Samsung GT-P5100 Galaxy Tab 2 10.1 Unbrick – Dead Boot repair supported Samsung P5100 is based on the OMAP4430 Processor (Cortex-A9 Dual-Core).

JTAG pads are very small; professional experience in soldering is required to connect wires to the JTAG interface.

Please note: The initial loader in the Samsung P5100 is XLOADER. Due to
OMAP4430’s some peculiar TrustZone security features current resurrector
will boot only in case XLOADER is alive. That’s why model name of
current resurrector has additional text: ‘XLoader+’. In case XLOADER is
damaged (which happens for example after wrong firmware reflash), you
will have to use different resurrector DLL – the one with the ‘XLoader-”
delimiter.

To resurrect Samsung P5100:

•  Solder JTAG cable to Samsung P5100 JTAG pads;


•  Connect USB cable to phone and PC;


•  Insert battery;


•  Make sure Samsung P5100 is selected in the list of models;


•  Make sure a fixed TCK frequency is selected;


•  Click Resurrect button;


•  Wait till software signals a successful operation completion;


•  Disconnect USB cable, de-solder JTAG wires;

Now phone is in bootable condition, that is, even if it does not
start up normally, you can flash it using original Samsung downloader
software to restore it to the working state.

To enter download mode:

•  Disconnect PC cable;


•  Insert battery;


•  Hold ‘Volume Down’ key and press Power-On.

.

Read More

LG E900 Optimus 7 Unbrick – Dead Boot repair supported Repairing bricked LG E900 with the RIFF Box requires non-beginner soldering skills (since JTAG pads on board are very small and are close to each other).

Phone is auto powered on with USB Data Cable connected to the PC.
Battery presence is not required; connection can be established with
detached board.

To resurrect LG E900:

•  Solder JTAG cable to LG E900 JTAG pads;


•  Insert USB Data cable into board and PC;


•  Make sure LG E900 is selected in the list of models;


•  Click Resurrect button;


•  Wait till software signals a successful operation completion;


•  Disconnect power supply, de-solder JTAG wires;

Now phone is in bootable condition, that is, even if it does not
start up normally, you can flash it using known flashing methods

To enter emergency mode:

•  Disconnect PC cable;


•  Insert battery;


•  Hold both ‘Volume down’ and ‘Camera’ keys and press ‘Power ON’ button.

.

Read More

HTC One X AT&T(PJ8310000) Unbrick, IMEI, SuperCID repair supported Repairing bricked HTC OneX (PJ8310000) is easy with the RIFF Box.

 Phone is auto powered on with USB Data Cable connected to the PC. Battery presence may be required.

In case you have no USB cable near, make sure battery is charged enough
and hold Power On button during initiation of JTAG connection.

Resurrector will reflash radio’s boot zone and will re-write PDA’s SPL
to 1.09.0000 version. Additionally to SPL and Radio zones, the zone
which contains Model ID is re-flashed too. Thus after resurrection phone
will have Model ID = ‘PJ8310000’.

To resurrect HTC OneX (PJ8310000):

•  Solder JTAG cable to HTC OneX (PJ8310000) JTAG pads;


•  Insert USB Data cable into board and PC;


•  Make sure HTC OneX (PJ8310000) is selected in the list of models;


•  If you use battery, press Power On key;


•  Click Resurrect button;


•  Wait till software signals a successful operation completion;


•  Disconnect power supply, de-solder JTAG wires;

Now phone is in bootable condition, that is, even if it does not
start up normally, you can flash it using known flashing methods.

To enter download mode:

•  Disconnect PC cable;


•  Insert battery;


•  Hold ‘Volume Down’ key and press ‘Power ON’ button.

.

Read More

HTC Droid DNA ADR6435 / Droid Incredible X (HTC DLX) Unbrick, Unlock, IMEI and SuperCID repair supported Repairing bricked HTC Droid DNA (PL8320000) is easy with the RIFF Box.

 Phone is auto powered on with USB Data Cable connected to the PC. Battery presence may be required.

In case you have no USB cable near, make sure battery is charged enough
and hold Power On button during initiation of JTAG connection.

Resurrector will reflash radio’s boot zone and will re-write PDA’s SPL
to 1.33.0001 version. Additionally to SPL and Radio zones, the zone
which contains Model ID may be re-flashed too. In this case after
resurrection the phone will have Model ID = ‘PL8320000’.

To resurrect HTC Droid DNA (PL8320000):

•  Solder JTAG cable to HTC Droid DNA (PL8320000) JTAG pads;


•  Insert USB Data cable into board and PC;


•  Make sure HTC Droid DNA (PL8320000) is selected in the list of models;


•  If you use battery, press Power On key;


•  Click Resurrect button;


•  Wait till software signals a successful operation completion;


•  Disconnect power supply, de-solder JTAG wires;

Now phone is in bootable condition, that is, even if it does not
start up normally, you can flash it using known flashing methods.

To enter download mode:

•  Disconnect PC cable;


•  Insert battery;


•  Hold ‘Volume Down’ key and press ‘Power ON’ button.

.

Read More

Samsung YP-G1CW / YP-G1CB Galaxy S WiFi Unbrick – Dead Boot repair supported Samsung YP-G1 is based on the S5PCxxx Processor (ARM core is Cortex-A8).

Note, one simple way to connect over JTAG – connect USB cable to PC and
insert battery. In this case phone is automatically powered on. But
note, in very rare cases it is possible that you will have to hold Power
On key during initial connection.

To resurrect Samsung YP-G1:

•  Solder JTAG cable to Samsung YP-G1 JTAG pads;


•  Connect microUSB cable to phone and PC;


•  Insert battery;


•  Make sure Samsung YP-G1 is selected in the list of models;


•  Make sure a fixed TCK frequency is selected;


•  Click Resurrect button;


•  Wait till software signals a successful operation completion;


•  Disconnect USB cable, de-solder JTAG wires;

Now phone is in bootable condition, that is, even if it does not
start up normally, you can flash it using original Samsung downloader
software to restore it to the working state.

To enter download mode:

•  Disconnect PC cable;


•  Insert battery;


•  Hold both ‘Volume Down’ and ‘Home’ keys and press Power-On.

.

Read More

Samsung GT-S6810P Galaxy Fame WORLD FIRST Boot repair support ! ! ! Repairing bricked Samsung S6810P is easy with the RIFF Box.

Note, one simple way to connect over JTAG – connect USB cable to PC and
insert battery. In this case phone is automatically powered on, so no
need to press any power-on buttons on the phone keypad.

To resurrect Samsung S6810P:

•  Solder JTAG cable to Samsung S6810P JTAG pads;


•  Insert USB Data cable into board and PC;


•  Make sure Samsung S6810P is selected in the list of models;


•  Click Resurrect button;


•  Wait till software signals a successful operation completion;


•  Disconnect power supply, de-solder JTAG wires;

Now phone is in bootable condition, that is, even if it does not
start up normally, you can flash it using known flashing methods.

To enter download mode:

•  Disconnect PC cable;


•  Insert battery;


•  Hold ‘Volume Down’ and ‘OK’ keys and press Power-On. And after you
  see the warning message press ‘Volume Up’ key to enter Download Mode.

.

Read More

ZTE Skate Acqua (V880) Unbrick -Dead boot repair supported Repairing bricked ZTE V880 is easy with the RIFF Box.

To resurrect ZTE V880:

•  Solder JTAG cable to ZTE V880 JTAG pads;


•  Make sure ZTE V880 is selected in the list of models;


•  Connect USB Data Cable;


•  Click Resurrect button;


•  Wait till software signals a successful operation completion;


•  Disconnect power supply, de-solder JTAG wires;

.

Read More