LG E975W Optimus GJ (LG Gee B) Unbrick – dead boot repair supported

Repairing
bricked LG E975W with the RIFF Box requires non-beginner soldering
skills (since JTAG pads on board are very small and are close to each
other).
Phone is auto powered on with USB Data Cable connected to
the PC while battery is inserted. Please note, battery must be charged.
If battery is not charged enough there is chance of getting 0×42 error
during connection stage.

To resurrect LG E975W:

•  Solder JTAG cable to LG E975W JTAG pads;


•  Insert USB Data cable into board and PC;


•  Make sure LG E975W is selected in the list of models;


•  Click Resurrect button;


•  Wait till software signals a successful operation completion;


•  Disconnect power supply, de-solder JTAG wires;

Now
phone is in bootable condition, that is, even if it does not start up
normally, you can flash it using known flashing methods

To enter emergency mode:

•  Disconnect PC cable;


•  Insert battery;


•  Hold both ‘Volume down’ and ‘Camera’ keys and press ‘Power ON’ button.

.

Read More

HTC T329w (HTC Proto) Unbrick – SuperCID – IMEI repair supported

Repairing
bricked HTC Proto (PM6610000) is easy with the RIFF Box. Phone is auto
powered on with USB Data Cable connected to the PC. Battery presence may
be required.
In case you have no USB cable near, make sure battery
is charged enough and hold Power On button during initiation of JTAG
connection.
Resurrector will reflash radio’s boot zone and will
re-write PDA’s SPL to 1.12.0002 version. Additionally to SPL and Radio
zones, the zone which contains Model ID may be re-flashed too. In this
case after resurrection the phone will have Model ID = ‘PM661****’.

To resurrect HTC Proto (PM6610000):

•  Solder JTAG cable to HTC Proto (PM6610000) JTAG pads;


•  Insert USB Data cable into board and PC;


•  Make sure HTC Proto (PM6610000) is selected in the list of models;


•  If you use battery, press Power On key;


•  Click Resurrect button;


•  Wait till software signals a successful operation completion;


•  Disconnect power supply, de-solder JTAG wires;

Now
phone is in bootable condition, that is, even if it does not start up
normally, you can flash it using known flashing methods.

To enter download mode:

•  Disconnect PC cable;


•  Insert battery;


•  Hold ‘Volume Down’ key and press ‘Power ON’ button.

.

Read More

Asus Padfone 2 A68 Unbrick – dead boot repair supported

Repairing
bricked Asus Padfone A68 is easy with the RIFF Box. Phone is auto
powered on with USB Data Cable connected to the PC. Battery presence may
be required.
In case you have no USB cable near, make sure battery
is charged enough and hold Power On button during initiation of JTAG
connection.

To resurrect Asus Padfone A68:

•  Solder JTAG cable to Asus Padfone A68 JTAG pads;


•  Insert USB Data cable into board and PC;


•  Make sure Asus Padfone A68 is selected in the list of models;


•  If you use battery, press Power On key;


•  Click Resurrect button;


•  Wait till software signals a successful operation completion;


•  Disconnect power supply, de-solder JTAG wires;

.

Read More

Asus Padfone Infinity A80 Unbrick – dead boot repair supported

Repairing
bricked Asus Padfone A80 is easy with the RIFF Box. Phone is auto
powered on with USB Data Cable connected to the PC. Battery presence may
be required.
In case you have no USB cable near, make sure battery
is charged enough and hold Power On button during initiation of JTAG
connection.

To resurrect Asus Padfone A80:

•  Solder JTAG cable to Asus Padfone A80 JTAG pads;


•  Insert USB Data cable into board and PC;


•  Make sure Asus Padfone A80 is selected in the list of models;


•  If you use battery, press Power On key;


•  Click Resurrect button;


•  Wait till software signals a successful operation completion;


•  Disconnect power supply, de-solder JTAG wires;

.

Read More

Easy repair LG VS840 Lucid 4G (LG Cayman) supported

RIFF JTAG – Easy repair LG VS840 Lucid 4G (LG Cayman) supported

Repairing bricked LG VS840 is easy with the RIFF Box.

Note, one simple way to connect over JTAG – connect USB cable to PC and
insert battery. In this case phone is automatically powered on.

To resurrect LG VS840:

•  Solder JTAG cable to LG VS840 JTAG pads;


•  Connect USB cable to phone and PC;


•  Insert battery;


•  Make sure LG VS840 is selected in the list of models;


•  Click Resurrect button;


•  Wait till software signals a successful operation completion;


•  Disconnect USB cable, de-solder JTAG wires;

Now
phone is in bootable condition, that is, even if it does not start up
normally, you can flash it using original LG downloader software to
restore it to the working state.

To enter download mode:

•  Disconnect PC cable;


•  Insert battery;


•  Hold ‘Volume Down’ key and press Power-On.

.

Read More

Easy repair Pantech Vega Iron IM-A870L supported Repairing bricked Pantech A870L is easy with the RIFF Box. To resurrect Pantech A870L:

•  Solder JTAG cable to Pantech A870L JTAG pads;


•  Insert Pantech A870L into any USB port for power;


•  Make sure Pantech A870L is selected in the list of models;


•  Click Resurrect button;


•  Select areas to be repaired in the settings window;


•  Wait till software signals a successful operation completion;


•  De-solder JTAG wires;

.

Read More

RIFF JTAG – Easy repair LG P715 Optimus L7 II Dual supported

Repairing
bricked LG P715 is easy with the RIFF Box. But it requires non-beginner
soldering skills (since JTAG pads on board are very small and are close
to each other).

To resurrect LG P715:

•  Solder JTAG cable to LG P715 JTAG pads;


•  Insert USB Data cable into board and PC;


•  Make sure LG P715 is selected in the list of models;


•  Click Resurrect button;


•  Wait till software signals a successful operation completion;


•  Disconnect power supply, de-solder JTAG wires;

Now
phone is in bootable condition, that is, even if it does not start up
normally, you can flash it using known flashing methods.
.

Read More