mbacollegespune.in













Wednesday, 24 April 2013

Samsung S5750e Wave575 Unbrick – Dead boot repair supported Resurrecting Samsung S5750E is easy with RIFF Box.



To power the phone connect USB cable and insert battery. Sometimes it’s needed to press Power On key.


In case phone is not detected de-power phone completely, then wait few seconds, insert USB cable and then insert battery.


To resurrect Samsung S5750E:


  •  Solder JTAG cable to Samsung S5750E JTAG pads;

  •  Connect USB cable to phone and PC;

  •  Insert battery;

  •  Make sure Samsung S5750E is selected in the list of models;

  •  Click Resurrect button;

  •  Wait till software signals a successful operation completion;

  •  Disconnect USB cable, de-solder JTAG wires;



Now phone is in bootable condition, that is, even if it does not
start up normally, you can flash it using original Samsung downloader
software to restore it to the working state. We used MultiLoader 5.64
version.


To enter download mode:


  •  Disconnect PC cable;

  •  Insert battery;

  •  Hold both ‘Volume Down’ (on the left side of phone) and ‘Lock’ (right side bottom part) keys and press Power-On.



s5750e





Android Mobile Doctor

0 comments:

Post a Comment

 

Copyright @ 2013-2015 Android Mobile Doctor.