HTC Droid DNA ADR6435 / Droid Incredible X (HTC DLX) Unbrick, Unlock, IMEI and SuperCID repair supported Repairing bricked HTC Droid DNA (PL8320000) is easy with the RIFF Box.

 Phone is auto powered on with USB Data Cable connected to the PC. Battery presence may be required.

In case you have no USB cable near, make sure battery is charged enough
and hold Power On button during initiation of JTAG connection.

Resurrector will reflash radio’s boot zone and will re-write PDA’s SPL
to 1.33.0001 version. Additionally to SPL and Radio zones, the zone
which contains Model ID may be re-flashed too. In this case after
resurrection the phone will have Model ID = ‘PL8320000’.

To resurrect HTC Droid DNA (PL8320000):

•  Solder JTAG cable to HTC Droid DNA (PL8320000) JTAG pads;


•  Insert USB Data cable into board and PC;


•  Make sure HTC Droid DNA (PL8320000) is selected in the list of models;


•  If you use battery, press Power On key;


•  Click Resurrect button;


•  Wait till software signals a successful operation completion;


•  Disconnect power supply, de-solder JTAG wires;

Now phone is in bootable condition, that is, even if it does not
start up normally, you can flash it using known flashing methods.

To enter download mode:

•  Disconnect PC cable;


•  Insert battery;


•  Hold ‘Volume Down’ key and press ‘Power ON’ button.

.

Read More

Samsung YP-G1CW / YP-G1CB Galaxy S WiFi Unbrick – Dead Boot repair supported Samsung YP-G1 is based on the S5PCxxx Processor (ARM core is Cortex-A8).

Note, one simple way to connect over JTAG – connect USB cable to PC and
insert battery. In this case phone is automatically powered on. But
note, in very rare cases it is possible that you will have to hold Power
On key during initial connection.

To resurrect Samsung YP-G1:

•  Solder JTAG cable to Samsung YP-G1 JTAG pads;


•  Connect microUSB cable to phone and PC;


•  Insert battery;


•  Make sure Samsung YP-G1 is selected in the list of models;


•  Make sure a fixed TCK frequency is selected;


•  Click Resurrect button;


•  Wait till software signals a successful operation completion;


•  Disconnect USB cable, de-solder JTAG wires;

Now phone is in bootable condition, that is, even if it does not
start up normally, you can flash it using original Samsung downloader
software to restore it to the working state.

To enter download mode:

•  Disconnect PC cable;


•  Insert battery;


•  Hold both ‘Volume Down’ and ‘Home’ keys and press Power-On.

.

Read More

Samsung GT-S6810P Galaxy Fame WORLD FIRST Boot repair support ! ! ! Repairing bricked Samsung S6810P is easy with the RIFF Box.

Note, one simple way to connect over JTAG – connect USB cable to PC and
insert battery. In this case phone is automatically powered on, so no
need to press any power-on buttons on the phone keypad.

To resurrect Samsung S6810P:

•  Solder JTAG cable to Samsung S6810P JTAG pads;


•  Insert USB Data cable into board and PC;


•  Make sure Samsung S6810P is selected in the list of models;


•  Click Resurrect button;


•  Wait till software signals a successful operation completion;


•  Disconnect power supply, de-solder JTAG wires;

Now phone is in bootable condition, that is, even if it does not
start up normally, you can flash it using known flashing methods.

To enter download mode:

•  Disconnect PC cable;


•  Insert battery;


•  Hold ‘Volume Down’ and ‘OK’ keys and press Power-On. And after you
  see the warning message press ‘Volume Up’ key to enter Download Mode.

.

Read More

ZTE Skate Acqua (V880) Unbrick -Dead boot repair supported Repairing bricked ZTE V880 is easy with the RIFF Box.

To resurrect ZTE V880:

•  Solder JTAG cable to ZTE V880 JTAG pads;


•  Make sure ZTE V880 is selected in the list of models;


•  Connect USB Data Cable;


•  Click Resurrect button;


•  Wait till software signals a successful operation completion;


•  Disconnect power supply, de-solder JTAG wires;

.

Read More

HTC One XL (HTC Evita) Unbrick – Dead boot, Unlock, SuperCID, IMEI repair supported Repairing bricked HTC OneXL (PJ8312000) is easy with the RIFF Box.

Phone is auto powered on with USB Data Cable connected to the PC. Battery presence may be required.

In case you have no USB cable near, make sure battery is charged enough
and hold Power On button during initiation of JTAG connection.

Resurrector will reflash radio’s boot zone and will re-write PDA’s SPL
to 1.09.0000 version. Additionally to SPL and Radio zones, the zone
which contains Model ID is re-flashed too. Thus after resurrection phone
will have Model ID = ‘PJ8312000’.

To resurrect HTC OneXL (PJ8312000):

•  Solder JTAG cable to HTC OneXL (PJ8312000) JTAG pads;


•  Insert USB Data cable into board and PC;


•  Make sure HTC OneXL (PJ8312000) is selected in the list of models;


•  If you use battery, press Power On key;


•  Click Resurrect button;


•  Wait till software signals a successful operation completion;


•  Disconnect power supply, de-solder JTAG wires;

Now phone is in bootable condition, that is, even if it does not
start up normally, you can flash it using known flashing methods.

To enter download mode:

•  Disconnect PC cable;


•  Insert battery;


•  Hold ‘Volume Down’ key and press ‘Power ON’ button.

.

Read More

Alcatel One Touch OT-995 Unbrick – Dead boot repair supported Repairing bricked Alcatel OT995 is easy with the RIFF Box.

To resurrect Alcatel OT995:

•  Solder JTAG cable to Alcatel OT995 JTAG pads;


•  Insert USB Data cable into board and PC;


•  Make sure Alcatel OT995 is selected in the list of models;


•  Click Resurrect button;


•  Choose which areas to flash;


•  Wait till software signals a successful operation completion;


•  De-solder JTAG wires;

.

Read More

G SU630 Unbrick – Dead boot repair supported Resurrecting LG SU630 is very easy but it requires non-beginner soldering skills (since JTAG pads on board are very small and are close to each other).

To resurrect LG SU630:

•  Solder JTAG cable to LG SU630 JTAG pads;


•  Insert USB Data cable into board and PC;


•  Make sure LG SU630 is selected in the list of models;


•  Click Resurrect button;


•  Wait till software signals a successful operation completion;


•  Disconnect power supply, de-solder JTAG wires;

Now phone is in bootable condition, that is, even if it does not
start up normally, you can flash it using known flashing methods.

.

Read More