Easy repair Samsung GT-S6310N Galaxy Young supported

Repairing bricked Samsung S6310N is easy with the RIFF Box.

Note, one simple way to connect over JTAG – connect USB cable to PC and
insert battery. In this case phone is automatically powered on, so no
need to press any power-on buttons on the phone keypad.

To resurrect Samsung S6310N:

•  Solder JTAG cable to Samsung S6310N JTAG pads;


•  Insert USB Data cable into board and PC;


•  Make sure Samsung S6310N is selected in the list of models;


•  Click Resurrect button;


•  Wait till software signals a successful operation completion;


•  Disconnect power supply, de-solder JTAG wires;

Now
phone is in bootable condition, that is, even if it does not start up
normally, you can flash it using known flashing methods.
.