mbacollegespune.in













Wednesday 24 April 2013

Samsung GT-S7500T Galaxy Ace Plus Unbrick – Dead boot repair supported Resurrecting Samsung S7500T is easy with RIFF Box.






Note, one simple way to connect over JTAG – connect USB cable to PC and
insert battery. In this case phone is automatically powered on, so no
need to press any power-on buttons on the phone keypad.


To resurrect Samsung S7500T:


  •  Solder JTAG cable to Samsung S7500T JTAG pads;

  •  Insert USB Data cable into board and PC;

  •  Make sure Samsung S7500T is selected in the list of models;

  •  Click Resurrect button;

  •  Wait till software signals a successful operation completion;

  •  Disconnect power supply, de-solder JTAG wires;



Now phone is in bootable condition, that is, even if it does not
start up normally, you can flash it using known flashing methods.


To enter download mode:


  •  Disconnect PC cable;

  •  Insert battery;

  •  Hold ‘Volume Down’ and ‘Home’ keys and press Power-On.



.


samsung_ace_plus


Android Mobile Doctor

0 comments:

Post a Comment

 

Copyright @ 2013-2015 Android Mobile Doctor.