LG P930 Nitro HD Unbrick – Dead boot repair supported Repairing bricked LG P930 is easy with the RIFF Box

The device is based on the Qualcomm APQ8060 chipset.

Note, one simple way to connect over JTAG – connect USB cable to PC and
insert battery. In this case phone is automatically powered on.


To resurrect LG P930:

•  Solder JTAG cable to LG P930 JTAG pads;


•  Connect USB cable to phone and PC;


•  Insert battery;


•  Make sure LG P930 is selected in the list of models;


•  Click Resurrect button;


•  Wait till software signals a successful operation completion;


•  Disconnect USB cable, de-solder JTAG wires;

Now phone is in bootable condition, that is, even if it does not
start up normally, you can flash it using original Samsung downloader
software to restore it to the working state.