LG E405 Optimus L3 Dual Unbrick – Dead boot repair supported

Repairing bricked LG E405 with the RIFF Box is very hard because it
requires non-beginner soldering skills (since JTAG pads on board are
very small and are close to each other).

Phone is auto powered on with USB Data Cable connected to the PC.
Battery presence is not required; connection can be established with
detached board.

To resurrect LG E405:

•  Solder JTAG cable to LG E405 JTAG pads;


•  Insert USB Data cable into board and PC;


•  Make sure LG E405 is selected in the list of models;


•  Click Resurrect button;


•  Wait till software signals a successful operation completion;


•  Disconnect power supply, de-solder JTAG wires;

Now phone is in bootable condition, that is, even if it does not
start up normally, you can flash it using known flashing methods

To enter emergency mode:

•  Disconnect PC cable;


•  Insert battery;


•  Hold ‘Volume down’ key and press ‘Power ON’ button.

.