Samsung GT-i9152 Galaxy Mega 5.8 Unbrick Total Repair supported

Samsung I9152 is based on the Broadcom BCM28145 Processor (Cortex-A9
Dual-Core). JTAG pads are very small; professional experience in
soldering is required to connect wires to the JTAG interface.

Note, one simple way to connect over JTAG – connect USB cable to PC and
insert battery. In this case phone is automatically powered on.


To resurrect Samsung I9152:

•  Solder JTAG cable to Samsung I9152 JTAG pads;


•  Connect USB cable to phone and PC;


•  Insert battery;


•  Make sure Samsung I9152 is selected in the list of models;


•  Make sure a fixed TCK frequency is selected;


•  Click Resurrect button;


•  Wait till software signals a successful operation completion;


•  Disconnect USB cable, de-solder JTAG wires;

Now phone is in bootable condition, that is, even if it does not
start up normally, you can flash it using original Samsung downloader
software to restore it to the working state.


To enter download mode:

•  Disconnect PC cable;


•  Insert battery;


•  Hold both ‘Volume Down’ and ‘Home’ keys and press Power-On.

.