ctoplus JTAG Software v.1.8.9 is out!

Octoplus JTAG Software v.1.8.9 is out!
We have added Boot Repair via USB and small TP for LG P930, LG LU6200

and via JTAG for HTC One M7 (PN0720000) and Huawei Y300-0000!
Octoplus Box JTAG Software v.1.8.9 Release Notes

• Added support for the following models:

- LG P930 - added Dead Boot Repair via USB

- LG LU6200 - added Dead Boot Repair via USB

- Huawei Y300-0000 - added Dead Boot Repair via JTAG (thanks to Mr. Dr_Wolodya)

- HTC One M7 (PN0720000) - added Dead Boot Repair, Repair IMEI, Repair CID via JTAG

• All pinouts and Repair procedures are described in the manual ("Help" button in Software)

To repair LG P930 and LG LU6200 via USB, please follow the next three steps:

1. Attach
   testpoint as shown on Figure 1 in the Software manual and connect your
   phone using Micro USB cable directly into the mainboard’s USB port
   
   (do NOT use any USB hubs!)


2. Check PC Device Manager, a
   new device should appear "Qualcomm HS-USB QDLoader 9008" or "Unknown
   Device" if you hadn’t installed the driver yet.
   
   Drivers are in {Installation_Folder}\Driver\QHSUSB


3. Release testpoint and press “EasyRepair” button in the software (or “Connect” button, when in Advanced Mode)

http://www.youtube.com/watch?v=cv258XftyEg

http://www.youtube.com/watch?v=_pXFuuoOXBk

Download Octoplus Box JTAG Software v.1.8.9

Find out more at: www.octoplusbox.com