Android Mobile Doctor

SAGETEL T11i

PROBLEM

IMIE & PHONE LOCK

TOOLS

MICRO USB CABLE

PIRANHA BOX

CHECK UNLOCK CODE CLICK START BUTTON

INSERT USB CABLE TO PHONE

REPAIR IMIE OK

EASY COMPARE TO OTHER CHINESE TOOL

World's 1st

ALL MTK 65xx

ALL Android 4.x.x

Invalid Imei repair

Imei NULL repair
1 - !!!! Imei repair with META mode Supported !!!!
No Root

No Flash

No hassle

Just one Click
how to repair imei ?
go to MTK TAB

do Enable imei

click on Android tool

click on Run

click on MTK 65xx New Method

Fill imei in boxes

click on Write imei

when software saying searching for port

Insert Usb cable to phone in powered OFF condition !!

waiting software for process complete

after 2 secs your imei repair

Possible problems :
You Drivers are conflicting

You Drivers port are High like 50~200

You didn't install 2nd time drivers

your 1st time drivers com port is ok but 2nd time drivers com port is high

Wrong Drivers installed

Windows problem
some test reports VolcanoBox Ver 2.0.0 world's 1st mt65xx 4.x.x imei repaired success BETA TEST REPORTS

Make sure you have Clean pc and Drivers are conflicting.
2 - Detailed VolcanoBox manual updated

Run Volcanobox

Click on Manual Help

Read Detailed volcanobox

Special Thanks to Dipendra Pathak
3 - Adjust MTK Android EMMC flash read, write separate file and get ROOT permission.

4 - Solve some Coolsand phone dead problems after Write flash.

5 - Add 6530 new flash ic supported.

6 - Now we can add any 6530 Unsupported Flash ic. Just
send me pm Picture of Flash ic and screen shot of error on volcano. we
will add those unsupported flash ic in next upcoming updates.
click here to download

About Dead Coolsand phones which can't write & can't format !!

Question.

Coolsand CPU can't write can't format Stop on Boot downloading?

Answer.

Mostly coolsand CPU heat up when you try to format or write flash file

its Stop on Boot downloading.

Connect phone with VolcanoBox Click on EagleEye -> Click on Collect. Press and hold mobile power button.

Same Like this its Hardware problem change mobile CPU.

Some Coolsand Dead phone take 20-25mA

can't write can't format Stop on Boot downloading

like this

Coolsand Dead Phone Stop on Boot downloading its hardware problem Not Software or Not Boot Dead.

if any Working Phone can't write , can't format its Stop on Boot downloading.

Select Correct Flash type Manually then Do, Format, Write Flash, imei Change.

RDA 8853A CPU ID: is 880A 7002

RDA 8851A CPU ID: is 8809 4005

CT8853A CPU ID: is 8808 7000

RDA 8851E CPU ID: is 8809 4005

CT1130/1131 CPU ID: is 8806

CT1129D CPU ID: is 8808

See this

Read info

Read Flash

Format

Write Flash

Samsung CDMA F309 Unlocking Success

Com port Cable Use in Infinity....

Open Infinity Samsung platform

Go to Service

click SP Lock

done........

COM5 [Serial2] selected

module v1.11

Device: Samsung-SCH-S269

Checking data, wait...

Action: unlock

Phone should be Switched ON !

Connecting, wait...

Phone detected, wait...

step-1 done

step-2 done

step-3 done

operation finished

Finished, time used: 13 sec

Remove/Install battery now !

VolcanoBox 2.0.1 Nokia 112 (8MB) Coolsand Success Read/Write Flash

which failed on 2.0.0

this is beta testing for get beta ver please contact with Faisal_Computer

Read Flash

Write Flash

Octopus Box Samsung Software v1.8.6

- Added support for the following models:

SC-01E - added Direct Unlock, Read Codes, Write Firmware, Read/Write NVM.
SGH-I437 - added Direct Unlock, Read Codes, Write Firmware, Read/Write NVM.
GT-S7530 - added Direct Unlock, Read Codes, Repair IMEI, Read/Write/Repair NVM.
GT-E1210 - added Read Codes, Write Firmware, Repair IMEI, Read Full Flash, Read EEPROM.
GT-E1210S - added Read Codes, Write Firmware, Repair IMEI, Read Full Flash, Read EEPROM.
GT-E1220 - added Read Codes, Write Firmware, Repair IMEI, Read Full Flash, Read EEPROM.
GT-E1220T - added Read Codes, Write Firmware, Repair IMEI, Read Full Flash, Read EEPROM
(thanks to Mr. FAFO3).
SGH-I717 - added Repair IMEI.
SGH-I717D - added Repair IMEI.
SGH-I717M - added Repair IMEI.
SGH-I717R - added Repair IMEI.
SGH-I757M - added Repair IMEI.
- Added Software manuals for supported phones.
- Released some improvements to the main software.

We continue building up one of the biggest lists of supported phones
with 600+ Samsung mobile devices up to date.

Download Octopus Box Samsung Software v1.8.6

Added world's first support for LG E975R and LG S360!

Octopus Box LG Software v2.4.5

- Added support for the following models:

LG E975R - added world's first Direct Unlock, Write Firmware, Repair Security, Repair IMEI,
Repair BT Address, Write Security Backup, Read/Write/Repair NVM, Read Full Flash (Dump NAND).
LG S360 - added Direct Unlock, Write Firmware, Repair IMEI (A/B), Repair BT Address,
Read/Write/Repair EEPROM, Read Full Flash.
- Added software manuals for supported phones.
- Released some improvements to the main software.

Only world's first, only the best solutions for your business - it's all Octopus!

Download Octopus Box LG Software v2.4.5

Sigma Software v1.21.01
& Sigma Firmware v1.23

Today we'd like to give you quite an unique servicing solution for a wide range
of MT6251 based Alcatel phones. This time it's a world's first Direct Unlock feature that
(unlike other solutions) actually works with all the supported models.
Up to date it's the most complete and efficient servicing solution on the market!
And there’re much more...

Release Notes:

MTK Platform Updates

1. Following servicing options were added:
- World's first REAL Direct Unlock
- Read Unlock Codes
- Unlock Code Calculation via IMEI and PID
- Read User Code
- Format FFS
- Write Flash
- Read / Write backup
- Phone book backup

for the supported phones:
Alcatel:
OT-112, OT-117, OT-132
OT-2117, OT-217, OT-217D, OT-228, OT-228D,
OT-232, OT-233, OT-262, OT-292, OT-296, OT-297
SFR 101 / OT-F101
TCL-T268 / OT-T268

ZTE:
(these models added in the test mode):
Coral 268, Coral 558
Movistar Onda
S505, S511, S516, S518

Competitive advantages of the solution:
- Totally new to the market and the most effective solution for this group of phones -
forget about other raw solutions you’ve been using!
- Direct unlock actually unlocks the phone, no matter what PID, security type, hardware or firmware versions it has.
- Real unlocking solution for phones which you weren’t able to unlock with other tools.
- Wider range of phones supported for direct unlock and servicing!
- All the tools you'll ever need for phone servicing.
- No need to wait for new updates and the most recent PIDs - everything's supported out of the box!

Check unlocking manual and pinout for these models.
SigmaBox owners may use this cable (included in the box package)
to solder to the phone's board according to the pinout.

2. Following MTK-based smartphone was added to the list
of supported for Direct Unlock / Get Unlock Codes:
ZTE Mimosa Mini (MT6573)

3. First in the World ZTE-G R621 (MT6252) phone model was added for unlock purposes via patching.

QUALCOMM platform updates:

New firmware version supported for the fast direct unlock added:
Movistar Chat+ : MVL_VE_P671A70V1.0.1B02-S

BROADCOM Platform Updates

Corrected unlock process for Alcatel OT-906Y

Want to unlock even more models?
We'd like to buy a range of currently unsupported models. Check the list of them here.

Download Sigma Software v1.21.01

EasyJTAG Suite Version 1.0.16.0 Are ready for testers

Added

Samsung GT-S5250 full repair support ( Read / Write / Easy Repair)

Samsung GT-i9001 full repair support ( Read / Write / Easy Repair)

Samsung GT-S5660 full repair support ( Read / Write / Easy Repair)

Fixed software chash when reading unstable eMMC target

Updated Drivers package

Improved EMMC Support

Hello, this is what we've done:

New Models:

RIFF JTAG - HTC Windows Phone 8X (HTC Accord) Unbrick, Dead boot IMEI repair supported | RIFF Box - JTAG Revolution

RIFF JTAG - NTT DoCoMo Samsung Galaxy S III LTE SC-06D Unbrick - Dead boot repair supported | RIFF Box - JTAG Revolution

HTC EVO Design 4G PH4430(HTC Kingdom) Unbrick, Unlock, IMEI, SuperCID repair supported | RIFF Box - JTAG Revolution

RIFF JTAG ? LG E405 Optimus L3 Dual Unbrick ? Dead boot repair supported | RIFF Box - JTAG Revolution

RIFF JTAG - LG E615 Optimus L5 Dual Unbrick - Dead boot repair supported | RIFF Box - JTAG Revolution

RIFF JTAG - Samsung GT-i8190 Galaxy S III Mini Unbrick - Dead boot repair supported | RIFF Box - JTAG Revolution

RIFF JTAG - Samsung SHW-M200K NEXUS S Unbrick - Dead boot repair supported | RIFF Box - JTAG Revolution

RIFF JTAG - Pantech Vega R3 IM-A850S Unbrick - Dead boot repair supported | RIFF Box - JTAG Revolution

RIFF JTAG ? ZTE Skate Unbrick ? Dead boot repair supported | RIFF Box - JTAG Revolution

Bug fixes/Updates:

Alcatel_OT995.dll

-------------------------------------

- suport of less than 2GB eMMC chips is improved

RIFF Torrent tracker:

RiffBox_Setup_29.03.2013_v1.torrent

Android_Gadget_CDC_driver

Installation:

1. Please update Microsoft Hotfix KB943198 for windows XP;

2. It is better to update your windows XP to SP3;

2. Then install ACM driver using Android_Gadget_CDC_driver

Hotfix KB943198 in side driver folder
Android_Gadget_CDC_driver.rar

SmartSambox - Multi Flashing & unlocking Service tool for Samsung Phones.

HOT UPDATE

WORLD FIRST

Whats New

+ GT-S6812 - Direct Unlock,Read Codes， Write Flash, Repair Imei - Multi Flashing/Unlocking

+ GT-S6810 - Direct Unlock,Read Codes， Write Flash, Repair Imei - Multi Flashing/Unlocking

+ GT-S6810P- Direct Unlock,Read Codes， Write Flash, Repair Imei - Multi Flashing/Unlocking

+ GT-I9082 - Direct Unlock,Read Codes， Write Flash, Repair Imei - Multi Flashing/Unlocking

+ GT-I9082L- Direct Unlock,Read Codes， Write Flash, Repair Imei - Multi Flashing/Unlocking

+ GT-I9105 - Direct Unlock,Read Codes， Write Flash, Repair Imei - Multi Flashing/Unlocking

+ GT-I9105P- Direct Unlock,Read Codes， Write Flash, Repair Imei - Multi Flashing/Unlocking

+ GT-E2220 - Direct Unlock,Read Codes, Write Flash, Repair Imei - Multi Flashing/Unlocking

+ GT-E2252 - Direct Unlock,Read Codes, Repair Imei - Multi Unlocking

Download Link

Download From SmartGsm Server

Download Hotfile Account

What is Multi Flashing/ Unlocking

Samsung 4 + Many Phones Easy Flashing & Unlocking @ Same time ! Just Watch Video

Repairing bricked Samsung SC-06D is easy with the RIFF Box. The device is based on the Qualcomm MSM8960 chipset.

Note, one simple way to connect over JTAG – connect USB cable to PC and
insert battery. In this case phone is automatically powered on.

To resurrect Samsung SC-06D:

Solder JTAG cable to Samsung SC-06D JTAG pads;

Connect USB cable to phone and PC;

Insert battery;

Make sure Samsung SC-06D is selected in the list of models;

Click Resurrect button;

Wait till software signals a successful operation completion;

Disconnect USB cable, de-solder JTAG wires;

Now phone is in bootable condition, that is, even if it does not
start up normally, you can flash it using original Samsung downloader
software to restore it to the working state.

To enter download mode:

Disconnect PC cable;

Insert battery;

Hold ‘Volume Down’ key and press Power-On.

Phone is auto powered on with USB Data Cable connected to the PC while battery is connected.

Additionally to SPL and Radio zones, the zone which contains Model ID is
re-flashed too. Thus after resurrection phone will have Model ID =
‘PM2330000’.

To resurrect HTC 8X (PM2330000):

Solder JTAG cable to HTC 8X (PM2330000) JTAG pads;

Insert batter and connect USB Data cable;

Make sure HTC 8X (PM2330000) is selected in the list of models;

If you use only battery, press Power On key;

Click Resurrect button;

Wait till software signals a successful operation completion;

Disconnect power supply, de-solder JTAG wires;

Now phone is in bootable condition, that is, even if it does not
start up normally you can flash it using known flashing methods.

To enter download mode:

Disconnect PC cable;

Insert battery;

Hold ‘Volume Down’ key and press ‘Power ON’ button.

.

Repairing bricked LG E405 with the RIFF Box is very hard because it
requires non-beginner soldering skills (since JTAG pads on board are
very small and are close to each other).

Phone is auto powered on with USB Data Cable connected to the PC.
Battery presence is not required; connection can be established with
detached board.

To resurrect LG E405:

Solder JTAG cable to LG E405 JTAG pads;

Insert USB Data cable into board and PC;

Make sure LG E405 is selected in the list of models;

Click Resurrect button;

Wait till software signals a successful operation completion;

Disconnect power supply, de-solder JTAG wires;

Now phone is in bootable condition, that is, even if it does not
start up normally, you can flash it using known flashing methods

To enter emergency mode:

Disconnect PC cable;

Insert battery;

Hold ‘Volume down’ key and press ‘Power ON’ button.

.

Phone is auto powered on with USB Data Cable connected to the PC while battery is connected.

Current resurrector works via USB interface thus no JTAG connection is
required. You may need to install RIFF BOX DCC Loader USB Interface USB
driver if you run this for the first time. Drivers are located in JTAG
Manager directory (Drivers folder).

In order to connect, device must be detected by system as Qualcomm
HS-USB QDLoader communication port. To force device into this mode (that
is if your device is dead but there is still no USB activity when you
connect it to PC with USB cable) use testpoint to disable the eMMC
memory – for this shortcut specified point on the schematics to the GND
during power-on stage.

Resurrector will reflash radio’s boot zones and will re-write PDA’s SPL
to 1.30.0000 version. Additionally to SPL and Radio zones, the zone
which contains Model ID is re-flashed too. Thus after resurrection phone
will have Model ID = ‘PH4430000’.

There is option to reflash BOOT and RECOVERY zones.

To resurrect HTC EvoDesign4G via USB Cable:

If required, use testpoint to force HS-USB QDLoader mode: for this
de-power board, shortcut specified point in the schematics to GND with
the help of a needle, insert USB cable into PC, wait while phone
enumerates as HS-USB QDLoader and then remove the needle;

Make sure USB cable is attached to the board and is connected to PC;

Make sure HTC EvoDesign4G via USB is selected in the list of models;

Click Resurrect button;

Wait till software signals a successful operation completion;

Disconnect power supply, de-solder JTAG wires;

Now phone is in bootable condition, that is, even if it does not
start up normally you can flash it using known flashing methods.

To enter download mode:

Disconnect PC cable;

Insert battery;

Hold ‘Volume Down’ key and press ‘Power ON’ button.

.

Repairing bricked LG E615 with the RIFF Box is very hard because it
requires non-beginner soldering skills (since JTAG pads on board are
very small and are close to each other).

Phone is auto powered on with USB Data Cable connected to the PC.
Battery presence is not required; connection can be established with
detached board.

To resurrect LG E615:

Solder JTAG cable to LG E615 JTAG pads;

Insert USB Data cable into board and PC;

Make sure LG E615 is selected in the list of models;

Click Resurrect button;

Wait till software signals a successful operation completion;

Disconnect power supply, de-solder JTAG wires;

Now phone is in bootable condition, that is, even if it does not
start up normally, you can flash it using known flashing methods

To enter emergency mode:

Disconnect PC cable;

Insert battery;

Hold ‘Volume down’ key and press ‘Power ON’ button.

.

Please note, USB cable must be either disconnected or connected to PC.
Charger is not allowed. In order to establish connection, insert battery
and press Power On.

Problem to establish JTAG connection means the device is dead up to the
loader which enables JTAG. In this case phone must be detected via USB
cable as “U8500 USB ROM”. Please install drivers which are located in
JTAG Manager “Drivers\NTU8500” folder, leave USB cable connected and
start resurrection again.

To resurrect Samsung I8190:

Solder JTAG cable to Samsung I8190 JTAG pads;

Attach battery and connect USB cable;

Make sure Samsung I8190 is selected in the list of models;

Click Resurrect button;

If required, press Power On key;

Wait till software signals a successful operation completion;

Disconnect power supply, de-solder JTAG wires;

Now phone is in bootable condition, that is, even if it does not
start up normally, you can flash it using known flashing methods.

To enter download mode:

Disconnect PC cable;

Insert battery;

Hold ‘Volume Down’ and ‘Home’ keys and press Power-On.

.

The phone is based on the S5PCxxx Processor (ARM core is Cortex-A8).

Note, one simple way to connect over JTAG – connect USB cable to PC and
insert battery. In this case phone is automatically powered on. But
note, in very rare cases it is possible that you will have to hold Power
On key during initial connection.

To resurrect Samsung M200K:

Solder JTAG cable to Samsung M200K JTAG pads;

Connect microUSB cable to phone and PC;

Insert battery;

Make sure Samsung M200K is selected in the list of models;

Make sure a fixed TCK frequency is selected;

Click Resurrect button;

Wait till software signals a successful operation completion;

Disconnect USB cable, de-solder JTAG wires;

Now phone is in bootable condition, that is, even if it does not
start up normally, you can flash it using original Samsung downloader
software to restore it to the working state.

To enter download mode:

Disconnect PC cable;

Insert battery;

Hold both ‘Volume Down’ and ‘Home’ keys and press Power-On.

To resurrect Pantech A850S:

Solder JTAG cable to Pantech A850S JTAG pads;

Insert Pantech A850S into any USB port for power;

Make sure Pantech A850S is selected in the list of models;

Click Resurrect button;

Select areas to be repaired in the settings window;

Wait till software signals a successful operation completion;

De-solder JTAG wires;

To enter download mode:

Disconnect PC cable;

Insert battery;

Hold both ‘Volume Up’ and ‘Volume Down’ keys and press Power-On.
After phone has entered Boot menu, select ‘PDL Download’ to set Software
Upgrading Mode.

.

ZTE Skate Unbrick -Dead boot repair supported

Repairing bricked ZTE SKATE is easy with the RIFF Box.

To resurrect ZTE SKATE:

Solder JTAG cable to ZTE SKATE JTAG pads;

Connect ZTE SKATE tablet’s charger for power;

Make sure ZTE SKATE is selected in the list of models;

Click Resurrect button;

Wait till software signals a successful operation completion;

De-solder JTAG wires;

Now device is in bootable condition, that is, even if it does not
start up normally, you can flash it using known flashing methods.

.

Piranhabox – Most Ferocious Chinese Phones Service Tool☺

What's New

+ Piranhabox: V1.20

+ MTK - MT65xx to modify the default boot

+ MTK - MT6573 Add new flash models support read and write

+ MTK - MT6575 Add new flash models support read and write

+ SPD & WT - Add new flash read/write for support

+ Mstar & W - Add new flash read/write for support

+ Coolsand & RDA - Add NV read/write

+ Coolsand & RDA - Add new flash models support read and write

Download link 1 Win rar format
http://support.smart-gsm.net/index.p...Piranha%20box/

TOOLS

MICRO USB CABLE LIKE NOKIA 5130

SELECT READ FIRTS

CHECK USB MODE

CLICK START BUTTON

CONNECT USB CABLE TO PHONE

INSTALL DRIVER

FORMAT

FLASHING COMPLATE

UNLOCK FILE

thats the difference piranha box compare to other chinese tools

ALL MTK DRIVER

DRIVER OPREK ALL MTKANDROID BY ASHAKAAS.rar

mtk debug usb 32 and 64
mtk debug usb 32 and 64 umesh gaba.rar

SPD ANDROID DRIVER

spd SCI-android-usb-driver-jungo-v4 gaba mobile.rar Attached Files

Android_Gadget_CDC_driver.rar (1.9 KB, 95 views)

meta driver.rar (14.3 KB, 88 views)

mtk_sp_usb2ser.rar (1.8 KB, 80 views)

MICROMAX A30-dual SIM driver-BRCM-PC-USB-Driver-v1.8.6.28(CATFiles).rar (67.3 KB, 132 views)

Tethering_RNDIS.rar (1.6 KB, 76 views)

Android Mobile Doctor

Sunday, 31 March 2013

IPHONE 4 CLONE MT6253 HANG UP SOLVED BY PIRANHABOX

SAGETEL T11i IMIE PHONE LOCK ALL DONE VIA USB CABLE

VolcanoBox2.0.0 World's 1st MTK6575 6577 6573 6589 6515 Andrid 4.x.x Imei repair META

Volcano Box Successfully Unlocked / Repaired / Flashed Phones !!!

Coolsand Dead Phones & Working phone Stop on Boot downloading!!

VolcanoBox 2.0.1World First G,Five P39(SPD 6530)Read,Write,Format only on Volcano box

Saturday, 30 March 2013

Samsung CDMA F309 Unlocking Success

Beta Test Start VolcanoBox 2.0.1 Success Nokia 112 (8MB) Read/Write on Volcano Box

Octopus Box Samsung v1.8.6 - SC01E, I437, S7530, E1210, E1220 and many more!

Octopus Box LG v2.4.5 - LG S360, E975R

Sigma v1.21.01 - Finally Real Direct unlock & Full servicing for models on MT6251!

EasyJTAG Suite Version 1.0.16 Internal Update Build

RIFF JTAG - Week updates summary

Mtk Andriod Driver For Imei Repair

SmartSambox V0300 Hottie & World First Update ,Galaxy Grand,fame,PlusII,Metro,Chat...

Friday, 29 March 2013

NTT DoCoMo Samsung Galaxy S III LTE SC-06D Unbrick – Dead boot repair supported

HTC Windows Phone 8X (HTC Accord) Unbrick, Dead boot IMEI repair supported Repairing bricked HTC 8X (PM2330000) is easy with the RIFF Box.

LG E405 Optimus L3 Dual Unbrick – Dead boot repair supported

HTC EVO Design 4G PH4430(HTC Kingdom) Unbrick, Unlock, IMEI, SuperCID repair supported Repairing bricked HTC EvoDesign4G is easy with the RIFF Box.

LG E615 Optimus L5 Dual Unbrick – Dead boot repair supported

Samsung GT-i8190 Galaxy S III Mini Unbrick – Dead boot repair supported Repairing bricked Samsung I8190 is easy with the RIFF Box.

Samsung SHW-M200K NEXUS S Unbrick – Dead boot repair supported Repairing bricked Samsung M200K is easy with the RIFF Box.

Pantech Vega R3 IM-A850S Unbrick – Dead boot repair supported Repairing bricked Pantech A850S is easy with the RIFF Box.

ZTE Skate Unbrick -Dead boot repair supported Repairing bricked ZTE SKATE is easy with the RIFF Box.

Piranhabox V1.20 Just Another Hot update MTK 6573, 6575, Coolsand , Mstar, SPD & More

S5360 Spd 6803 Read Write Format Unlock File All Doon Via Usb Cable

ALL SPD, MTK,BRCM,Qcom ANDROID DRIVER

Our Readers

Followers

Blog Archive

ClickSor

Android Mobile

Android Mobile

About Android Mobile