Samsung GT-S6810P Galaxy Fame WORLD FIRST Boot repair support ! ! ! Repairing bricked Samsung S6810P is easy with the RIFF Box.

Note, one simple way to connect over JTAG – connect USB cable to PC and
insert battery. In this case phone is automatically powered on, so no
need to press any power-on buttons on the phone keypad.

To resurrect Samsung S6810P:

•  Solder JTAG cable to Samsung S6810P JTAG pads;


•  Insert USB Data cable into board and PC;


•  Make sure Samsung S6810P is selected in the list of models;


•  Click Resurrect button;


•  Wait till software signals a successful operation completion;


•  Disconnect power supply, de-solder JTAG wires;

Now phone is in bootable condition, that is, even if it does not
start up normally, you can flash it using known flashing methods.

To enter download mode:

•  Disconnect PC cable;


•  Insert battery;


•  Hold ‘Volume Down’ and ‘OK’ keys and press Power-On. And after you
  see the warning message press ‘Volume Up’ key to enter Download Mode.

.