Phone is auto powered on with USB Cable connected to the PC. Battery
presence is not required; connection can be established with detached
board.
Current resurrector contains Firmware and EEPROM zones for memory chip with ID 0x017E/0×0063.
To resurrect Alcatel C131:
- Solder JTAG cable to Alcatel C131 JTAG pads;
- Insert USB Data cable into board and PC;
- Make sure Alcatel C131 is selected in the list of models;
- Click Resurrect button;
- Choose which areas to flash;
- Wait till software signals a successful operation completion;
- De-solder JTAG wires;
.
0 comments:
Post a Comment