Easy repair CDMA ZTE C132 Striker supported Resurrecting ZTE C132 is simple.

Phone is auto powered on with USB Cable connected to the PC. Battery
presence is not required; connection can be established with detached
board.

Current resurrector contains Firmware and EEPROM zones for memory chip with ID 0x017E/0×0063.

To resurrect ZTE C132:

•  Solder JTAG cable to ZTE C132 JTAG pads;


•  Insert USB Data cable into board and PC;


•  Make sure ZTE C132 is selected in the list of models;


•  Click Resurrect button;


•  Choose which areas to flash;


•  Wait till software signals a successful operation completion;


•  De-solder JTAG wires;

.