Samsung GT-i9205 Galaxy Mega 6.3 LT Unbrick – Total Repair supported Repairing bricked Samsung I9205 is easy with the RIFF Box.

Note, one simple way to connect over JTAG – connect USB cable to PC and
insert battery. In this case phone is automatically powered on.

During Resurrection process you can select areas to be resurrected.
Select them wisely: selecting everything in one bunch may just increase
flashing time while it’s possible that all you need is to repair only
few certain areas.


To resurrect Samsung I9205:

•  Solder JTAG cable to Samsung I9205 JTAG pads;


•  Connect USB cable to phone and PC;


•  Insert battery;


•  Make sure Samsung I9205 is selected in the list of models;


•  Click Resurrect button;


•  Wait till software signals a successful operation completion;


•  Disconnect USB cable, de-solder JTAG wires;

Now phone is in bootable condition, that is, even if it does not
start up normally, you can flash it using original Samsung downloader
software to restore it to the working state.


To enter download mode:

•  Disconnect PC cable;


•  Insert battery;


•  Hold ‘Volume Down’ key and press Power-On.

.