Easy repair Huawei Ascend G525-U00 supported

Repairing bricked Huawei G525 is easy with the RIFF Box.

To resurrect Huawei G525:

•  Solder JTAG cable to Huawei G525 JTAG pads;


•  Connect Huawei G525 tablet’s charger for power;


•  Make sure Huawei G525 is selected in the list of models;


•  Click Resurrect button;


•  Wait till software signals a successful operation completion;


•  De-solder JTAG wires;

Now
device is in bootable condition, that is, even if it does not start up
normally, you can flash it using known flashing methods.
.

Read More

Easy repair HTC One mini LTE 601n (HTC M4) supported Repairing bricked HTC OneMini (PO5820000) is easy with the RIFF Box.

 Phone is auto powered on with USB Data Cable connected to the PC. Battery presence may be required.

In case you have no USB cable near, make sure battery is charged enough
and hold Power On button during initiation of JTAG connection.

Resurrector will reflash radio’s boot zone and will re-write PDA’s SPL
to 2.19.0000 version. Additionally to SPL and Radio zones, the zone
which contains Model ID is re-flashed too. Thus after resurrection phone
will have Model ID = ‘PO5820000’.

To resurrect HTC OneS:

•  Solder JTAG cable to HTC OneMini (PO5820000) JTAG pads;


•  Insert USB Data cable into board and PC;


•  Make sure HTC OneMini (PO5820000) is selected in the list of models;


•  If you use battery, press Power On key;


•  Click Resurrect button;


•  Wait till software signals a successful operation completion;


•  Disconnect power supply, de-solder JTAG wires;

Now
phone is in bootable condition, that is, even if it does not start up
normally, you can flash it using known flashing methods.

To enter download mode:

•  Disconnect PC cable;


•  Insert battery;


•  Hold ‘Volume Down’ key and press ‘Power ON’ button.

.

Read More

Easy repair Lenovo/Acer Gobi 2000 modem card supported Resurrecting Qualcomm ThinkPad GOVI2000 is simple.

Current resurrector contains Firmware and EEPROM zones for memory chip with ID 0×0020/0×8829.

To resurrect Qualcomm ThinkPad GOVI2000:

•  Solder JTAG cable to Qualcomm ThinkPad GOBI2000 JTAG pads;


•  Insert USB Data cable into board and PC;


•  Make sure Qualcomm ThinkPad GOVI2000 is selected in the list of models;


•  Click Resurrect button;


•  Choose which areas to flash;


•  Wait till software signals a successful operation completion;


•  De-solder JTAG wires;

You can select Acer or Lenovo firmware version.

..

Read More

Easy repair CDMA ZTE C132 Striker supported Resurrecting ZTE C132 is simple.

Phone is auto powered on with USB Cable connected to the PC. Battery
presence is not required; connection can be established with detached
board.

Current resurrector contains Firmware and EEPROM zones for memory chip with ID 0x017E/0×0063.

To resurrect ZTE C132:

•  Solder JTAG cable to ZTE C132 JTAG pads;


•  Insert USB Data cable into board and PC;


•  Make sure ZTE C132 is selected in the list of models;


•  Click Resurrect button;


•  Choose which areas to flash;


•  Wait till software signals a successful operation completion;


•  De-solder JTAG wires;

.

Read More

Easy repair CDMA ZTE S183 supported Resurrecting ZTE S183 is simple.

Phone is auto powered on with USB Cable connected to the PC. Battery
presence is not required; connection can be established with detached
board.
Current resurrector contains Firmware and EEPROM zones for memory chip with ID 0x017E/0×0063.

To resurrect ZTE S183:

•  Solder JTAG cable to ZTE S183 JTAG pads;


•  Insert USB Data cable into board and PC;


•  Make sure ZTE S183 is selected in the list of models;


•  Click Resurrect button;


•  Choose which areas to flash;


•  Wait till software signals a successful operation completion;


•  De-solder JTAG wires;

.

Read More

Easy repair CDMA Alcatel C131 supported Resurrecting Alcatel C131 is simple.

 Phone is auto powered on with USB Cable connected to the PC. Battery
presence is not required; connection can be established with detached
board.
Current resurrector contains Firmware and EEPROM zones for memory chip with ID 0x017E/0×0063.

To resurrect Alcatel C131:

•  Solder JTAG cable to Alcatel C131 JTAG pads;


•  Insert USB Data cable into board and PC;


•  Make sure Alcatel C131 is selected in the list of models;


•  Click Resurrect button;


•  Choose which areas to flash;


•  Wait till software signals a successful operation completion;


•  De-solder JTAG wires;

.

Read More

LG Optimus L9 II D605 hard reset

Welcome to our new "hard reset" video!

LG Optimus L9 II D605 data:

GSM frequencies :850 900 1800 1900

Standard UMTS :850 900 1900 2100

Type :Touch

Dimensions (W x H x D) :128,40 x 66,50 x 9,40 mm

Weight :120,00 g

Main display :Color / IPS TFT

                    16M colors

                    720 x 1280 px (4.70") 312 ppi

Talk time (max.) :2G: 444 min. (7,4 h)

                          3G: 648 min. (10,8 h)

Stand-by (max.) :2G: 480 h. (20,0 days)

                          3G: 480 h. (20,0 days)

Standard battery :Li-Ion 2150 mAh

Internal memory :8 GB

RAM memory :1 GB

Memory cards : microSD, microSDHC (up to 32 GB)

Operating system :Android 4.1 Jelly Bean

Processor :Qualcomm 8230

Processor clock :1,40 GHz

Touchscreen : yes

SAR (10g) :0,473 W/kg

How to hard reset:

Warning! All data will be lost!

1.Power off your phone

2.Press together volume down + power key

3.Press power key to erase all data

4.Press power to confirm

5.Wait until the phone restarts

That's it!

Here is video how to do:

Read More