Vodafone 858 Smart (Huawei U8160) Unbrick – Dead boot repair supported Resurrecting Huawei U8160 is simple.

Connection can be established with charger connected while battery is inside.


To resurrect Huawei U8160:

•  Solder JTAG cable to Huawei U8160 JTAG pads;


•  Connect Huawei U8160 tablet’s charger for power;


•  Make sure Huawei U8160 is selected in the list of models;


•  Click Resurrect button;


•  Wait till software signals a successful operation completion;


•  De-solder JTAG wires;

Now device is in bootable condition, that is, even if it does not
start up normally, you can flash it using known flashing methods.


To enter download mode:

•  Disconnect PC cable;


•  Insert battery;


•  Hold ‘Volume Down’ key and press ‘Power ON’ button.

.