Samsung Gravity 3 SGH-T479 Unbrick – Dead Boot Repair Supported

The Samsung T479 board is auto powered on with USB Data Cable
connected to the PC. Battery presence is not required; connection can be
established with detached board.


To resurrect Samsung T479:

•  Solder JTAG cable to Samsung T479 JTAG pads;


•  Connect USB cable;


•  Make sure Samsung T479 is selected in the list of models;


•  Click Resurrect button;


•  Wait till software signals a successful operation completion;


•  Disconnect power supply, de-solder JTAG wires;

Now phone is in bootable condition, that is, even if it does not
start up normally, you can flash it using known flashing methods.


To enter download mode:

•  Disconnect PC cable;


•  Insert battery;


•  Hold both ‘Volume Up’ and ‘Camera’ keys and press ‘Power ON’ button.

.