HTC J ISW13HT (HTC Valente) Unbrick – Dead boot repair supported Repairing bricked HTC Valente (PK0710000) is easy with the RIFF Box.

 Phone is auto powered on with USB Data Cable connected to the PC while battery is connected.

Additionally to SPL and Radio zones, the zone which contains Model ID is
re-flashed too. Thus after resurrection phone will have Model ID =
‘PK0710000’.

To resurrect HTC Valente (PK0710000):

•  Solder JTAG cable to HTC Valente (PK0710000) JTAG pads;


•  Insert batter and connect USB Data cable;


•  Make sure HTC Valente (PK0710000) is selected in the list of models;


•  If you use only battery, press Power On key;


•  Click Resurrect button;


•  Wait till software signals a successful operation completion;


•  Disconnect power supply, de-solder JTAG wires;

Now phone is in bootable condition, that is, even if it does not
start up normally you can flash it using known flashing methods.

To enter download mode:

•  Disconnect PC cable;


•  Insert battery;


•  Hold ‘Volume Down’ key and press ‘Power ON’ button.

.