Note 10.1" GT-N8000

- Samsung Galaxy Note 10.1" Wi-Fi GT-N8010/N8013

- Samsung Galaxy Tab 7" GT-P1000

- Samsung Galaxy Tab 7.0 Plus GT-P6200

- Samsung Galaxy Tab 7.0 Plus Wi-Fi GT-P6210

- Samsung Galaxy Tab 7.0 Plus GT-P6200L

- Samsung Galaxy Tab 7.7" GT-P6800

- Samsung Galaxy Tab 7.7" Wi-Fi GT-P6810

- Samsung Galaxy Tab 10.1" GT-P7500

- Samsung Galaxy Tab 10.1" Wi-Fi GT-P7510

- Samsung Galaxy Tab 2 7" GT-P3100

- Samsung Galaxy Tab 2 7" Wi-Fi GT-P3110/P3113

- Samsung Galaxy Tab 2 10" GT-P5100

- Samsung Galaxy Tab 2 10" Wi-Fi GT-P5110/P5113

- Samsung Galaxy 5 GT-I5500

- Samsung Galaxy 5 GT-I5500B

- Samsung Galaxy 5 GT-I5500L

- Samsung Galaxy 5 GT-I5500T

- Samsung Galaxy 5 GT-I5500M

- Samsung Galaxy 5 GT-I5503

- Samsung Galaxy 5 GT-I5503T

- Samsung Galaxy 5 GT-I5508

More devices to come!

Flashing with Mobile ODIN does NOT increase your custom kernel flash counter or make the yellow warning triangle appear.

! USE AT YOUR OWN RISK !

Credits

Aside from my own CF-Root-based flashkernels, Mobile ODIN also uses (with permission) flashkernels built by these users:

- Codeworkx (I777, D710)

- Skin1980 (I9003)

- Kyuta Syoko (I896, I897)

- Psyke83 (I5500)

Also many thanks to the various testers!

Download

Mobile ODIN Pro - Android Market / Google Play

Attached is the Lite version of Mobile ODIN - this is a release exclusive to XDA and may not be redistributed ! Please note that you also need to download and install a "FlashKernel" manually if you are using the Lite version. These are listed a few posts down from here. The Pro version will automatically download and install these for you when needed.

( < 3.65: 203995 )

Attached Thumbnails