Haier C2010 Ubrick – Dead Boot repair supported

Resurrecting Haier C2010 is simple. Phone is auto powered on with USB
Cable connected to the PC. Battery presence is not required; connection
can be established with detached board.

Current resurrector contains Firmware and EEPROM zones for memory chip with ID 0×0020/0×8832

To resurrect Haier C2010:

•  Solder JTAG cable to Haier C2010 JTAG pads;


•  Insert USB Data cable into board and PC;


•  Make sure Haier C2010 is selected in the list of models;


•  Click Resurrect button;


•  Choose which areas to flash;


•  Wait till software signals a successful operation completion;


•  De-solder JTAG wires;

.