Symphony T42 Flash File 100% Ok File

Symphony T42 (MTK-6252)



File Info : 01
WBG1508X_0201_PCB01_GPRS_MT6252_S01.1508X_0201_V15 23.BIN

Project ID : 1508X_0201_V1523

CPU_Type = MT6252

CPU_ID = 00000007

NOR_ID = 002C00CB00180000

NOR_Size =16MB

NOR_Name=SF

Password : ** Ashfaq Tawhid Rayan **

Phone Lock Code : 1379








Info : 02

WBG1508X_0201_PCB01_GPRS_MT6252_S01.1508X_0201_V15 43.BIN

Project ID : 1508X_0201_V1543

CPU_Type = MT6252

CPU_ID = 00000007

NOR_ID = 002C00CB00180000

NOR_Size =16MB

Password : Ashfaq Tawhid (Rayan)

Read More

ZTE F160 Unbrick – Dead Boot repair supported Repairing bricked ZTE F160 is easy with the RIFF Box. Phone is auto powered on with USB Data Cable connected.

To resurrect ZTE F160:

•  Solder JTAG cable to ZTE F160 JTAG pads;


•  Make sure ZTE F160 is selected in the list of models;


•  Connect USB Data Cable;


•  Click Resurrect button;


•  Wait till software signals a successful operation completion;


•  Disconnect power supply, de-solder JTAG wires;

Read More

Haier C2010 Ubrick – Dead Boot repair supported

Resurrecting Haier C2010 is simple. Phone is auto powered on with USB
Cable connected to the PC. Battery presence is not required; connection
can be established with detached board.

Current resurrector contains Firmware and EEPROM zones for memory chip with ID 0×0020/0×8832

To resurrect Haier C2010:

•  Solder JTAG cable to Haier C2010 JTAG pads;


•  Insert USB Data cable into board and PC;


•  Make sure Haier C2010 is selected in the list of models;


•  Click Resurrect button;


•  Choose which areas to flash;


•  Wait till software signals a successful operation completion;


•  De-solder JTAG wires;

.

Read More

AT&T HTC Status (HTC ChaCha PH0613000) Ubrick, Boot, IMEI, SuperCID repair supported Repairing bricked HTC ChaCha (HTC Status) (PH0613000) is easy with the RIFF Box

. Phone is auto powered on with USB Data Cable connected to the PC. Battery presence may be required.

In case you have no USB cable near, make sure battery is charged enough
and hold Power On button during initiation of JTAG connection.

Resurrector will reflash radio’s boot zone and will re-write PDA’s SPL
to 1.13.0000 version. Additionally to SPL and Radio zones, the zone
which contains Model ID is re-flashed too. Thus after resurrection phone
will have Model ID = ‘PH0613000’.

To resurrect HTC ChaCha:

•  Solder JTAG cable to HTC ChaCha (PH0613000) JTAG pads;


•  Insert USB Data cable into board and PC;


•  Make sure HTC ChaCha (PH0613000) is selected in the list of models;


•  If you use battery, press Power On key;


•  Click Resurrect button;


•  Wait till software signals a successful operation completion;


•  Disconnect power supply, de-solder JTAG wires;

Now phone is in bootable condition, that is, even if it does not
start up normally, you can flash it using known flashing methods.

To enter download mode:

•  Disconnect PC cable;


•  Insert battery;


•  Hold ‘Volume Down’ key and press ‘Power ON’ button.

.

Read More

HTC One S PJ401000 Unbrick, Unlock, IMEI, SuperCID repair supported Repairing bricked HTC OneS (PJ4010000) is easy with the RIFF Box.

 Phone is auto powered on with USB Data Cable connected to the PC. Battery presence may be required.

In case you have no USB cable near, make sure battery is charged enough
and hold Power On button during initiation of JTAG connection.

Resurrector will reflash radio’s boot zone and will re-write PDA’s SPL
to 1.06.0000 or 1.13.0000 version. Additionally to SPL and Radio zones,
the zone which contains Model ID is re-flashed too. Thus after
resurrection phone will have Model ID = ‘PJ4010000’.

To resurrect HTC OneS:

•  Solder JTAG cable to HTC OneS JTAG pads;


•  Insert USB Data cable into board and PC;


•  Make sure HTC OneS PJ4010000 is selected in the list of models;


•  If you use battery, press Power On key;


•  Click Resurrect button;


•  Wait till software signals a successful operation completion;


•  Disconnect power supply, de-solder JTAG wires;

Now phone is in bootable condition, that is, even if it does not
start up normally, you can flash it using known flashing methods.

To enter download mode:

•  Disconnect PC cable;


•  Insert battery;


•  Hold ‘Volume Down’ key and press ‘Power ON’ button.

.

Read More

Samsung SHW-M180W Galaxy Tab WiFi Unbrick – Dead Boot repair supported Samsung M180W is based on the S5PCxxx Processor (ARM core is Cortex-A8).

Note, one simple way to connect over JTAG – connect USB cable to PC and
insert battery. In this case phone is automatically powered on. But
note, in some cases it is possible that you will have to hold Power On
key during initial connection.


To resurrect Samsung M180W:

•  Solder JTAG cable to Samsung M180W JTAG pads;


•  Connect USB cable to phone and PC;


•  Attach battery connector;


•  Make sure Samsung M180W is selected in the list of models;


•  Make sure a fixed TCK frequency is selected;


•  Click Resurrect button;


•  Wait till software signals a successful operation completion;


•  Disconnect USB cable, de-solder JTAG wires;

Now phone is in bootable condition, that is, even if it does not
start up normally, you can flash it using original Samsung downloader
software to restore it to the working state.


To enter download mode:

•  Disconnect PC cable;


•  Insert battery;


•  Hold both ‘Volume Down’ and ‘Home’ keys and press Power-On.

.

Read More

Samsung SHW-M200s Nexus S Unbrick – Dead Boot repair supported Repairing bricked Samsung M200S is easy with the RIFF Box.

The phone is based on the S5PCxxx Processor (ARM core is Cortex-A8).

Note, one simple way to connect over JTAG – connect USB cable to PC and
insert battery. In this case phone is automatically powered on. But
note, in very rare cases it is possible that you will have to hold Power
On key during initial connection.

To resurrect Samsung M200S:

•  Solder JTAG cable to Samsung M200S JTAG pads;


•  Connect microUSB cable to phone and PC;


•  Insert battery;


•  Make sure Samsung M200S is selected in the list of models;


•  Make sure a fixed TCK frequency is selected;


•  Click Resurrect button;


•  Wait till software signals a successful operation completion;


•  Disconnect USB cable, de-solder JTAG wires;

Now phone is in bootable condition, that is, even if it does not
start up normally, you can flash it using original Samsung downloader
software to restore it to the working state.

To enter download mode:

•  Disconnect PC cable;


•  Insert battery;


•  Hold both ‘Volume Down’ and ‘Home’ keys and press Power-On.

.

Read More