MKEY V8.0.9 BUILD 08.MARCH.2013

Read More

Samsung Gravity 3 SGH-T479 Unbrick – Dead Boot Repair Supported

The Samsung T479 board is auto powered on with USB Data Cable
connected to the PC. Battery presence is not required; connection can be
established with detached board.


To resurrect Samsung T479:

•  Solder JTAG cable to Samsung T479 JTAG pads;


•  Connect USB cable;


•  Make sure Samsung T479 is selected in the list of models;


•  Click Resurrect button;


•  Wait till software signals a successful operation completion;


•  Disconnect power supply, de-solder JTAG wires;

Now phone is in bootable condition, that is, even if it does not
start up normally, you can flash it using known flashing methods.


To enter download mode:

•  Disconnect PC cable;


•  Insert battery;


•  Hold both ‘Volume Up’ and ‘Camera’ keys and press ‘Power ON’ button.

.

Read More

HTC Amaze 4G (HTC Ruby) Unbrick – Dead Boot Repair Supported Repairing bricked HTC Amaze4G is easy with the RIFF Box.

 Phone is auto powered on with USB Data Cable connected to the PC while battery is connected.

Resurrector will reflash radio’s boot zone and will re-write PDA’s HBOOT
version 1.90.0008. Additionally to SPL and Radio zones, the zone which
contains Model ID is re-flashed too. Thus after resurrection phone will
have Model ID = ‘PH8511000’.

There is option to reflash BOOT and RECOVERY zones.

To resurrect HTC Amaze4G:

•  Solder JTAG cable to HTC Amaze4G JTAG pads;


•  Insert batter and connect USB Data cable;


•  Make sure HTC Amaze4G is selected in the list of models;


•  If you use only battery, press Power On key;


•  Click Resurrect button;


•  Wait till software signals a successful operation completion;


•  Disconnect power supply, de-solder JTAG wires;

Now phone is in bootable condition, that is, even if it does not
start up normally you can flash it using known flashing methods.

To enter download mode:

•  Disconnect PC cable;


•  Insert battery;


•  Hold ‘Volume Down’ key and press ‘Power ON’ button.

.

Read More

Huawei Boulder U8350/U8350-51 Unbrick – Dead Boot Repair Supported Repairing bricked Huawei U8350 is easy with the RIFF Box.

To resurrect Huawei U8350:

•  Solder JTAG cable to Huawei U8350 JTAG pads;


•  Connect Huawei U8350 tablet’s charger for power;


•  Make sure Huawei U8350 is selected in the list of models;


•  Click Resurrect button;


•  Wait till software signals a successful operation completion;


•  De-solder JTAG wires;

Now device is in bootable condition, that is, even if it does not
start up normally, you can flash it using known flashing methods.

.

Read More

HTC One S Z560E (HTC Ville C) Unbrick – Dead Boot Repair Supported Repairing bricked HTC OneS is easy with the RIFF Box.

 Phone is auto powered on with USB Data Cable connected to the PC. Battery presence may be required.

In case you have no USB cable near, make sure battery is charged enough
and hold Power On button during initiation of JTAG connection.

Resurrector will reflash radio’s boot zone and will re-write PDA’s SPL
to 2.09.0001 version. Additionally to SPL and Radio zones, the zone
which contains Model ID is re-flashed too. Thus after resurrection phone
will have Model ID = ‘PJ4020000’.


To resurrect HTC OneS:

•  Solder JTAG cable to HTC OneS JTAG pads;


•  Insert USB Data cable into board and PC;


•  Make sure HTC OneS is selected in the list of models;


•  If you use battery, press Power On key;


•  Click Resurrect button;


•  Wait till software signals a successful operation completion;


•  Disconnect power supply, de-solder JTAG wires;

Now phone is in bootable condition, that is, even if it does not
start up normally, you can flash it using known flashing methods.


To enter download mode:

•  Disconnect PC cable;


•  Insert battery;


•  Hold ‘Volume Down’ key and press ‘Power ON’ button.

.

Read More

Samsung SGH-Z710 Unbrick – Dead Boot Repair Supported Repairing bricked Samsung Z710 is easy with the RIFF Box.

To resurrect Samsung Z710:

•  Solder JTAG cable to Samsung Z710 JTAG pads;


•  Connect USB cable or instert batteryu;


•  Make sure Samsung Z710 is selected in the list of models;


•  Click Resurrect button;


•  Wait till software signals a successful operation completion;


•  Disconnect power supply, de-solder JTAG wires;

Now phone is in bootable condition, that is, even if it does not
start up normally, you can flash it using known flashing methods.


To enter download mode:

•  Disconnect PC cable;


•  Insert battery;


•  Hold ‘9’ key and press ‘Power ON’ button.

.

Read More

ZTE N721 Unbrick – Dead Boot Repair Supported

Repairing bricked ZTE N721 is easy with the RIFF Box.


To resurrect ZTE N721:

•  Solder JTAG cable to ZTE N721 JTAG pads;


•  Connect ZTE N721 tablet’s charger for power;


•  Make sure ZTE N721 is selected in the list of models;


•  Click Resurrect button;


•  Wait till software signals a successful operation completion;


•  De-solder JTAG wires;

Now device is in bootable condition, that is, even if it does not
start up normally, you can flash it using known flashing methods.

.

Read More