HTC T329w (HTC Proto) Unbrick – SuperCID – IMEI repair supported

Repairing
bricked HTC Proto (PM6610000) is easy with the RIFF Box. Phone is auto
powered on with USB Data Cable connected to the PC. Battery presence may
be required.
In case you have no USB cable near, make sure battery
is charged enough and hold Power On button during initiation of JTAG
connection.
Resurrector will reflash radio’s boot zone and will
re-write PDA’s SPL to 1.12.0002 version. Additionally to SPL and Radio
zones, the zone which contains Model ID may be re-flashed too. In this
case after resurrection the phone will have Model ID = ‘PM661****’.

To resurrect HTC Proto (PM6610000):

•  Solder JTAG cable to HTC Proto (PM6610000) JTAG pads;


•  Insert USB Data cable into board and PC;


•  Make sure HTC Proto (PM6610000) is selected in the list of models;


•  If you use battery, press Power On key;


•  Click Resurrect button;


•  Wait till software signals a successful operation completion;


•  Disconnect power supply, de-solder JTAG wires;

Now
phone is in bootable condition, that is, even if it does not start up
normally, you can flash it using known flashing methods.

To enter download mode:

•  Disconnect PC cable;


•  Insert battery;


•  Hold ‘Volume Down’ key and press ‘Power ON’ button.

.