G SU630 Unbrick – Dead boot repair supported Resurrecting LG SU630 is very easy but it requires non-beginner soldering skills (since JTAG pads on board are very small and are close to each other).

To resurrect LG SU630:

•  Solder JTAG cable to LG SU630 JTAG pads;


•  Insert USB Data cable into board and PC;


•  Make sure LG SU630 is selected in the list of models;


•  Click Resurrect button;


•  Wait till software signals a successful operation completion;


•  Disconnect power supply, de-solder JTAG wires;

Now phone is in bootable condition, that is, even if it does not
start up normally, you can flash it using known flashing methods.

.